一个等待探索的广阔世界……但如果,你再也无法看见它呢?介绍一种全新的游戏玩法——Seeker Minecraft,在这里你只能看到自己已经探索过的土地!你将发现哪些奇迹?
Seeker Minecraft v1.1 现已可下载!请使用 1.8.2-pre4 版本,并降低渲染距离以避免影响体验!
MINECRAFT 版本: 本资源适用于 Minecraft 1.8.2-pre4,且支持多人游戏)
如果您希望在视频中使用 Seeker Minecraft 或将其集成到您的地图中,请注明我的 YouTube 频道(youtube.com/user/onnowhere2)并提供此下载页面的链接!
使用前必读:
v.1.1 新增功能
- 机器运行速度大幅提升!已修复因过多光照更新导致的问题。
- 输入 /gamerule SeekerMinecraft 1 可启用更消耗性能但工作效果更佳的水体修正功能,以解决水体删除方块的问题。
- 输入 /gamerule SeekerMinecraft 2 可禁用此功能。默认值为 2,每次机器关闭时都会重置为 2。
- 将钻石头盔重命名为 "Far View Helmet" 可将视距加倍(宽 13、长 13、高 7)。
简介:
Seeker Minecraft 被封装在一个小型基岩盒中,可放置于任何 Minecraft 世界中。Seeker Minecraft 提供了一种全新的游玩方式:你无法看到尚未探索的土地。当你投掷雪球或手动探索时,世界会逐渐变得生动起来!
玩法说明/功能:
- 你只能看到已探索过的土地!其他区域在踏入其中或向其投掷雪球之前都是空的。
- 下落的沙子、雪球和玩家都会导致该实体周围的土地加载出来。
- 当生物处于已加载区域的边缘并被击中时会消失,但它们实际上仍然存在!它们可能会走回已加载区域,或者在你走向它们并加载相应区域后重新出现。请注意,即使生物不在已加载区域内,它们仍然可以追踪你!
- 在加载树木时,如果树叶未完全加载,稍后树木加载完成时树叶可能会枯萎,这解释了为什么树叶可能会缺失。
- 如果地面本身未加载或部分未加载,草、蘑菇、花朵、杠杆、红石等方块可能会被破坏。
- Seeker Minecraft 在下界和末地同样有效!如需禁用此功能,你可以移除机器内的两个传送门。
- 注意:下界传送门可能会出现不同步的情况。
- 注意:水的加载可能会出现卡顿或延迟问题,因此如果是小湖泊,请尝试在继续前进前加载整个湖泊。这是由于水会克隆到实际世界下方极远处的空区域中,这可能会删除上方世界中的方块。在水域区域加载完成后,这通常不再是问题。由于水流发生在实际世界所在的位置,并且水流会被再次克隆上来,从而移除部分陆地,因此在建造位于未完全加载的水域下方时要小心。
- 有时,由于延迟,移动时世界可能加载不够快。在这种情况下,请确保不要继续行走,否则你可能会走出边缘,一旦命令方块追上进度,你就会进入地下加载的方块中并窒息。
- 末地小贴士——你可能希望在与龙战斗之前先加载尽可能多的岛屿,因为龙只会出现在已加载的区域。由于 Seeker Minecraft 和龙的运作机制,当你看到龙时,它很可能正从世界所在的高 Y 轴高度向下钻入地面,所以要注意龙突然进出地面的情况 :o!
使用结构图:
- 将结构图放入你的世界时,请确保将其放置在高度限制范围内,并位于出生点区块内!
- 注意:如果你放入结构图的世界中有高于 y=128 的方块,当 Seeker Minecraft 激活时它们将不会显示,并且在被加载后会被永久删除!
减少延迟:
- 如果你想减少由命令方块引起的延迟,建议在远离命令方块的区域开始建造,确保命令方块不再被加载。
- 水和因上方空气区域克隆陆地而产生的光照更新可能是主要的延迟来源。
- 另一个减小延迟的小技巧(可能对性能产生明显或不明显的改善)是走到机器的后方,从左下角向左两格、向上两格的位置,破坏那里的基岩方块并移除第一个红石块,然后用基岩填回空洞。这将移除前面提到的略微缓解水流/岩浆流问题的部分。
- 为了进一步降低延迟,你可以在不探索时关闭机器。
下载包包含:
- 预配置的生存世界下载文件,内含命令方块
- 命令方块的 Schematic 结构图
玩法:
由 Logdotzip 制作!
