Create: Envelope Compat
搭建 Create 与 Envelope 之间的桥梁
? 这是什么?
Create: Envelope Compat 让 Create 包裹和 Envelope 包裹 成为同一事物。不再需要在自动化友好的 Create 箱子和 Envelope 的邮件系统之间做出选择——你可以同时拥有两者,无缝衔接。
构建全自动的邮件室,让 Create 的打包机、机械臂、漏斗和工厂仪表与 Envelope 的鸽子投递、邮箱系统、地址标记及回款机制协同工作。

视频演示
✨ 特性
完整的包裹互操作性
- Create 原生支持携带 Envelope 地址的包裹——由 Create 重新打包机打包的包裹可以通过鸽子发送
- 从邮箱(GUI、漏斗、漏斗槽、机械臂)中提取 Envelope 包裹时,会自动将其转换为 Create 包裹
- 地址双向同步:给 Create 包裹贴上地址标签后,它会与 Envelope 邮件一起被路由处理
打包机 → 邮箱流水线
打包机不会拆解已标记地址的包裹——而是直接将其放入正对方向的邮箱的 SLOT_MAIL(邮件槽),准备供鸽子取件。这适用于两种情况:
- 到达打包机的 预地址包裹 会被拦截并完整路由至邮箱
- 刚打包好的包裹(物品进 → 箱子出)会在上方的蛙口(frogport)抓取之前被转移到邮箱
这意味着你的 Create 打包设置可以直接接入 Envelope 的邮件投递,无需任何中间容器、漏斗或红石装置。
鸽子投递与丢失邮件退回
一旦包裹落入 SLOT_MAIL,鸽子会将其拾起并投递到收件人的邮箱。如果投递失败(地址错误或无收件人),包裹将作为丢失邮件退回至 发件人邮箱的收件箱。之后,漏斗或机械臂可以从中提取并将其送回你的 Create 分拣系统。
完整循环:打包机 → 邮箱 → 鸽子 → 收件人 / 丢失邮件退回 → 漏斗 → 返回打包机
工厂仪表补货
工厂仪表可以使用虚拟物品处理器插槽 查看 SLOT_MAIL 中包裹内的内容。当它检测到承诺的物品确实存在于箱子内时,承诺即告完成。这意味着你的 Create 自动补货系统可以完美配合通过邮件发送的包裹——无需特殊配置。
机械臂支持
手持机械臂右键点击邮箱即可将其链接。机械臂可以:
- 存入物品 至 SLOT_MAIL(准备供鸽子发送)
- 提取物品 来自收件箱(收到的邮件、退回的包裹)
链接时不会打开 GUI,机械臂直接连接,就像它与 basin(水盆)、depot(仓库)和 packager(打包机)交互时一样。
回款标签兼容性
回款标签(Payback tags)可通过两种方式作用于 Create 包裹:
- 合成台:在合成网格中将回款标签与 Create 包裹结合
- Shift+右键:手持回款标签右键点击 Create 包裹
回款包裹(邮件服务作为付款发送的那些)永远不会转换为 Create 格式——它们保持原有身份,以便鸽子系统正确识别。
依赖项
- Create - 显而易见
- Envelope - 本模组扩展的邮件系统
Create: Envelope Compat
BRIDGING THE GAP BETWEEN CREATE AND ENVELOPE
? What Is This?
Create: Envelope Compat makes Create packages and Envelope packages the same thing. No more choosing between automation-friendly Create crates and Envelope's mail system - you get both, seamlessly.
Build fully automated mailrooms where Create packagers, mechanical arms, funnels, and factory gauges all work hand-in-hand with Envelope's pigeon delivery, mailbox system, addressing, and payback mechanics.

Video Demonstrations
✨ Features
Full Package Interop
- Create packages carry Envelope addresses natively - a package packed by a Create repackager can be sent via pigeon
- Envelope packages are automatically converted to Create packages when extracted from mailboxes (GUI, funnel, hopper, mechanical arm)
- Addresses sync both ways: slap an Address Tag on a Create package and it gets routed right alongside Envelope mail
Packager → Mailbox Pipeline
The packager never unpacks addressed packages - instead it places them directly into the facing mailbox's SLOT_MAIL, ready for pigeon pickup. This works two ways:
- Pre-addressed packages arriving at the packager are intercepted and routed to the mailbox whole
- Freshly packed packages (items in → crate out) are transferred to the mailbox before the frogport above can snatch them
This means your Create packing setup feeds directly into Envelope's mail delivery without any intermediate chests, hoppers, or redstone contraptions.
Pigeon Delivery & Lost Mail Return
Once a package lands in SLOT_MAIL, a pigeon picks it up and delivers it to the recipient's mailbox. If delivery fails (wrong address, no recipient), the package is returned to the sender's mailbox inbox as lost mail. From there, a funnel or mechanical arm can extract it and feed it back into your Create sorting system.
The complete loop: Packager → Mailbox → Pigeon → Recipient / Lost Mail Return → Funnel → Back to Packager
Factory Gauge Restock
The factory gauge can see inside the package sitting in SLOT_MAIL using virtual item handler slots. When it detects that the gauge's promised item is inside the crate, the promise is completed. This means your Create restock system works perfectly with mail-sent packages - no special configuration needed.
Mechanical Arm Support
Right-click a mailbox while holding a mechanical arm to link it. The arm can:
- Deposit items into SLOT_MAIL (ready for pigeon dispatch)
- Extract items from the inbox (received mail, returned packages)
No GUI opens when linking the arm connects directly, just like it does with basins, depots, and packagers.
Payback Tag Compatibility
Payback tags work on Create packages through two paths:
- Crafting table: Combine a payback tag with a Create package in the crafting grid
- Shift-click: Right-click a Create package with a payback tag in hand
Payback Packages (the ones the mail service sends as payment) are never converted to Create format - they keep their identity so the pigeon system recognizes them correctly.
Requirements
- Create - because obviously
- Envelope - the mail system this mod extends
评论 0
登录后参与评分
还没有评论,来抢沙发吧