适用于 1.11 的可堆叠无损南瓜与西瓜农场设计
此农场使用了我在我的南瓜与西瓜农场合集中展示的某种收割机设计。
堆叠式的设计通常无法做到完全无损,因为活塞在伸出后往往会将物品推回其中。这可以通过在活塞正前方放置一堵石墙来解决。如果这样做,掉落物将被始终推向方块边缘。有些物品可能会被轻微地横向弹飞,从而导致它们反弹回来。为了解决这个问题,墙壁两侧的区域也必须用方块封闭,使掉落物没有机会反弹,只能直接落下。用于此目的的方块必须在一维方向上宽度为 1 格,而在另一维度上保留一定的空气间隙,因为全尺寸的 1x1 方块会导致掉落物被弹回。中间部分使用栅栏门,因为它们恰好宽 1 格,且两侧有足够的空气间隙。为了防止物品落在其他侧面上,我们使用活板门,因为它们更便宜、更容易放置,并且提供了更多的空气间隙。
虽然这种设计比大多数水平设计的方块用量更多,但它使用的科技类方块更少,并且不需要使用矿车轨道系统进行物品收集。每个单独的茎周围都尽可能多地环绕耕地,以使每个茎的西瓜/南瓜生成率提高约 80%。每一块额外的耕地都会被草绳、按钮或火把覆盖,以确保没有任何植物能在其上生长。
A stackable lossless pumpkin & melon farm design for 1.11
This farm uses one of the harvester designs shown in my pumpkin & melon farm collection.
Stacked designs usually are not 100% lossless since pistons have the tendency to also push items back into them after they have extended. This can be fixed by placing a single cobblestone wall right infront of the piston. If this is done the drops will always be pushed right over the edge of the block. There is a chance for some items to be flung slighty sideways which can cause them to bounce back again. To fix this both sides next to the wall have to be walled of so the items have no chance but to fall down right away. The blocks used for this have to be 1 block wide but have some air space in the other orientation since full 1x1 blocks will cause the drops to be flung back. For the middle section fence gates are used since they are exactly 1 block wide but have enough air space on both sides. To stop items from landing on the other sides trap doors are used since they are cheaper, easier to place and have even more air space.
While this design uses more blocks compared to most horizontal designs, it uses less tech-blocks and needs no rail system with minecarts for item collection. Each individual stem is surrounded with as much farmland as possible to increase the melon / pumpkin spawn rate by around 80% for each stem. Each additional piece of farmland is either covered with string, a button or a torch to make sure no plant can grow on top of it.
评论 0
登录后参与评分
还没有评论,来抢沙发吧