语言
Fly Speed Modifier
一个客户端侧 Fabric 模组,允许你按住按键并滚动鼠标滚轮来临时调整当前的移动速度倍率。
功能特性
- 调整原版创造模式飞行速度
- 当安装了 Freecam 且处于激活状态时,调整其移动速度
- 可选地将相同的倍率应用于其他由客户端控制的移动方式
- 按住调整键并滚动鼠标滚轮即可更改倍率
- 支持配置最小值、最大值、默认倍率以及滚轮步进值
- 支持在开始调整时重置倍率(可选)
- 「全范围」模式将可用最大倍率从
20x提升至100x - 使用非线性的鼠标滚轮倍率调整算法
- 默认使用左 Alt 键作为调整键
使用方法
- 进入受支持的移动状态,例如创造模式飞行、Freecam,或在启用 Apply to Other Movement 选项的情况下进入其他受支持的移动模式。
- 按住左 Alt 键。
- 滚动鼠标滚轮以更改倍率。
- 当前数值会以英文显示为
Speed multiplier: 2.00x,或以所选游戏语言对应的翻译文本显示。
配置说明
Full Range(全范围)
- 默认禁用
- 禁用时:可用最大倍率为
20x - 启用时:可用最大倍率为
100x - 更改此选项时,“最高速度”和“默认速度”滑块会立即更新
Minimum Speed(最低速度)
设置允许的最低临时速度倍率。
设置为 0x 时,对于受支持的路径,新施加的移动将被禁用;除非该移动路径被显式缩放,否则现有的惯性、击退或特殊冲量仍可能根据原版行为继续存在。
Maximum Speed(最高速度)
设置在「Full Range」选定范围内的允许最高临时速度倍率。
Default Speed(默认速度)
设置首次调整时使用的倍率,以及在启用 Reset Before Adjustment 时使用的倍率。
其可用范围始终受限于当前的 Minimum Speed 和 Maximum Speed 值。
Reset Before Adjustment(调整前重置)
- 启用:按下调整键会将倍率重置为 Default Speed
- 禁用:按下调整键会保留之前的倍率
Multiplier Step(倍率步进)
控制每个鼠标滚轮单位下倍率变化的速度。
Apply to Other Movement(应用于其他移动)
Apply to Other Movement 选项默认禁用。
启用后,当前倍率也将应用于受支持的客户端控制移动,包括:
- 行走、疾跑、潜行以及正常水平移动
- 在空中且未飞行时的水平控制
- 游泳以及在岩浆中的移动
- 在水中主动向上和向下移动
- 攀爬梯子、藤蔓和其他可攀爬方块
- 使用标准骑行移动路径的玩家控制的生物坐骑,包括马、猪、炽足兽、骆驼和快乐末影龙
- 船和筏的推进
- 鞘翅在所有三个轴向上的移动,包括俯冲、爬升和自然下降
该选项有意不修改以下内容:
- 玩家正常的跳跃速度
- 马的跳跃力度
- 击退、爆炸或碰撞冲量
- 船的转向速度
- 矿车的移动
- 在粉雪中的向上移动
多人服务器警告
这是一个客户端侧的移动修改。远程服务器可能会纠正、拒绝或标记经过修改的移动行为。使用高倍率可能导致不同步、反作弊违规、断连或被封禁。仅在服务器规则明确允许的情况下在多人服务器上使用。模组作者不对因其使用而导致的处罚负责。
高倍率的鞘翅移动可以在单个游戏刻内让玩家跨越极长的距离。请使用保守的数值,尤其是在使用烟花或接近未加载区块、地形或世界边界时。
支持版本
- Minecraft 26.3
- Fabric Loader 0.19.5+
- Fabric API 0.160.5+
- Java 25
- Mod Menu(可选)
许可证
MIT
Languages
Fly Speed Modifier
A client-side Fabric mod that lets you hold a key and scroll the mouse wheel to temporarily adjust the current movement speed multiplier.