由 Antvenom 制作!(此时我意识到需要 1.8.2-pre4)
A whole world to explore...but what if, you could no longer see it? Introducing a new way to play the game - Seeker Minecraft, where you can only see the land that you have explored! What wonders will you discover?
Seeker Minecraft v1.1 is now downloadable! Please use 1.8.2-pre4 and play on a lower render distance to not disrupt the experience!
MINECRAFT VERSION: This is made for Minecraft version 1.8.2-pre4 and IS multiplayer compatible)
If you would like to use Seeker Minecraft in your video or implement it in your map, please leave a credit to my Youtube Channel (youtube.com/user/onnowhere2) and a link to this download!
READ BEFORE USE:
NEW FEATURES OF v.1.1
- The machine runs much faster now! The problem with too many lighting updates is now fixed.
- Type /gamerule SeekerMinecraft 1 to enable the more laggy, but better working, water correcting function
to fix water deleting blocks.
- Type /gamerule SeekerMinecraft 2 to disable this. Default is 2 and will reset to 2 every time the machine
is turned off.
- Rename a diamond helmet to "Far View Helmet" to enable double the view range (13 wide by 13 long by 7 high).
DESCRIPTION:
Seeker Minecraft is contained in a small bedrock box that can be placed within ANY minecraft world. Seeker Minecraft is a new way to play Minecraft in which you cannot see the land that you have not yet explored. The world will come to life as you explore it by either throwing snowballs or manually exploring the land!
Gameplay notes/Features:
- You can only see the land that you have explored! Everything else is empty until you step inside it or throw a snowball to it.
- Falling sand, snowballs, and players will all cause the land to load around that entity.
- Mobs when hit over the edge of loaded areas will disappear, but they are still there! They may walk back
into the loaded area or may appear again if you walk towards them and load that area. Note that mobs can
still track you when they are not in loaded areas!
- When loading trees, if the leaves are not fully loaded, leaves may have decayed once the tree is loaded later,
which would explain why leaves may be missing.
- Grass, mushrooms, flowers, levers, redstone, etc. may break if the ground itself is not loaded or half of
it is not loaded.
- Seeker Minecraft continues to work within the Nether and the End! To disable this, you can remove the two
portals inside the machine.
- CAUTION: Nether portals will desync.
- Note that water can be glitchy and/or laggy to load, so if it is a small lake, try to load the entire lake
before continuing. This is due to water being cloned that moves into the empty area far below where the
actual world is and this can delete blocks in the world above. This should not be a problem after the water
in the area is already loaded. Water can remove land around it once loaded due to water flow occuring where
the actual world is located and the water flow is, as a result, cloned up again, removing parts of the land
so be careful building under where water is not completely loaded.
- Sometimes, due to lag, the world may not load fast enough while travelling. In these cases, make sure not to
continue walking or you may walk off the edge and end up loading blocks underground once the command blocks
catch up, causing you to suffocate.
- Tips when in the End - You would probably want to load as much of the island first before fighting the dragon,
as the dragon will only appear over loaded areas. Due to the way Seeker Minecraft and dragons work, the
dragon, when you see it, will most likely be headed downwards into the ground from the high y altitude the
world is located at, so watch out for the dragon popping in and out of the ground :o!
Using the Schematic:
- When putting the schematic into your world, make sure to put it at the HEIGHT LIMIT and within SPAWN CHUNKS!
- CAUTION: If the world you are putting the schematic into has any blocks above y=128, they will not appear
when Seeker Minecraft is active and WILL be erased if they are loaded!
Lag reduction:
- If you would like to reduce the lag that is caused by the command blocks, it is suggested to begin building
in an area far from the command blocks where the command blocks are no longer loaded.
- Water, and lighting updates from the world as land is cloned in above air, can be large sources of lag.
- Another small lag reducer (that may or may not have a noticeable change in performance) is to go to the back
of the machine, go two blocks to the left and two blocks up from the bottom left corner and break the
bedrock block and remove the first redstone block, then fill the hole back with bedrock. This will remove
the part that slightly reduces the water/lava flow problem mentioned earlier.
- To lower lag even more, you can turn off the machine when you are not exploring.
Download comes with:
- Pre-setup survival world download with command blocks
- Schematic of command blocks
Gameplay:
By Logdotzip!
By Antvenom! (whereupon I realize the need for 1.8.2-pre4)
评论 0
登录后参与评分
还没有评论,来抢沙发吧