当方块上方有水时,某些方块会被侵蚀。
在流动的水下,石头会变成砾石,泥土会变成沙子,未染色的硬化粘土会变成红沙。
在静止的水下,沙子会变成粘土。
此外,圆石和石砖在与水相邻时会生长苔藓。
从 2.2 版本开始,雨水会使硬化粘土变软,而阳光会将软粘土烘烤成硬化粘土。
该模组最初的目的是添加一种可再生的沙子和砾石来源。此后,它通过强大的配置选项进行了扩展。
注意:由于该模组的编程方式,在侵蚀被触发之前不会发生任何侵蚀。如果没有玩家靠近,侵蚀将永远不会触发。一旦侵蚀被触发,它将传播到相邻的方块。
2.2 新增:配置已扩展,支持天气、光照和多方块条件。
配置
本模组可以配置为将任意方块侵蚀为任意其他方块。
要向本模组添加新的侵蚀类型,必须将其添加到主部分的注册列表中。您可以随意命名,但名称必须与即将创建的部分匹配。
要创建一个新部分,最好复制并粘贴一个现有部分并进行编辑。将名称更改为您添加到注册列表中的名称。每个部分都有六个字段。
- condition(条件):触发方块侵蚀的条件。这些必须在 erosion_conditions.cfg 文件中定义。
- fromBlock(源方块):我们要从中侵蚀的方块。这必须是一个有效的资源位置(resource location)。
- fromMeta:可接受的元数据值的逗号分隔列表。如果在其前面加上感叹号,则会对这些值进行黑名单处理。设置为 "any" 或 "-1" 表示任意元数据值。
- intoBlock(目标方块):我们要侵蚀成的方块。同样,这必须是一个有效的资源位置。
- intoMeta:我们要侵蚀成的方块的元数据。必须在 0 到 15 之间。
- time:侵蚀该方块需要多少游戏刻。
定义自定义侵蚀条件的工作方式完全相同,但使用以下三个字段:
- conditionBlock:导致侵蚀的方块。这通常是液体,但也可以是任意方块。
- conditionMeta:可接受的元数据值的逗号分隔列表。使用与上述 fromMeta 字段相同的语法。
- checkPositions:将用于检查条件方块的相对位置列表。如果在这些位置中的任何一个找到条件方块,则会发生侵蚀。
2.2 版本增加了一些新的配置选项。
首先,侵蚀条件现在可以依赖于天气和光照。
requireLight 接受一个运算符(< 或 >)和一个数字。例如,>12 表示要求光照等级大于 12。也可以仅设置为一个数字以要求确切的光照等级。
requireWeather 可以设置为 any(任意)、clear(晴朗)、rain(下雨)、snow(下雪)或 thunder(雷暴)。除 "any" 之外的任何天气都需要天空可见性。如果设置为 thunder,则在侵蚀发生时将会召唤闪电。
最后,您现在可以使用 checksRequired 选项来要求一定数量的位置符合条件(以前只需要其中一个位置匹配即可)。
在位置列表中,现在可以使用第四个参数来要求不同类型的方块。可以使用第五个参数来指定所需方块的元数据。
Certain blocks will erode when there is water above them.
When under flowing water, stone will become gravel, dirt will become sand, and undyed hardened clay will become red sand.
When under still water, sand will become clay.
Also, Cobblestone and Stone Bricks will grow moss when adjacent to water.
As of 2.2, rain will turn hardened clay soft, and the sun will bake soft clay into hardened clay.
The original purpose of this mod was to add a renewable source of sand and gravel. It has since been expanded with powerful configuration options.
Note: because of the way this mod is programmed, no erosion will occur until the erosion is triggered. Erosion will never trigger if there are no players nearby. Once erosion is triggered, it will spread to adjacent blocks.
New in 2.2: Configuration expanded with weather, light, and multiple-block requirements.
Configuration
This mod can be configured to erode any block into any other block.
To add a new erosion type to this mod, it must be added to the register list in the main section. It can be named what ever you want, but the name must match the section we're about to create.
To create a new section, it's best to copy and paste one of the existing sections and edit it. Change the name to match the name you added to the register list. Each section has six fields.
- condition is what condition will trigger the block to erode. These must be defined in the erosion_conditions.cfg file.
- fromBlock is the block we are eroding from. This must be a valid resource location.
- fromMeta A comma-separated list of acceptable metadata values. If you prepend it with an exclamation point, it will blacklist these values instead. Set to "any" or "-1" to mean any metadata value.
- intoBlock is the block we are eroding into. Again this must be a valid resource location.
- intoMeta is the metadata of the block we are eroding into. Must be between 0 and 15.
- time is how many game ticks it takes to erode the block.
Defining custom erosion conditions works exactly the same way, but with these 3 fields instead:
- conditionBlock the block that will cause erosion. This is usually a liquid, but it can be any block.
- conditionMeta A comma-separated list of acceptable metadata values. Uses the same syntax as the fromMeta field above.
- checkPositions A list of relative positions that will be checked for the condition block. If the condition block is found in any of these positions, then erosion will occur.
Version 2.2 adds some new configuration options.
First of all, erosion conditions can now depend on the weather and light.
requireLight takes an operator(< or >) and a number. For example, >12 means require a light level greater than 12. It can also be set to just a number to require exactly that light level.
requireWeather can be set to any, clear, rain, snow, or thunder. Any weather other than "any" will require sky access. If set to thunder, then a lightning bolt will be summoned when the erosion occurs.
Finally, you can now require that a certain number of positions match the conditions using the checksRequired option (previously only one of the locations needed to match).
In the position list, a fourth argument can now be used to require a different type of block. A fifth argument can be used to specify the meta of the required block.
下载 Erosion
下载 Erosion
下载 Erosion
下载 Erosion
下载 Erosion
下载 Erosion
下载 Erosion
暂无更新日志
关于这个资源的讨论、问题反馈与使用心得
还没有讨论,来发第一帖吧
你是这个资源的作者?登录后可认领此资源。
相似资源
模组
让你能够在世界中的任何位置定位结构。
模组
TerraFirmaCraft (TFC) 是一个全面转换模组,对生存模式进行了彻底的改造与重新设计。
模组
一堆修复
模组
如果游戏能告知重要的刷新点,会怎样?
模组
一款适用于你选择的加载器的 Minecraft VR 模组!
模组
为盔甲架添加图形用户界面,允许你配置其姿势和其他属性
评论 0
登录后参与评分
还没有评论,来抢沙发吧