Craftomatic
根据模板自动合成新物品。
注意:目前处于测试阶段,我们正在尝试两种类型的合成器:一种是被动的,你只需在下方放置漏斗即可收集物品;另一种是主动的,行为类似于发射器,就像 Minecraft 1.21 原版中的合成器一样。我们尚未确定是否会保留这两种类型。
此方块允许你自动合成物品。你将一个物品放入左侧槽位,网格将更新以显示合成它所需的物品。如果可以使用多种物品(例如染料),模板物品上方和下方会出现箭头,让你选择想要的特定配方。你也可以在悬停在模板物品上时使用鼠标滚轮来切换配方。
这与 1.21 原版的合成器有何不同?
此方块使用模板来告诉合成器你想制作什么。有了这些信息,它可以从周围放置的漏斗中拉取适当的物品。这意味着你可以让每个漏斗只容纳一种物品类型,而合成器知道该做什么。
将物品放入左侧孔洞,它会显示预期物品的幽灵物品预览。
如果你有一个可以通过多种方式合成的物品,它会提供箭头来选择你想要提供的输入原料。
漏斗(被动)变体
在这种设置中,你只需要在合成器下方放置一个漏斗来接收结果。在此变体中,你可以在合成器周围放置最多 5 个输入漏斗,因此它可以在一个周期内拉取最多 5 种物品。
对于会留下剩余物品的合成,例如蜂蜜瓶 -> 蜂蜜块会留下空的蜂蜜瓶,这些物品也会从底部流出。在剩余物品全部消失之前,不会进行任何合成。
发射器变体
这个变体更像即将推出的原版合成器,因为它像发射器一样工作,并且需要红石信号才能以相同的方式运行。它甚至有一个“嘴”!由于它需要动力,你只能在其周围放置最多 4 个漏斗,因此它的输入速度稍慢。然而,当合成会留下剩余物品的物品时,发射器变体会尝试与结果物品一起吐出所有剩余物品,而漏斗变体必须等待足够的周期使网格清空后才能开始合成新物品。
优缺点
两种变体都有优缺点。个人而言,虽然最初倾向于发射器变体,但我发现自己更常使用被动变体,因为它更简单(不涉及红石时钟)。被动变体也易于拼接用于分类器等用途,而发射器变体需要动力,这可能会影响附近的组件。这可能可行,但更难实现。发射器变体可能更快,因为它可以运行在红石时钟上,而被动变体只能以漏斗的速度运行。漏斗变体只能从底部输出,而发射器变体是有方向的。
状态化合成
如果你不放入模板物品,工作台将表现为状态化合成器。这意味着如果你开始合成某物但忘记了某些东西,当你关闭界面时,物品仍在工作台中。否则,它的行为应该像一个普通的合成台。
合成配方
有两种变体的配方。关键区别在于底部的物品。对于被动变体,使用红石块(代表它是自供电的)。对于发射器变体,则使用发射器。
Craftomatic
Automatically crafts new items based on a template.
NOTE: This is beta and we are experimenting with two types of crafters: a passive one which you can simply
put a hopper under to collect items, and an active one which behaves like a dropper, like the
vanilla Crafter in Minecraft 1.21. It's unclear whether we'll keep both.
This block allows you to automatically craft items. You place an item into the left slot, and the grid will
update to show you the items it needs to craft it. If multiple items could be used (as in the case of dyes),
arrows will appear above and below the template item to allow you to choose the specific recipe you want. You
can also use the scroll wheel while hovering over the template item to switch between recipes.
How is this different than the Vanilla Crafter in 1.21?
This block uses a template to tell the crafter what you want to make. With that knowledge, it can pull in the
appropriate items from hoppers place around it. This means you can make each hopper only hold one item type
and the crafter knows what to do.
Drop an item in the left well and it will show the ghost items for what it expects.
If Instead you have an item that can be crafted in several ways, it will provide arrows to select the input
ingredients you want to provide.
Hopper (Passive) Variant
In this setup, you only need to place a hopper underneath the crafter to receive the results. In this variant,
you can up up to 5 input hoppers around the crafter, so it can pull in up to 5 items in once cycle.
For items that leave items behind, e.g. honey bottles -> honey blocks will leave empty honey bottles, those
items will also flow out the bottom. No item will craft until remaining items are all gone.
Dropper Variant
This one behaves more like the upcoming Vanilla crafter in that it works like a dropper and requires a Redstone
signal to make it work in the same way. It even has a mouth! Due to the fact that it requires power, you can
only put up to 4 hoppers around it, so it can't input quite as fast. However, when crafting items that leave
items behind, the dropper variant will attempt to spit all of them out with the result item at the same time,
while the hopper variant has to wait for enough cycles for the grid to clear before it starts crafting new
items.
Pros and Cons
There are pros and cons to both variants. Personally, while originally gravitating towards the dropper variant, I
have found myself using the passive variant because it's just simpler (no Redstone clock involved). The passive
variant also is easily tileable for use in a sorter, etc. while the dropper variant requires power which might affect
a nearby component. It might be workable, but it's harder. The dropper variant can be faster, as it can run on a
redstone clock whereas the passive variant can operate only at hopper speed. The hopper variant can only output from
the bottom, whereas the dropper variant is directional.
Stateful Crafting
If you don't put a template item in, the table behaves as a stateful crafter. What that means is if you start
to craft something and forgot something, when you close the UI, the items are still in the table. It should
otherwise behave like a normal crafting table.
Crafting Recipes
There are two recipes for the two variants. The key difference is the item at the bottom. For the passive
variant, a Redstone block is used (to represent that it is self-powered). For the dropper variant, a dropper
is used instead.
评论 0
登录后参与评分
还没有评论,来抢沙发吧