Features
- Adjusts Vanilla Creative Flight speed
- Adjusts Freecam movement speed when Freecam is installed and active
- Optionally applies the same multiplier to other client-controlled movement
- Hold the adjustment key and scroll the mouse wheel to change the multiplier
- Supports configurable minimum, maximum, default multiplier, and scroll step values
- Supports optionally resetting the multiplier when adjustment starts
- Full Range mode raises the available maximum from
20xto100x - Uses non-linear mouse-wheel multiplier adjustment
- Uses Left Alt as the default adjustment key
Usage
- Enter a supported movement state, such as Creative Flight, Freecam, or a supported movement mode with Apply to Other Movement enabled.
- Hold Left Alt.
- Scroll the mouse wheel to change the multiplier.
- The current value is shown as
Speed multiplier: 2.00xin English or the corresponding translated text for the selected game language.
Configuration
Full Range
- Disabled by default
- Disabled: maximum available multiplier is
20x - Enabled: maximum available multiplier is
100x - The Maximum Speed and Default Speed sliders update immediately when this option changes
Minimum Speed
Sets the lowest allowed temporary speed multiplier.
A value of 0x disables newly applied movement for supported paths, although existing inertia, knockback, or special impulses may still continue according to vanilla behavior unless that movement path is explicitly scaled.
Maximum Speed
Sets the highest allowed temporary speed multiplier within the range selected by Full Range.
Default Speed
Sets the multiplier used for the first adjustment and when Reset Before Adjustment is enabled.
Its available range is always limited to the current Minimum Speed and Maximum Speed values.
Reset Before Adjustment
- Enabled: pressing the adjustment key resets the multiplier to Default Speed
- Disabled: pressing the adjustment key keeps the previous multiplier
Multiplier Step
Controls how quickly the multiplier changes for each mouse-wheel unit.
Apply to Other Movement
The Apply to Other Movement option is disabled by default.
When enabled, the current multiplier is also applied to supported client-controlled movement, including:
- Walking, sprinting, sneaking, and normal horizontal movement
- Horizontal control while airborne and not flying
- Swimming and movement in lava
- Active upward and downward movement in water
- Climbing ladders, vines, and other climbable blocks
- Player-controlled living mounts that use the standard riding movement path, including horses, pigs, striders, camels, and happy ghasts
- Boat and raft propulsion
- Elytra movement on all three axes, including diving, climbing, and natural descent
The option does not intentionally modify:
- Normal player jump velocity
- Horse jump strength
- Knockback, explosions, or collision impulses
- Boat turning speed
- Minecart movement
- Powder-snow upward movement
Multiplayer Warning
This is a client-side movement modification. Remote servers may correct, reject, or flag modified movement. Using high multipliers can cause desynchronization, anti-cheat violations, disconnections, or bans. Use it on multiplayer servers only when the server rules explicitly allow it. The mod author is not responsible for penalties caused by its use.
High Elytra multipliers can move the player across very large distances in a single tick. Use conservative values, especially while using fireworks or approaching unloaded chunks, terrain, or the world border.
Supported Versions
- Minecraft 26.3
- Fabric Loader 0.19.5+
- Fabric API 0.160.5+
- Java 25
- Mod Menu (Optional)
License
MIT
下载 Fly Speed Modifier
下载 Fly Speed Modifier
下载 Fly Speed Modifier
下载 Fly Speed Modifier
下载 Fly Speed Modifier
下载 Fly Speed Modifier
下载 Fly Speed Modifier
下载 Fly Speed Modifier
下载 Fly Speed Modifier
下载 Fly Speed Modifier
暂无更新日志
关于这个资源的讨论、问题反馈与使用心得
还没有讨论,来发第一帖吧
你是这个资源的作者?登录后可认领此资源。
相似资源
模组
显示你正在注视的方块的信息。(适用于 Minecraft 1.16+ 的 Hwyla/Waila 分支)
模组
使用 JavaScript 编辑配方、添加自定义物品、编写世界事件!
模组
查看物品与配方
模组
在游戏画面角落显示附近世界地形、玩家、生物和实体的地图。可创建路径点,帮助你找到标记过的位置。
模组
AE2:一款流行的自动化与存储模组
模组
那是什么?一个 Waila/Hwyla 的分支。
评论 0
登录后参与评分
还没有评论,来抢沙发吧