NEW: Correlated 已为 Fabric/Quilt 1.19.2 重新构想为 Excorrelation。
Correlated 是一个数字存储模组,最初是因为在 1.8 版本中缺乏 Applied Energistics(应用能源)而创建的。它与 Refined Storage(精致存储)在同一天发布。Correlated 一直维护到 1.12 版本,并且野心逐渐增大;这些野心最终导致了它的失败,在 1.12 周期内从未实现过稳定发布。它因其良好的用户体验和一致的美学风格而广受好评。
要在 2.x 版本开始使用,所有内容都可以直接合成,因为地牢维度从未完成。你需要一个控制器(Controller)、驱动器舱(Drive Bay)和内存舱(Memory Bay)。查看 JEI 以获取更多信息。
要在 0.x 和 1.x 版本开始使用,你必须在地下城中找到 Enderic Processor(末影处理器),并使用它来合成控制器。除了控制器之外,你还需要一个驱动器舱。查看 JEI 以获取更多信息。
所有与控制器直接接触的 Correlated 网络方块(控制器、驱动器舱等),递归地被视为网络的一部分。
在所有版本中,一旦你拥有一个系统(终端通常也被认为很有用),你可以从许多不同的支持 API(包括 MJ、RF、FE、EU、Tesla 和 Neon)向控制器发送电力,以为网络供电。0.x/1.x 版本的功耗与部件数量成正比,而在 2.x 版本中,功耗保持稳定,并在系统使用时暂时出现峰值。驱动器存储物品,内存存储物品类型。你需要两者保持合理的平衡,才能拥有一个正常工作的存储系统。
较新版本拥有无线系统,提供三种可能的方法:光学、信标和微波。
- 光学是最基本的短距离无线通信,它将连接的系统暴露为一个 APN,可由无线终端或另一个控制器使用
- 信标透镜可以放置在点亮的信标上方,以反射其范围内的 APN(因此,它必须与光学收发器结合使用,或者处于另一个信标透镜的范围内)
- 微波光束通过右键点击放置在方块上的物品来配对,并使得两个系统在任何距离下连接,只要存在视线即可
NEW: Correlated has been reimagined for Fabric/Quilt 1.19.2 as Excorrelation.
Correlated is a digital storage mod, originally created due to a lack of Applied Energistics on 1.8. It and Refined Storage were released on the same day. Correlated was maintained up through 1.12, and became gradually more ambitious; those ambitions became its downfall, never seeing a stable release during the 1.12 cycle. It's generally well regarded for good user experience and a consistent aesthetic.
To get started in 2.x, everything can be crafted outright, as the dungeon dimension was never finished. You will need a Controller, Drive Bay, and Memory Bay. Check JEI for more info.
To get started in 0.x and 1.x, you must find an Enderic Processor in a dungeon and use that to craft the Controller. You will need a Drive Bay in addition to the Controller. Check JEI for more info.
All Correlated network blocks (Controller, Drive Bay, etc) that have direct contact with a Controller, recursively, are considered part of the network.
In all versions, once you have a system (A Terminal is also generally considered useful.) you can send power from many different supported APIs (including MJ, RF, FE, EU, Tesla, and Neon) into the Controller to power the network. Power usage in 0.x/1.x is proportional to the number of parts, and in 2.x it's steady and spikes temporarily when the system is used. Drives store items, Memory stores kinds of items. You need both in a reasonable balance to have a functioning storage system.
Newer versions have a wireless system with three possible methods; Optical, Beacon, and Microwave.
- Optical is very basic short-range wireless, that exposes its connected system as an APN, usable by a Wireless Terminal or another Controller
- Beacon Lenses can be placed above lit beacons to reflect an APN that's within its range (as such, it must be combined with an Optical Transceiver or be in range of another beacon lens)
- Microwave Beams are paired to eachother by right-clicking the item on a placed block, and cause two systems to be connected together over any distance, so long as there is line of sight
评论 0
登录后参与评分
还没有评论,来抢沙发吧