关于
Flowing Fluids 是一款模组,为游戏增添了更真实的流体物理效果,使流体主要变为有限量,并为游戏增加了流体管理的元素。拥有数十项设置,涵盖性能、流动行为、 gameplay 元素和视觉效果。
它是多年来各种废弃的水物理模组的精神续作,但为现代 Minecraft 从零开始构建。
以兼容(大多数)模组添加的流体的方式实现,并允许你在任何时候禁用/移除该模组,从而使任何“当前未流动”的流体保持完整以用于原版机制。
服务端还是客户端?
当同时安装在 server(服务端)和 client(客户端)时,此模组效果最佳。然而,如果你不想要视觉功能且不在意直接与流体交互(如使用桶)时出现的轻微客户端不同步,则只需在 server(服务端)安装即可。
在此模组启用时加入原版服务器没有任何危害,但你将获得与在未客户端上安装该模组的服务器相同的轻微客户端不同步现象。
⚠ 该模组目前处于早期开发阶段 ⚠
它尚未功能齐全,在此阶段我无法保证稳定性,因为可能仍存在未知的破坏性错误以及进一步的性能提升空间。
功能
其中许多功能可以通过 /flowing_fluids settings 命令进行调整甚至禁用,如果你感到困惑,请使用 /flowing_fluids help。
流体流动
流体会向外和向下坡面流动并扩散,填充空间并形成水池。
这可以通过多种方式调整,例如流动的距离以及流体在池中自我平整的积极程度。
这意味着你可以建造像渡槽这样的结构。
或者用水淹没区域。
或者用熔岩。
甚至是模组添加的流体。
有限流体
流体是有限的,它们会流动直到耗尽或被阻挡。
这意味着你需要管理你的水源,不能只放置 2 个水源方块就拥有无限的水。
然而,海洋、河流和沼泽将作为无限水源,但它们恢复的速度有限,如果速度足够快,它们仍然可以被排空(通过设置控制)。
这些生物群系还会吸收在海平面处流回的非满水位水,这也可以通过设置进行调整。
只要有可能,流体将被方块置换以避免流失任何流体。
活塞泵
流体可以通过活塞移动,从而自动向上泵送。
Gameplay 元素
有一些新的 gameplay 元素会消耗或用水,以鼓励水资源管理,大多数都是可配置的。
例如,农田在湿润时有机会消耗一个水位等级。
动物在繁殖时有机会需要并消耗附近(8 格内)1 个等级的水。
瓶子在装满时会消耗 2-3 个水位等级。
桶可以拾取 1 - 8 个等级的流体,并且可以用来放置精确的数量。
由于流体被方块放置所置换,你需要找到其他方法来将其排走,例如使用海绵、创建排水口或调整下面提到的蒸发设置。
此外,水还有各种自然蒸发或补充的方式(速率可通过设置自定义):
- 小型(1 级)水坑在地表世界会缓慢蒸发。
- 下界中的任何水都会快速蒸发。
- 任何未满(1-7 级)的水方块在暴露于雨中时会随时间补充。
- 任何未满(1-7 级)的水方块在海洋、河流或沼泽生物群系中、低于海平面且暴露于天光时,会随时间补充。
模组和原版向后兼容性
任何模组添加的流体都应该与该模组一起工作,尽管如果模组流体具有特殊属性,它们可能不会完全支持。
你也可以通过 /flowing_fluids settings ignored_fluids add <fluid_name> 命令黑名单化你不希望具有物理效果的模组流体。
此模组也可以随时禁用(/flowing_fluids settings enable_mod on|off)或移除而不会破坏世界,因为任何“满”(8 级)的流体都将保存为原版水源方块。所有“非满”流体(1-7 级)将保存为原版流动方块,一旦在原版的更新中消失。
Create 模组 - (v0.5 Fabric 和 v0.6 Forge 及 NeoForge)
Flowing Fluids 具有特殊的兼容性设置,可与 Create 模组一起使用,以修改水轮和管道的工作行为。
请注意,某些交互仅在“满”液体方块(水源方块)的情况下才能正常工作,因此在设计规划时要考虑到这一点。
Create 模组管道可以有限地移动流体, Hose Pulleys(软管滑轮)也是如此,并且可以通过 /flowing_fluids create_compat pipes infinite_pipe_fluid_source on|off 命令选择将所有流体视为无限源。
Create 模组水轮在流体持续流动的情况下将正常工作。
默认情况下,水轮在海平面的河流生物群系中即使没有流动也会工作。
这种行为可以通过 /flowing_fluids create_compat water_wheel_requirements ... 命令进行修改,选项如下:
flow- 需要持续的流体流动flow_or_river- 需要持续的流体流动,或在靠近海平面的河流生物群系中接触水 (默认)fluid- 需要接触任何流体方块,无论是否有流动full_fluid- 仅需要接触满(8 级)的流体方块,无论是否有流动always- 所有水轮将始终旋转
对于不需要持续流体流动的选项,水轮将始终以相同的方向旋转,以下选项可用于交换此任意方向:
flow_or_river_opposite_spinfluid_opposite_spinfull_fluid_opposite_spinalways_opposite_spin
视觉效果
该模组使用原版正常的流体渲染方式渲染流体,因此可以与光影兼容。
模组允许隐藏流体在存在高度差时通常显示的流动纹理。(默认启用)
/flowing_fluids settings appearance flowing_texture
模组还允许更改“满溢”流体的渲染高度及其对实体的影响范围。
/flowing_fluids settings behaviour fluid_height
如果你偏好这种视觉效果,还可以防止最低液位流体沿边缘流动。
/flowing_fluids settings behaviour flow_over_edges
性能
本模组在设计上力求尽可能高效。然而,当大量流动影响到数百或数千个方块时(例如快速排干海洋),不可避免地会导致服务器端卡顿,其程度与其他任何影响如此多方块的操作相当。
模组提供了多种设置以优化性能,请自行探索并找到适合你的配置。
此外,模组会在世界生成后遍历所有区块,封堵所有暴露的流体,以避免在世界加载后因整个海洋涌入广阔洞穴系统而导致成百上千次流体更新同时发生。这曾是早期模组存在的问题,但现在已相当稳定。此功能可以禁用,但不建议这样做。
更新日志
你可以在这里查看更新日志。
需要帮助或有疑问?
你可以通过我的 Discord(推荐)联系,或在 GitHub 上提交问题。
托管合作伙伴优惠
About
Flowing fluids is a mod adding more realistic fluid physics to the game, making fluids mostly finite, and adding an element of fluid management to the game. With dozens of settings for performance, flowing behaviour, gameplay elements, and visuals
