一些公告
本模组已无限期归档,因为我有其他优先事项和项目。在我重新开始开发之前,该模组将不会收到任何更新。虽然仍计划了一些很棒的内容,但如前所述,目前并非我的优先级。
!! 注意:我们唯一针对 1.20.1 的 DnD 版本存在漏洞,在使用命令 /*give <name> ...* 时会崩溃,因此我认为在修复此问题之前,我将暂停对 1.20.1 的开发。请记住,他们可能不会修复它,届时我也不知道该怎么办。让我们希望他们能解决它。
这是为我自己的整合包制作的模组,我会随时添加我觉得有用且想到的内容。
模组添加了以下内容:
对角红石梁
-
通过本模组,你可以让对角梁(来自 Create: Design and Decor)无线发射红石信号。操作方法如下:使用绑定器右键点击对角梁;然后放置发射机方块(这部分可能会改变,未来可能会改为使用 Create Link),并使用绑定器右键点击发射机。完成!现在当你给发射机供电时,梁就会发射红石信号。
-
右键点击发射机会打开配置界面,你可以在其中设置输出功率等级(也以红色显示)。当使用任何红石电源给该方块供电时,梁将发出所选功率等级的红石信号。
-
此外,绑定器也有配置功能(右键点击空气即可打开):你可以设置是否允许覆盖之前的发射机链接,以及在使用后保持或重置选定的梁位置。我还添加了一个叠加层,用于显示选定梁的坐标。
-
螺丝刀:如果你右键点击已链接的发射机,它会显示所链接梁的坐标。如果按住 Shift 键并右键点击,则会删除链接。
-
目前,如果将一个梁链接到多个发射机,你需要将所有发射机都通电,当其中一个发射机断电时,所链接的梁也会关闭。
完全透明玻璃
智能观察者
智能观察者是 Create 模组中观察者方块的更智能版本。放置时需要选择过滤器,否则无法工作。
通过用你想检测的方块右键点击该方块来选择过滤器。
如图所示,它有两种主要模式:
应急灯
类似应急灯的灯具。使用螺丝刀右键点击可更改位置(墙壁为顶部、中部、底部;天花板或地板为中部/侧面)。使用扳手右键点击可更改类型(天花板、墙壁或地板)。由一个火把和两个铁板合成,三种类型均可在切石机中使用。
建议使用 EMI/JEI 查看合成配方。
如有任何问题或错误报告,请加入 Discord 服务器。此外,如果你有建议添加的方块,请进入服务器并告诉我,也许我会在下次更新中添加它们。
运行本模组需要安装 Create: Design 'N' Decor。下载适用于 1.20.1 的版本请点击这里。
计划添加:
- 可能添加 - 不跳跃标志牌(电气用途)
- 已完成 - Create: Deco 笼形灯具有更低(或可配置)的光照等级。参见 Create: DDCL.
- copycat 红石链接
- 脉冲计数器,计算红石脉冲的数量等(
部分实现,如果有兴趣并希望拥有特定功能,请在 Discord 上告知我)。
- 更新的智能观察者:检测状态、多种工作模式等
- ponder(引导教程)
模组使用 MCreator 创建。
Some announcements
This mod is indefinitely archived, since i have other priorities and projects. The mod won't receive any updates until i restart working on it. Pretty cool stuff is still planned but, as said, not my priority at the moment
!! Attention: our one and only DnD release for 1.20.1 is bugged and it crashes with command /give <name> ... so i think i'm suspending 1.20.1 development until they fix it. Keep in mind that they might not fix it and idk what i'm doing then. Let's hope they solve it.
This is for my modpack, i add something when it comes to mind and it's useful.
The mod adds:
Diagonal Redstone Girder
-
With this mod you can make the diagonal girder (from Create: Design and Decor) emit redstone wirelessly. To do so, right click with the bounder on the diagonal girder; then place the transmitter block (maybe this will change, in favor of using the Create link) and right click with the bounder. And done! Now when you power the transmitter, the girder will emitt redstone.
-
By right clicking the transmitter, you open the config where you can set the output power level (also displayed in red). When you power the block with any redstone power, the girder will emit a redstone signal with the selected power.
-
Also, the bounder has a config (right click on air): you can set it to allow overwriting the previous transmitter linking and also to maintain or reset the selected girder position after you use it. I also added an overlay that shows the selected girder coordinates.
-
Screwdriver: if you right click on a linked transmitter it shows the linked girder coords. If you shift-right click you delete the linking
-
For now, if you link more than one transmitter to a girder, you can power all transmitters up and when you unpower one of the transmitters the linked girder turns off.
Fully Trasparent Glass
- An invisible glass block that is fully trasparent, crafted with one glass.
Smarter Observer
The smarter observer is a more intelligent version of the Create mod one. You need to select a filter when placed, otherwise it won't work.
Select it by right clicking the block with the block you want to detect.
As shown in the gallery, it has 2 main modes:
-
Basic mode: It outputs a signal for 1 tick when it detects the selected block.
-
Advanced mode, with a "Minecraft Mode" switch:
- Minecraft Mode OFF: It will detect the block when placed and output a signal for the selected amount of time.
- Minecraft Mode ON: similar, but mimics the behavior of the vanilla observer. It will detect the block when placed or removed, and output a signal for the selected amount of time both times.
-
You can rotate and break it with the wrench. The observer works with pistons to.
Emergency Lamp
Lamp similar to emergency ones. Right click with screwdriver to change position (top, center, bottom for walls and center/side for ceiling or floor. Right click with the wrench to change type (ceiling, wall or floor). Crafted with one torch and 2 iron plates, the 3 types are usable in stonecutter.
I suggest using EMI/JEI for the craftings.
For any question or bug reports, join the Discord server. Also, if you have suggestions for blocks to add, enter and tell me, maybe i'll add them in the next update.
For this mod, Create: Design 'N' Decor is required. Download for 1.20.1 here.
Planned:
- MAYBE - No jumping sign (electrical purpose)
- DONE - Create: Deco cage lamps with less (or configurable) light level. See Create: DDCL.
- copycat redstone link
- Pulse counter, count the number of redstone pulses and more (
kinda, let me know on discord if you are interested and if you want specific functions).
- renewed smart observer: detect states, multiple functioning modes and more
- ponders
Mod created with MCreator.
评论 0
登录后参与评分
还没有评论,来抢沙发吧