一个大型基地、拥挤的村庄或密集的怪物潮都足以让你的帧率(FPS)大幅下降。通常的解决办法是将整个游戏的渲染距离调低,或者每次都要停下来手动调整滑块。
Dynamic Render Distance 可以自动为你完成这一操作。当帧率低于你的目标值时,它会缩短游戏实际渲染的距离;当帧率恢复时,它又会将距离恢复到你自己设定的数值。无需重新加载,也不会出现画面闪烁。
功能特性
- 保持目标帧率: 你可以选择希望维持的帧率(默认为 60)。如果垂直同步(VSync)或最大帧率限制更低,则以该上限为准。
- 根据下降幅度响应: 渲染距离的缩减幅度与帧率低于目标值的程度成正比,大约每低 7% 减少 1 个区块,最多一次性减少 8 个区块。它以每次 1 个区块的方式平滑过渡,确保过程流畅。
- 自动恢复: 当帧率回升至目标值的 97% 时,渲染距离会自动恢复。
- 不修改你的设置: 你的“渲染距离”滑块和
options.txt文件永远不会被更改。你的设定是上限,模组仅在此上限之下工作。 - 无需重新加载: 无论是否安装 Sodium,渲染距离的变化都不会导致区块重建。
- 空闲时暂停: 当窗口最小化、失去焦点或处于 AFK(挂机)限制状态时,模组会暂停运行。
兼容支持
- Sodium 和 Embeddium: 可选。未安装这些模组时,本模组的工作方式相同。
- Bobby: 此限制同样适用于 Bobby 管理的区块,在服务器上也生效。
- Distant Horizons: 远处的 LOD(细节层次)模型会通过 Distant Horizons API 遵循相同的限制。其自身的设置不会被更改。
- 服务器与 ServerCore: 外部引起的距离变化不再导致你的区块重新加载。在单人游戏中,ServerCore 不再覆盖你的滑块设置。在专用服务器上,ServerCore 保留其所有功能。
设置选项
路径:选项 > 视频设置。在 Fabric 环境下,还可在带有 Sodium 时的 Dynamic RD 标签页以及 Mod Menu 中找到。
| 设置项 | 默认值 | 范围 | 说明 |
|---|---|---|---|
| Enabled (启用) | ON (开启) | 开启或关闭模组 | |
| Target FPS (目标帧率) | 60 | 30 到 240 | 你希望维持的目标帧率 |
| Tolerance (容差) | 15% | 5% 到 30% | 平均持续 5 秒后,帧率低于目标值多少比例时才降低渲染距离 |
| Min Distance (最小距离) | 6 | 2 到 32 | 渲染距离绝不会低于此值 |
| Max Drop (最大降幅) | 8 | 1 到 8 | 一次最多可移除的区块数 |
| DRD Messages (显示消息) | ON (开启) | 在动作栏中显示每次距离变化的通知 |
高级配置位于 config/dynamic-render-distance.json 文件中:checkIntervalTicks(检查间隔刻度,默认 100)、cooldownTicks(冷却时间刻度,默认 200)和 increaseStep(增加步长,默认 1)。
兼容性
- Fabric: Minecraft 1.18.2 至 26.3。需要 Fabric Loader 0.16.14 或更高版本。
- Forge: Minecraft 1.18.2 至 26.3。
- NeoForge: Minecraft 1.20.2 至 26.3。在 1.20.1 版本中,请使用 Forge 版文件:它同样可在 NeoForge 上运行。
- 仅在客户端安装即可。服务器端不需要此模组。
本模组已被整合包 Legends Reborn: Medieval 使用。
One big base, a crowded village or a storm of mobs is enough to drag your FPS down. The usual fix is to lower your render distance for the whole game, or to stop and move the slider every time.
Dynamic Render Distance does it for you. When FPS drop below your target, it shortens what the game renders. When FPS come back, it brings the distance back up to your own setting. Nothing reloads, nothing flashes.
What it does
- Keeps your target FPS: you choose the FPS you want (60 by default). If VSync or your Max Framerate is lower, that cap is used instead.
- Reacts to how bad it is: the drop follows how far FPS are below the target, about 1 chunk per 7%, up to 8 chunks at once. It slides one chunk at a time so it stays smooth.
- Comes back on its own: the distance goes up again once FPS reach 97% of your target.
- Leaves your setting alone: your Render Distance slider and options.txt are never changed. Your setting is the ceiling, and the mod only works below it.
