自定义亮度 – 全亮与伽马控制
在游戏中按
B键更改亮度。 每次按下会切换到下一个等级(默认为 0% → 100% → 200% → 500% → 1000%),当前等级显示在快捷栏上方。可在 选项 → 控制 → 按键绑定 → Customizable Brightness 中更改按键。
受够了那些只有“开启”或“关闭”的全亮模组?Customizable Brightness 允许你通过单个按键循环切换任意数量的亮度等级,从漆黑一片(0%)到超亮的洞穴视野(1000%+)。
✨ 功能特性
- 一键多档: 按
B键在预设的亮度档位间切换 - 自定义档位: 默认档位为 0%、100%、200%、500% 和 1000%,完全可自定义
- 记忆会话状态: 重新打开游戏时,会保留你上次离开的亮度等级
- 即时反馈: 每次按下按键,快捷栏上方都会显示当前的百分比数值
- 易于发现: 角落处的小提示会在你首次按下按键前显示你的按键设置
- 超越原版限制: 远超 Minecraft 原版 100% 的亮度上限
- 完全黑暗模式: 支持 0% 亮度,适用于氛围感或恐怖玩法
- 游戏内配置: 通过 Mod Menu + Cloth Config (1.16.5 及更高版本)
- 仅客户端: 服务器端无需安装任何内容
- 广泛的版本支持: 支持 44 个 Minecraft 版本,从 1.14.4 到 26.3
? 适用场景
- 无需放置火把即可进行洞穴探索
- 在深暗区域挖矿,保持完全可视度
- 探索远古城市
- 无需药水即可在夜间建造和挖矿
- 恐怖地图或注重氛围的游戏流程(使用 0% 亮度)
? 安装步骤
- 安装 Fabric Loader 和 Fabric API
- 下载对应你 Minecraft 版本的文件,并将其放入
mods文件夹 - 启动游戏并按
B键
可选(游戏内配置,1.16.5+): Mod Menu 和 Cloth Config
? 支持版本
| Minecraft | Java |
|---|---|
| 1.14.4 – 1.16.5 | 8 |
| 1.17 – 1.17.1 | 16 |
| 1.18 – 1.20.4 | 17 |
| 1.20.5 – 1.21.11 | 21 |
| 26.1 – 26.3 | 25 |
⚙️ 配置说明
- 游戏中: Mods → Customizable Brightness → 配置按钮(需要 Mod Menu + Cloth Config)
- 配置文件:
config/customizable_brightness.properties,例如brightness_stops=0.0,1.0,2.0,5.0,10.0(1.0 = 100%) - 按键绑定: 选项 → 控制 → 按键绑定
⚠️ 已知限制
- 光影包(Iris / OptiFine 光影): 大多数光影包会自行处理光照并忽略超过 100% 的亮度设置。启用光影时,0% 到 100% 有效,但更高等级看起来与 100% 相同。不启用光影时,所有等级均有效,包括搭配 Sodium 使用时。
B键与原版的亮度滑块共享同一个层级。移动滑块会设定亮度(0–100%)并被记住;之后按下B键会从该值之上开始切换到下一个等级。
❓ 常见问题
为什么不直接用其他全亮模组? 大多数其他模组只是简单的开关切换。本模组提供任意数量的档位,并在会话之间保持记忆。
这在服务器上允许吗? 它仅作用于客户端,但过高的亮度可能带来优势,因此请查阅你所在服务器的规则。
我可以设置自定义档位吗? 可以,可以在配置文件或游戏内配置中设置 0% 到 10000% 之间的任意值。
? 链接
由 SimplyAG 制作 · MIT 许可证 · 仅客户端 · Fabric 1.14.4 – 26.3
Customizable Brightness – Fullbright & Gamma Control
Press
Bin game to change brightness. Each press steps to the next level (0% → 100% → 200% → 500% → 1000% by default), and the current level shows above your hotbar. Change the key under Options → Controls → Key Binds → Customizable Brightness.
Tired of fullbright mods that are only "on" or "off"? Customizable Brightness lets you cycle through as many brightness levels as you want with a single key, from pitch black (0%) to ultra-bright cave vision (1000%+).
