
一款关于动力、热量与钢铁的技术模组:建造机器,实现自动化生产,并扩展至工业级多方块阵列。
简介
Arcforge 是一款面向 NeoForge 平台、适配 Minecraft 26.3 的 Forge Energy (FE) 技术模组。燃烧燃料或接入岩浆以获取热量,将热量转化为动力,将煤炭炼成焦炭,锻造钢铁,并从单机设备扩展至多方块阵列。
所有机器均通过 NeoForge 的标准能力(capabilities)暴露能量、流体和物品接口,因此 Arcforge 可与任何支持 FE 的其他模组的线缆、管道和机器兼容。
? 动力与热量
Arcforge 运行于两个相互关联的系统:FE 和 热量 (HU)。涉及热量的机器具有真实的温度属性,热量仅从高温流向低温,且更高的输入温度能带来更高的发电效率。
- 燃烧厂 (Combustion Plant):直接将煤炭燃烧转化为 FE。简单直接,但效率最低。
- 火箱 (Firebox):燃烧固体燃料产生热量。
- 燃料燃烧器 (Fuel Burner):燃烧如杂酚油等液体燃料以产生热量。燃料配方基于数据驱动,整合包可添加自定义燃料。
- 地热厂 (Geothermal Plant):从其储罐中抽取岩浆的热量,同时通过与岩浆块接触被动吸收热量。
- 热电厂 (Thermoelectric Plant):将热量转换为 FE。输入温度越高,效率越高;当温度足够高时,其转换效率甚至可超过 100%。
? 钢铁
- 碳化炉 (Carbonizer):一个可扩展的多方块焦炭炉,最多拥有 8 个腔室,可将煤炭烘焙为 煤焦 (coal coke) 并收集 杂酚油 (creosote)。更大的腔室意味着可以处理更大批次的原料。
- Arcforge 熔炉 (Arcforge Furnace):一座宏伟的 3x3x6 砖砌多方块结构。燃烧煤焦将其加热至 1,200°C 以上,随后将铁矿石与煤焦冶炼为 钢 (steel),副产品为 矿渣 (slag)。
⚙️ 加工
每台加工设备都提供单方块版本以及一个 3x3x3 的多方块 阵列 (Array),该阵列拥有三条并行处理通道,能以更低的能耗实现更快的处理速度。
- 电弧破碎机 / 电弧破碎阵列 (Arc Crusher / Arc Crushing Array):将矿石粉碎为粉末,并提供额外产出。阵列模式可使矿石产量 翻倍。
- 感应熔炉 / 感应熔炉阵列 (Induction Furnace / Induction Furnace Array):使用 FE 执行任何具备熔炉配方的冶炼操作。
- 金属压机 / 金属压制阵列 (Metal Press / Metal Pressing Array):利用可更换、可重复使用的模具将钢材压制成板材、齿轮和棒材。每个阵列通道均可独立持有自己的模具。
- 纤维化机 (Fiberizer):结合热量与 FE,将矿渣和玄武岩纺丝制成 矿渣羊毛 (Slag Wool) 和 岩石羊毛 (Rock Wool)。
- 浸渍机 (Infuser):将木材浸泡在杂酚油中以制作 防腐木 (Treated Wood)。
所有配方均为数据驱动,因此数据包和其他模组可以添加自定义配方。
? 建筑方块
全套 防腐木 (Treated Wood) 系列:原木、木板、楼梯、台阶、栅栏、栅栏门、木门、陷阱门、压力板和按钮。此外还包括 Arcforge 熔炉砖、砖墙,以及用于存储钢和煤焦的存储方块。
? 物流与存储
导管、储罐和储能单元共有四个等级:熟铁 (Wrought)、回火 (Tempered)、硬化 (Hardened) 和 Arcforge (Arcforged)。
- 导管 (Conduits):用于传输能量、物品、流体和热量。玻璃材质的物品和流体导管会显示内部流动的内容物,而能量和热量导管在活跃时会发光。
- 流体储罐 (Fluid Tanks):显示内容物并发光。使用扳手拾取时可保留其中的流体。
- 储能单元 (Energy Cells):容量从 500,000 FE 到 2.56 亿 FE 不等。
- 储热单元 (Heat Cells):用于储存热量,但热量会缓慢泄漏。更高等级的绝缘性能更好。
?️ 控制与升级
- 速度、能量和热量升级 可用于提升机器性能,绝缘升级 可减少储热单元的泄漏。
- 逐面侧边配置:支持对每台机器、储罐和储能单元的各个侧面进行独立配置。
- 红石控制:支持常开、信号开启或信号关闭模式。
- 扳手 (Wrench):用于旋转机器、配置导管、检查多方块结构,并在保持内容和设置不变的情况下拾取机器。
- 比较器支持:适用于储罐和储能单元。
⚖️ 可配置性
平衡数值(热量与 FE 速率、缓冲大小、温度、燃烧速度、效率、多方块限制等)可在 config/arcforge-common.toml 中进行调整,使 Arcforge 易于融入任何整合包。
依赖要求
许可
Arcforge 根据 MIT 许可证发布。源代码可在 GitHub 上获取。

A tech mod of power, heat, and steel: build machines, automate production, and scale up to industrial multiblock arrays.