- Reloads nothing: a distance change rebuilds no chunks, with or without Sodium.
- Waits when you are away: it pauses while the window is minimized, unfocused or AFK-limited.
Works with
- Sodium and Embeddium: optional. Without them the mod works the same way.
- Bobby: the limit also applies to Bobby's chunks, on servers too.
- Distant Horizons: far LODs follow the same limit, through the Distant Horizons API. Its own settings are not changed.
- Servers and ServerCore: a distance changed from outside no longer reloads your chunks. In singleplayer, ServerCore no longer overwrites your slider. On a dedicated server, ServerCore keeps all its features.
Settings
In Options > Video Settings. On Fabric, also in a Dynamic RD tab with Sodium, and in Mod Menu.
| Setting | Default | Range | What it does |
|---|---|---|---|
| Enabled | ON | Turns the mod on or off | |
| Target FPS | 60 | 30 to 240 | The FPS you want to keep |
| Tolerance | 15% | 5 to 30% | How far below the target FPS may drop (average over 5 s) before the distance is lowered |
| Min Distance | 6 | 2 to 32 | Never render less than this |
| Max Drop | 8 | 1 to 8 | Most chunks removed at once |
| DRD Messages | ON | Shows each change in the action bar |
Advanced values are in config/dynamic-render-distance.json: checkIntervalTicks (100), cooldownTicks (200) and increaseStep (1).
Compatibility
- Fabric: Minecraft 1.18.2 to 26.3. Requires Fabric Loader 0.16.14 or newer.
- Forge: Minecraft 1.18.2 to 26.3.
- NeoForge: Minecraft 1.20.2 to 26.3. On 1.20.1, use the Forge file: it runs on NeoForge too.
- Install it on the client only. A server does not need it.
Used in the Legends Reborn: Medieval modpack.
下载 [DRD] Dynamic Render Distance
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 [DRD] Dynamic Render Distance
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 [DRD] Dynamic Render Distance
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 [DRD] Dynamic Render Distance
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 [DRD] Dynamic Render Distance
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 [DRD] Dynamic Render Distance
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 [DRD] Dynamic Render Distance
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 [DRD] Dynamic Render Distance
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 [DRD] Dynamic Render Distance
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 [DRD] Dynamic Render Distance
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
v1.0.4:
- 卡顿过后,渲染距离恢复得更快。如果某个渲染距离被证明过于沉重,现在会保持限制 15 秒,而不是之前的 5 分钟。
- 当你的 FPS 达到目标 FPS 的两倍时,该限制会立即解除。
v1.0.3:
- 修复了在使用 Sodium 或 Embeddium 时游戏启动崩溃的问题。
- 支持 Distant Horizons:通过 Distant Horizons API,远处的 LOD(细节层次)遵循相同的限制。它自身的设置不会被更改,也无需重新加载。
- 来自外部(服务器、ServerCore 或其他模组)的距离变更不再触发区块重载,无论是否使用 Sodium。
- 在单人游戏中使用 ServerCore:它不再覆盖你的渲染距离滑块或 options.txt 文件。在专用服务器上,ServerCore 会保留其所有功能。
v1.0.2:
- 不再需要 Sodium。在没有 Sodium 的情况下,DRD 现在会在不重新加载区块的情况下改变渲染距离:无闪烁。
- 不会更改您自己的渲染距离。DRD 仅限制绘制的距离,然后将其恢复至您的设置值。
- 读取您的实际 FPS 上限:VSync(屏幕刷新率)、帧率限制、最小化或未聚焦窗口。
- 新增目标 FPS 和容差设置。距离下降幅度取决于当前 FPS 低于目标值的程度,并每次滑动一个区块;距离也会每次恢复一个区块。
- 当游戏本身限制 FPS 时暂停(最小化、未聚焦、加载界面)。
- 设置位于视频设置中(如果有 Sodium:在其独立的设置页面)。Mod Menu 打开相同的页面。
- 现已支持 Minecraft 26.1 至 26.3。
v1.0.1:
- 修复了在打开配置界面时(适用于 1.21.6+)出现的“每帧只能模糊一次”导致的崩溃问题
关于这个资源的讨论、问题反馈与使用心得
还没有讨论,来发第一帖吧
你是这个资源的作者?登录后可认领此资源。
评论 0
登录后参与评分
还没有评论,来抢沙发吧