? CineCam
CineCam 是一款用于在 Minecraft 中创建电影级摄像机动画的极简工具。
? 直接在游戏内制作流畅的穿越镜头、静态镜头、剪辑、摄像机路径和实体跟踪场景。该模组提供了舒适的自由视角(Free Cam)、可视化关键点编辑器以及快速预览系统,让你能够无需繁琐操作即可构建电影级镜头。
✨ 功能特性
- ? 自由视角 (Free Cam):允许在世界中自由移动摄像机。
- ? 基于关键点的摄像机系统:使用飞行点和静态点构建路径。
- ? 平滑过渡:摄像机关键点之间的平滑移动。
- ✂️ 即时切换:用于实现干脆利落电影剪辑效果的瞬间切换。
- ? 实体跟踪:在摄像机移动过程中跟踪实体。
- ? 自定义参数:支持调整视场角 (FOV)、偏航角 (yaw)、俯仰角 (pitch)、停留时间和行程时间。
- ? 预览选中项 和 预览全部:快速测试你的场景。
- ? 保存与加载:从
cinecam/scenes/default.json 保存和加载场景。
- ?️ 世界内关键点编辑:带有可视化标记和摄像机方向线。
- ⚙️ 自由视角设置:速度、疾跑倍率、移动平滑度、FOV 和界面语言。
- ? 动作捕捉:自由视角跟踪,用于制作穿越镜头。
? 快速开始
- 进入一个世界并运行:
/cinecam
-
? 使用 WASD、空格键 和 Shift 移动自由视角。
疾跑键会增加移动速度。
-
⌨️ 按 G 打开 CineCam 编辑器。
-
➕ 添加摄像机关键点:
- ✈️ + 飞行点 — 用于平滑摄像机移动的点。
- ? + 静态点 — 用于静态镜头的点。
-
? 调整关键点设置并按 Apply(应用)。
-
▶️ 开始预览:
- ?️ 预览选中项 — 从选中的关键点开始预览。
- ? 预览全部 — 预览完整场景。
? G 键可以在标准的 Minecraft 按键绑定菜单中更改。
? 关键点设置
每个摄像机关键点都可以进行精确调整:
- ? X / Y / Z — 摄像机在世界中的位置。
- ? Yaw / Pitch — 摄像机的旋转和倾斜角度。
- ? FOV — 视场角,范围从
1 到 179 度。
- ⏸️ Hold(停留)— 摄像机在该关键点停留的时间(秒)。
- ✈️ Travel(行程)— 从该关键点移动到下一个关键点所需的时间。
- ? Next(下一点)— 下一个关键点的编号。
0 会自动按顺序选择下一个关键点。
- ? Track(跟踪)— 客户端侧实体的 ID,用于跟踪。
-1 禁用跟踪。
- ? Track smoothing(跟踪平滑度)— 跟随目标时摄像机跟踪的平滑程度。
?️ 过渡与路径
CineCam 支持不同的摄像机移动风格:
- ? MOVE — 关键点之间的平滑移动。
- ✂️ CUT — 在 Hold(停留)时间结束后立即切换。
- ? SMOOTH — 柔和的加速和减速。
- ➡️ LINEAR — 恒定的移动速度。
- ? SPLINE — 通过附近关键点形成的平滑 Catmull-Rom 样条曲线路径。
? Pick target(选择目标)会使用你在打开编辑器之前注视的那个实体。
⌨️ 命令
/cinecam
? 开启或关闭自由视角。
/cinecam on
/cinecam off
✅ 明确启用或禁用自由视角。
/cinecam editor
? 打开 CineCam 编辑器。
/cinecam preview
/cinecam stop
▶️ 开始或停止预览。
/cinecam save
/cinecam load
? 保存或加载场景。
/cinecam settings
⚙️ 打开设置,调整自由视角速度、疾跑倍率、移动平滑度、FOV 以及 CineCam 的语言。
? 世界内编辑
CineCam 允许你直接在世界中编辑摄像机关键点:
- ?️ 注视关键点标记时按下攻击键以选中它。
- ? 按住 Alt 并使用 WASD、空格键 和 Shift 移动选中的关键点。
- ↔️ Alt + 方向键 调整偏航角和俯仰角。
- ? Alt + Page Up / Page Down 调整翻滚角。
可视化工具让场景构建更加轻松:
- ? 蓝色线条显示摄像机路径。
- ? 橙色线条显示摄像机注视方向。
- ? 选中关键点的 XYZ 轴分别用红色、绿色和蓝色表示。
? 适用人群
CineCam 专为预告片创作者、电影视频制作者、角色扮演(RP)场景、建筑展示、Machinima 项目以及任何需要比默认 Minecraft 摄像机更多控制权的用户而设计。
✨ 构建场景,微调摄像机运动,预览你的镜头,像使用真正的电影摄像机工具一样拍摄 Minecraft。
? CineCam
CineCam is a minimalistic tool for creating cinematic camera animations in Minecraft.