About
Arcforge is a Forge Energy tech mod for Minecraft 26.3 on NeoForge. Burn fuel or tap into lava for heat, turn that heat into power, bake coal into coke, forge steel, and scale up from single machines to multiblock arrays.
Every machine exposes energy, fluids, and items through NeoForge's standard capabilities, so Arcforge works with cables, pipes, and machines from any other FE mod.
? Power & Heat
Arcforge runs on two connected systems: FE and heat (HU). Heat machines have a real temperature, heat only flows from hotter to colder, and hotter heat converts to power more efficiently.
- Combustion Plant burns coal directly into FE. Simple, but the least efficient.
- Firebox burns solid fuel into heat.
- Fuel Burner burns liquid fuels like creosote into heat. Fuels are data-driven, so packs can add their own.
- Geothermal Plant draws heat from lava in its tank, plus passive heat from touching lava and magma blocks.
- Thermoelectric Plant converts heat into FE. The hotter the input, the higher the efficiency, and running hot enough pushes it past 100%.
? Steel
- Carbonizer is a scalable multiblock coke oven with up to 8 chambers that bakes coal into coal coke and collects creosote. Bigger chambers bake bigger batches.
- Arcforge Furnace is a towering 3x3x6 brick multiblock. Burn coal coke to heat it past 1,200°C, then smelt iron and coke into steel, with slag as a byproduct.
⚙️ Processing
Every processing machine has a single-block version and a 3x3x3 multiblock Array with three parallel lanes that run faster on less energy.
- Arc Crusher / Arc Crushing Array crushes ores into dusts, with bonus outputs. The Array doubles ore yield.
- Induction Furnace / Induction Furnace Array smelts anything with a furnace recipe using FE.
- Metal Press / Metal Pressing Array presses steel into plates, gears, and rods using swappable, reusable dies. Each Array lane holds its own die.
- Fiberizer uses heat and FE to spin slag and basalt into Slag Wool and Rock Wool.
- Infuser soaks wood in creosote to make Treated Wood.
All recipes are data-driven, so datapacks and other mods can add their own.
? Building Blocks
A full Treated Wood set: logs, planks, stairs, slabs, fences, gates, doors, trapdoors, pressure plates, and buttons. Also Arcforge Furnace Bricks, brick walls, and storage blocks for steel and coal coke.
? Logistics & Storage
Conduits, tanks, and cells come in four tiers: Wrought, Tempered, Hardened, and Arcforged.
- Conduits for energy, items, fluids, and heat. Glass item and fluid conduits show what's flowing through them, and energy and heat conduits glow while active.
- Fluid Tanks that show and glow with their contents. Pick one up with the wrench to keep its fluid.
- Energy Cells from 500,000 FE up to 256 million FE.
- Heat Cells store heat, but it slowly leaks away. Higher tiers are better insulated.
?️ Control & Upgrades
- Speed, Energy, and Heat upgrades for machines, and Insulation upgrades to slow Heat Cell leakage.
- Per-face side configuration for every machine, tank, and cell.
- Redstone control: always on, on with signal, or on without signal.
- Wrench to rotate machines, configure conduits, check multiblock structures, and pick up machines with their contents and settings intact.
- Comparator support for tanks and cells.
⚖️ Configurable
Balance values (heat and FE rates, buffer sizes, temperatures, burn speeds, efficiency, multiblock limits) can be tuned in config/arcforge-common.toml, making it easy to fit Arcforge into any modpack.
Requirements
License
Arcforge is released under the MIT License. Source code is available on GitHub.
评论 0
登录后参与评分
还没有评论,来抢沙发吧