It is a spiritual successor to some of the various other abandoned water physics mods over the years, but built from scratch for modern Minecraft.
Implemented in a way that is compatible with (most) mod added fluids, and that allows you to disable/remove the mod at any time to return to vanilla mechanics with any 'not currently flowing' fluids remaining fully intact for vanilla purposes.
Server side or Client side?
This mod works best when on both server and client side. However, it is only required on the server side, if you don't want the visual features and don't mind some minor client-side de-sync when directly interacting with fluids, such as using buckets.
There is no harm in joining a vanilla server with this mod enabled, however you will get the same minor client-side de-sync as you would when joining a server with the mod without it on the client.
⚠ The mod is currently in early development ⚠
It is not yet feature complete, and I make no promises of stability at this stage, as there may yet be some unknown breaking bugs and further room for performance improvements.
Features
Many of these can be tweaked or even disabled via the /flowing_fluids settings command, use /flowing_fluids help if you are confused.
Flowing Fluids
Fluids will flow and spread outwards and down inclines, filling up spaces and creating pools.
This can be tweaked in various ways, such as how far they flow, and how aggressively the fluid tries to level itself in pools.
This means you can create things like aqueducts.
or flood areas with water.
or lava.
or even modded fluids.
Finite Fluids
Fluids are finite, and will flow until they run out, or are blocked.
This means you will need to manage your water supply, and can't just place 2 water source blocks and have infinite water.
Oceans, Rivers, and Swamps however, will act as infinite water sources, but there is a limit to how fast they will refill, and they can still be drained if fast enough (controlled in settings).
These biomes will also absorb any non-full water that flows back into it at sea level, also adjustable via settings.
Fluids will also be displaced by blocks wherever possible to avoid losing any fluid.
Piston Pumps
Fluids can be moved by pistons to pump them upwards automatically.
Gameplay Elements
There are a few new gameplay elements that will drain or use water, to encourage water management, most are configurable.
Such as farmlands having a chance to drain a water level whenever it hydrates.
Animals having a chance to require and consume 1 level of nearby water (within 8 blocks) when breeding.
Bottles will consume 2-3 water levels when filled.
Buckets are able to pick up 1 - 8 levels of fluid, and can be used to place down precise amounts.
With fluids being displaced by block placement, you will need to find other ways to drain it away, such as using sponges, creating drains, or tweaking the evaporation settings mentioned below.