? Create smooth flythroughs, static shots, cuts, camera paths, and entity-tracking scenes — directly inside the game. The mod adds a comfortable Free Cam, a visual point editor, and a quick preview system, so you can build cinematic shots without unnecessary hassle.
✨ Features
- ? Free Cam for freely moving the camera around the world.
- ? Point-based camera system: build paths using flight and static points.
- ? Smooth transitions between camera points.
- ✂️ Instant cuts for sharp cinematic edits.
- ? Entity tracking during camera movement.
- ? FOV, yaw, pitch, hold time, and travel time customization.
- ? Preview selected and Preview all for quickly testing your scene.
- ? Save and load scenes from
cinecam/scenes/default.json.
- ?️ In-world point editing with visual markers and camera direction lines.
- ⚙️ Free Cam settings: speed, sprint multiplier, movement smoothing, FOV, and interface language.
- ? Motion Capture: Free camera tracking for creating flythroughs.
? Quick Start
- Enter a world and run:
/cinecam
-
? Move the Free Cam using WASD, Space, and Shift.
The sprint key increases movement speed.
-
⌨️ Press G to open the CineCam editor.
-
➕ Add camera points:
- ✈️ + Flight — a point for smooth camera movement.
- ? + Static — a point for a static shot.
-
? Adjust the point settings and press Apply.
-
▶️ Start a preview:
- ?️ Preview selected — preview from the selected point.
- ? Preview all — preview the full scene.
? The G key can be changed in the standard Minecraft key bindings menu.
? Point Settings
Each camera point can be adjusted precisely:
- ? X / Y / Z — camera position in the world.
- ? Yaw / Pitch — camera rotation and tilt.
- ? FOV — field of view from
1 to 179 degrees.
- ⏸️ Hold — how long the camera stays on this point, in seconds.
- ✈️ Travel — how long it takes to move from this point to the next one.
- ? Next — the next point number.
0 automatically selects the next point in order.
- ? Track — client-side entity ID for tracking.
-1 disables tracking.
- ? Track smoothing — smoothness of camera tracking when following a target.
?️ Transitions and Paths
CineCam supports different camera movement styles:
- ? MOVE — smooth movement between points.
- ✂️ CUT — an instant cut after the Hold time.
- ? SMOOTH — soft acceleration and deceleration.
- ➡️ LINEAR — constant movement speed.
- ? SPLINE — smooth Catmull-Rom path through nearby points.
? Pick target uses the entity you were looking at before opening the editor.
⌨️ Commands
/cinecam
? Toggle Free Cam on or off.
/cinecam on
/cinecam off
✅ Explicitly enable or disable Free Cam.
/cinecam editor
? Open the CineCam editor.
/cinecam preview
/cinecam stop
▶️ Start or stop the preview.
/cinecam save
/cinecam load
? Save or load the scene.
/cinecam settings
⚙️ Open settings for Free Cam speed, sprint multiplier, movement smoothing, FOV, and CineCam language.
? In-World Editing
CineCam lets you edit camera points directly in the world:
- ?️ Press the attack button while looking at a point marker to select it.
- ? Hold Alt and use WASD, Space, and Shift to move the selected point.
- ↔️ Alt + Arrow Keys adjust yaw and pitch.
- ? Alt + Page Up / Page Down adjust roll.
Visual helpers make scene building easier:
- ? The blue line shows the camera path.
- ? The orange line shows the camera look direction.
- ? The selected point’s XYZ axes are colored red, green, and blue.
? Who Is This Mod For?
CineCam is made for trailer creators, cinematic video makers, RP scenes, build showcases, machinima projects, and anyone who needs more control than the default Minecraft camera can provide.
✨ Build scenes, tune camera movement, preview your shots, and film Minecraft like you are using a real cinematic camera tool.
评论 0
登录后参与评分
还没有评论,来抢沙发吧