FPS Inspector
找出是哪个模组在吞噬你的帧率! FPS Inspector 会在你游戏时监控运行状况,并用通俗易懂的语言告诉你:哪些模组占用了最多的帧数、它们当时在做什么,以及每次卡顿是由哪个模组引起的。无需火焰图,也无需性能分析知识!
功能特性
概览
- 一目了然地显示平均 FPS、1% 最低 FPS、帧时间和卡顿次数
- 实时帧时间图表,慢帧显示为橙色,卡顿尖峰显示为红色
- 第一页直接展示占用资源最重的五个模组!
模组详情
- 按每个模组占用游戏时间的多少进行排名
- 显示每个模组的每帧耗时(毫秒)
- 粗略估算每个模组导致你损失了多少 FPS
- 显示每个模组忙于处理的事务:世界渲染、区块构建、实体、方块实体、HUD 和菜单、游戏逻辑 tick、网络通信、音效或粒子效果
- 显示有多少时间花在了 Minecraft 本体上,又有多少时间花在等待 GPU 或 FPS 上限上
卡顿尖峰
- 自动记录每一帧耗时过长的情况
- 每个尖峰都会显示耗时多久、发生的时间点,以及当时正在运行的模组!
- 终于知道是什么导致了随机卡顿!
帧时间图表叠加层
- 屏幕任意角落的一个可选小型图表
- 显示当前 FPS、当前帧时间,并指出导致上一次卡顿的模组名称
使用方法
- 按下 F8(可自定义按键)打开 FPS Inspector
- 游玩几秒钟以收集数据
- 查看“概览”、“模组”和“卡顿”页面!
设置
可以通过模组自带的菜单或 Mod Menu 打开设置。你可以调整以下选项:
- 打开 FPS Inspector 的快捷键(支持任意字母、数字或功能键)
- 采样开启或关闭
- 采样精度:轻量(Light)、正常(Normal)或精确(Precise)
- 分析窗口时长:10 秒、30 秒、1 分钟或 2 分钟
- 卡顿阈值:从 20 到 250 毫秒
- 帧时间图表叠加层的开启/关闭,以及其所在屏幕角落
- 一键重置所有已收集的测量数据
工作原理
FPS Inspector 每秒多次检查游戏主线程正在执行的操作,并判断这些代码属于哪个模组。它还理解模组注入到 Minecraft 本体中的代码,因此即使在这种情况下也能准确归因于正确的模组!Fabric API 和捆绑库会被归类到玩家实际认识的模组名下。
需要注意的是:像 Sodium 这样的模组会执行游戏原本就会进行的渲染工作,因此它们总会出现在列表中。这并不意味着它们在拖慢你的速度!
轻量级
采样运行在其独立的后台线程上,并且可以在设置中完全关闭。轻量(Light)采样模式将开销降至最低!
信息
- 仅限客户端! 服务器端无需任何配置,因此适用于任何服务器和单人游戏。
- 设置保存在
config/cookiefpsinspector.json - 加载器: Fabric
- 依赖: Fabric API
- 可选依赖: Mod Menu,用于从模组列表打开设置
- 版本: 1.21.11, 26.1, 26.1.1, 26.1.2, 26.2 和 26.3
FPS Inspector
Find out which mod is eating your FPS! FPS Inspector watches your game while you play and tells you, in plain words, which mods cost you the most frames, what they were doing, and which one caused every lag spike. No flame graphs, no profiler knowledge needed!
Features
Overview
- Average FPS, 1% low FPS, frame time and spike count at a glance
- A live frame time graph, with slow frames in orange and spikes in red
- Your five heaviest mods, right on the first page!
Mods
- Every installed mod ranked by how much of the game's time it uses
- Milliseconds per frame for each mod
- A rough estimate of how many FPS each mod costs you
- What each mod was busy with: world rendering, chunk building, entities, block entities, HUD and menus, game ticking, networking, sound or particles
- Shows how much time goes to Minecraft itself and how much is spent waiting for your GPU or FPS limit
Spikes
- Every frame that took too long is recorded automatically
- Each spike shows how long it took, when it happened, and which mod was running during it!
- Finally know what causes that random stutter!
Frame graph overlay
- An optional small graph in any corner of your screen
- Shows your FPS, the current frame time, and names the mod behind the last spike
How to use
- Press F8 (you can change this key) to open FPS Inspector
- Play for a few seconds so it can collect data
- Check the Overview, Mods and Spikes pages!
Settings
Open the settings from the menu itself, or through Mod Menu. You can change:
- The key that opens FPS Inspector (any letter, number or function key)
- Sampling on or off
- Sample rate: Light, Normal or Precise
- Analysis window: 10 seconds, 30 seconds, 1 minute or 2 minutes
- Spike threshold, from 20 to 250 ms
- Frame graph overlay on or off, and which corner it sits in
- Reset all collected measurements with one click
How it works
FPS Inspector checks what the game's main thread is doing many times per second and works out which mod that code belongs to. It also understands code that mods inject into Minecraft itself, so it can blame the right mod even then! Fabric API and bundled libraries are grouped under the mod players actually recognize.
Good to know: mods like Sodium do rendering work the game would do anyway, so they will always show up. That does not mean they are slowing you down!
Lightweight
Sampling runs on its own background thread and can be turned off completely in the settings. The Light sample rate keeps the overhead as low as possible!
Information
- Client side only! Nothing is needed on the server, so it works on any server and in singleplayer.
- Settings are saved in
config/cookiefpsinspector.json - Loader: Fabric
- Requires: Fabric API
- Optional: Mod Menu, for opening the settings from the mod list
- Versions: 1.21.11, 26.1, 26.1.1, 26.1.2, 26.2 and 26.3
下载 Fps Inspector
下载 Fps Inspector
下载 Fps Inspector
下载 Fps Inspector
下载 Fps Inspector
下载 Fps Inspector
下载 Fps Inspector
下载 Fps Inspector
下载 Fps Inspector
下载 Fps Inspector
修复了由该模组导致的尖刺问题
关于这个资源的讨论、问题反馈与使用心得
还没有讨论,来发第一帖吧
你是这个资源的作者?登录后可认领此资源。
相似资源
模组
一个用于收集生物掉落物的多区块模组。
模组
显示你正在注视的方块的信息。(适用于 Minecraft 1.16+ 的 Hwyla/Waila 分支)
模组
使用 JavaScript 编辑配方、添加自定义物品、编写世界事件!
模组
查看物品与配方
模组
在游戏画面角落显示附近世界地形、玩家、生物和实体的地图。可创建路径点,帮助你找到标记过的位置。
模组
AE2:一款流行的自动化与存储模组
评论 0
登录后参与评分
还没有评论,来抢沙发吧