✨ Features
- One key, many levels: press
Bto step through your brightness stops - Your own stops: defaults are 0%, 100%, 200%, 500% and 1000%, fully customizable
- Remembered between sessions: the game reopens at the level you left it on
- Instant feedback: the current percentage appears above your hotbar on every press
- Easy to discover: a small hint in the corner shows your key until you first press it
- Beyond vanilla limits: goes far past Minecraft's 100% brightness cap
- Complete darkness mode: 0% for atmospheric or horror gameplay
- In-game config: via Mod Menu + Cloth Config (1.16.5 and newer)
- Client-side only: nothing to install on servers
- Huge version support: 44 Minecraft versions, from 1.14.4 to 26.3
? Perfect For
- Cave exploration without placing torches
- Mining in deep dark areas with full visibility
- Ancient city exploration
- Night building and mining without potions
- Horror maps and atmospheric playthroughs at 0%
? Installation
- Install Fabric Loader and Fabric API
- Download the file for your Minecraft version and put it in your
modsfolder - Launch the game and press
B
Optional (in-game config, 1.16.5+): Mod Menu and Cloth Config
? Supported Versions
| Minecraft | Java |
|---|---|
| 1.14.4 – 1.16.5 | 8 |
| 1.17 – 1.17.1 | 16 |
| 1.18 – 1.20.4 | 17 |
| 1.20.5 – 1.21.11 | 21 |
| 26.1 – 26.3 | 25 |
⚙️ Configuration
- In game: Mods → Customizable Brightness → config button (needs Mod Menu + Cloth Config)
- File:
config/customizable_brightness.properties, for examplebrightness_stops=0.0,1.0,2.0,5.0,10.0(1.0 = 100%) - Keybind: Options → Controls → Key Binds
⚠️ Known Limitations
- Shader packs (Iris / OptiFine shaders): most shader packs do their own lighting and ignore brightness above 100%. With shaders on, 0% to 100% works, but higher levels look the same as 100%. Without shaders, every level works, including with Sodium.
- The
Bkey and the vanilla Brightness slider share one level. Moving the slider sets brightness (0–100%) and is remembered; pressingBafterwards steps to the next level above it.
❓ FAQ
Why not just use another fullbright mod? Most are simple on/off toggles. This gives you as many levels as you want, remembered between sessions.
Is this allowed on servers? It's client-side only, but extreme brightness can be an advantage, so check your server's rules.
Can I set custom levels? Yes, any value from 0% to 10000%, in the config file or the in-game config.
? Links
Made by SimplyAG · MIT License · Client-side · Fabric 1.14.4 – 26.3
下载 Customizable Brightness – 全亮度与伽马控制
下载 Customizable Brightness – 全亮度与伽马控制
下载 Customizable Brightness – 全亮度与伽马控制
下载 Customizable Brightness – 全亮度与伽马控制
下载 Customizable Brightness – 全亮度与伽马控制
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Customizable Brightness – 全亮度与伽马控制
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Customizable Brightness – 全亮度与伽马控制
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Customizable Brightness – 全亮度与伽马控制
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Customizable Brightness – 全亮度与伽马控制
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Customizable Brightness – 全亮度与伽马控制
Customizable Brightness 1.1.1,适用于 Minecraft 26.1 至 26.3。按 B 键循环调整亮度(默认范围为 0% 到 1000%+)。
- 新增:超过 100% 的亮度现在支持光影包。使用 Iris 时,每增加一级超过 100% 的亮度,都会提升光影包自身的照明效果,最高可达 1000% 满值。具体视觉效果取决于光影包;已测试 Complementary Reimagined 和 Complementary Unbound。
- 修复:使用 Sodium 时,重启后超过 100% 的亮度会恢复为 50%。
- 其他 Minecraft 版本仍保持在 1.1.0。
自定义亮度 1.1.0。按 B 键循环调整亮度(默认范围为 0% 到 1000%+)。
- 新增:支持 Minecraft 26.3。
- 修复:重启后亮度可能恢复错误值(例如,在使用原版亮度滑块后按下 B 键时)。现在模组的配置文件成为唯一的权威来源,B 键和滑块都能正确持久化设置。
- 修复:当亮度超过 100% 时,每次保存选项都会记录“Error saving option Brightness ... outside of range”错误。
- 修复:按键绑定类别在控制界面中显示为原始翻译键。
- 新增:角落出现类似教程风格的提示(类似于“使用 W A S D 移动”的提示),显示用于循环调整亮度的按键。在你按下该键之前会一直显示;如果你从未按下过,下次加入世界时会再次出现;一旦你按下过,将不再重复显示。
- 模组现在拥有图标、链接到其源码和问题追踪器,并包含许可证文件。
- 下载量减少:一个文件涵盖所有测试过的 Minecraft 版本(详见每个文件的版本列表)。
- 不再支持 Minecraft 1.14.3:没有适用于 1.14.3 的 Fabric API 版本包含模组所需的内容,因此无法通过该版本的测试。1.14.3 的旧版文件仍然可用。1.14.4 及更高版本不受影响。
关于这个资源的讨论、问题反馈与使用心得
还没有讨论,来发第一帖吧
你是这个资源的作者?登录后可认领此资源。
相似资源
模组
显示你正在注视的方块的信息。(适用于 Minecraft 1.16+ 的 Hwyla/Waila 分支)
模组
使用 JavaScript 编辑配方、添加自定义物品、编写世界事件!
模组
查看物品与配方
模组
在游戏画面角落显示附近世界地形、玩家、生物和实体的地图。可创建路径点,帮助你找到标记过的位置。
模组
AE2:一款流行的自动化与存储模组
模组
那是什么?一个 Waila/Hwyla 的分支。
评论 0
登录后参与评分
还没有评论,来抢沙发吧