There are also various ways in which water specifically naturally evaporates or refills (Rates customizable via settings)
- Small (level 1) water puddles will evaporate slowly in the over world.
- Any water will evaporate quickly in the nether.
- Any water blocks that are not full (levels 1-7) will refill over time when exposed to rain.
- Any water blocks that are not full (levels 1-7) will refill over time when in Ocean, River, or Swamp biomes, below sea level, and exposed to skylight.'
Mod and Vanilla backwards compatibility
Any mod added fluids should work with the mod, though if the modded fluid has special properties, they may not be fully supported.
You can also blacklist modded fluids that you don't want to have physics. Via the /flowing_fluids settings ignored_fluids add <fluid_name> command.
This mod can also be disabled (/flowing_fluids settings enable_mod on|off) or removed at any time without breaking the world, as any fluid that is 'full' (8 levels) will be saved as a vanilla source block. And all 'non-full' fluids (1-7 levels) will be saved as a vanilla flowing blocks which will just disappear once updated in vanilla.
The Create Mod - (v0.5 Fabric and v0.6 Forge and NeoForge)
Flowing Fluids has special compatibility settings for use with the Create mod, to modify the behaviour of water wheels and pipes.
Please note some of these interactions only work properly with "full" liquid blocks (source blocks), so factor that in to your design planning.
Create Mod Pipes can move fluids around finitely, as can Hose Pulleys, and can optionally be set to treat all fluids as infinite sources via the /flowing_fluids create_compat pipes infinite_pipe_fluid_source on|off command.
Create Mod Water Wheels will work normally given a constant flow of fluid.
By default, Water Wheels will also work without flow in river biomes at sea level.
This behaviour can be modified via the /flowing_fluids create_compat water_wheel_requirements ... command, with the following options:
flow- Requires a constant flow of fluidflow_or_river- Requires a constant flow of fluid, or to be touching water in a river biome near sea level (Default)fluid- Requires contact with any fluid blocks, regardless of flowfull_fluid- Requires contact with full (8 levels) fluid blocks only, regardless of flowalways- All water wheels will always be spinning
For the options that don't require a constant flow of fluid, the wheels will always spin in the same direction, the following options exists to swap this arbitrary direction:
flow_or_river_opposite_spinfluid_opposite_spinfull_fluid_opposite_spinalways_opposite_spin
Visuals
The mod renders fluids completely normally, using the regular vanilla fluid rendering, this allows it to be compatible with shaders.
The mod allows hiding the flowing texture that normally appears on fluids when there is a height difference. (enabled by default)
/flowing_fluids settings appearance flowing_texture
The mod also allows changing the heights at which 'full' fluids render and affect entities.
/flowing_fluids settings behaviour fluid_height
You can also prevent minimum level fluids from flowing over edges, if you prefer that visual.
/flowing_fluids settings behaviour flow_over_edges
Performance
The mod is designed to be as performant as possible. However, massive amounts of flow affecting hundreds or thousands of blocks, such as quickly draining an ocean, is going to cause some unavoidable server side lag. As much as any other thing affecting this many blocks would.
The mod has various settings to tweak the performance have a look around and see what works for you.
The mod also makes a pass over every chunk after generation and plugs up all exposed fluids so you don't end up with hundreds of fluid ticks happening right after the world loads as entire oceans drain into vast cave systems. This used to be a problem with the early mod but is now quite stable, can be disabled, but I wouldn't recommend it.
Changelog
You can find the changelog here.
Need help or have questions?
You can reach out on my Discord (preferred) or open an issue on GitHub.
Hosting Partner deal
下载 Flowing Fluids
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Flowing Fluids
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Flowing Fluids
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Flowing Fluids
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Flowing Fluids
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Flowing Fluids
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Flowing Fluids
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Flowing Fluids
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Flowing Fluids
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Flowing Fluids
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
- 26.3 版本发布
- 修复了导致 Create 水轮无法正常工作的一个问题
- 26.2 版本
关于这个资源的讨论、问题反馈与使用心得
还没有讨论,来发第一帖吧
你是这个资源的作者?登录后可认领此资源。
相似资源
模组
让你能够在世界中的任何位置定位结构。
模组
TerraFirmaCraft (TFC) 是一个全面转换模组,对生存模式进行了彻底的改造与重新设计。
模组
一堆修复
模组
如果游戏能告知重要的刷新点,会怎样?
模组
一款适用于你选择的加载器的 Minecraft VR 模组!
模组
为盔甲架添加图形用户界面,允许你配置其姿势和其他属性

评论 0
登录后参与评分
还没有评论,来抢沙发吧