这是一个添加了液态经验值及相关机器的模组。你需要一个能够运输液体的模组,例如 Buildcraft、Thermal Expansion 或 RedPower 2。
一桶液态经验值相当于 10 点经验值。作为对比,在你达到 15 级之前,每级需要 17 点经验值。
LXP 吸收器
将此方块放置在世界中时,站在其上方会将你的经验值转化为液体,存储在其内部缓冲区中,然后自动释放到任何可以接收的邻近方块(如管道、流体导管和 Buildcraft 储罐)——你不需要使用木管或红石驱动的流体导管。
你可能会注意到还剩余少量经验值未被吸收器吸收——这是因为由于舍入误差,你剩余的经验值略少于 1 点,因为 Minecraft 以一种过于复杂的方式跟踪你的经验值。
使用任何装桶方法(用桶右键点击 BC 储罐,或使用 TE 流体转换器)来获取用于制作其余机器的液态经验值桶。
LXP 收集器
它的工作原理类似于吸收器,但它不是从玩家身上吸取经验值,而是在以自身为中心的 13x13x13 区域(每个方向 6 个方块)内收集经验球。
但这还不足以实现自动经验农场。正如你可能知道的,只有当生物被玩家杀死时才会掉落经验值(以及稀有掉落物和烈焰棒)。更准确地说,如果它们在受到玩家伤害后的 3 秒内死亡。
嗯,LXP Corp 也解决了这个问题。
LXP 催化剂
只需消耗相对少量的液态经验值(可以从任意一侧泵入),此方块就会使附近的生物死亡算作玩家击杀。成本为每催化一只生物消耗 1 点经验值。范围与收集器相同,在此范围内杀死的任何生物都会掉落经验值。如果生物离开了该区域,只有在接下来三秒内死亡时才会掉落经验值。
既然你的怪物农场现在能生产液态经验值,那你打算用它做什么呢?
LXP 印刻器

此方块需要空白徽章作为输入,并使用 LXP 将其充能至特定等级,该等级可以在 GUI 中设置。
空白徽章可以插入 GUI 的左侧,或从顶部导入。充能后的徽章可以从 GUI 的右侧提取,或从方块的底部导出。LXP 可以从任意一侧泵入。
LXP 附魔台

它需要充能徽章(顶部)和书(左侧)。它不需要 LXP。 当充能徽章和书同时存在时,它将使用徽章上存储的等级对书进行附魔,返回一本附魔书(右侧)和一个空白徽章(底部)。 有一个配置选项允许附魔台附魔非书籍物品——默认情况下,它不能这样做。 与原版附魔台不同,它能够在一本书中存储多种附魔。
GUI 左下角的槽位是“模板槽”。 如果此槽为空,则可以将任何附魔存储在书中,就像正常附魔一样。否则,你可以将任何可附魔的物品放在这里,它将用于确定附魔效果。例如,如果使用金剑作为模板并配合 30 级徽章,那么附魔台将如同你在 30 级下附魔金剑一样生成附魔,但会将附魔施加在书上而不是剑上。
模板物品在每次附魔过程中,每使用一级会消耗 4 点耐久度。在上述示例中,金剑将承受 120 点耐久损失并在每次附魔中被消耗,因为它只能承受 33 次使用。钻石剑也将承受 120 点耐久损失,但可以承受 13 次附魔操作,并且由于其较低的附魔能力(与原版一致),会产生价值较低的附魔。
你可以从方块背面插入新的模板物品。 如果使用不可附魔的物品作为模板,附魔台将无法工作。
附魔台周围需要放置书架。自版本 54.0.1 起,书架距离附魔台的水平距离可达 3 个方块,垂直方向最高可达附魔台上方 2 个方块或下方 1 个方块。 此区域的水平截面:

垂直截面:

它不检查障碍物,因此你可以在附魔台和书架之间放置其他机器。
由于附魔台相对于人类的认知能力较低,附魔台需要比手动附魔台更多的书架。 你需要为徽章上的每一级配备两个书架。 要使用高达 30 级的徽章,你需要 60 个书架。
LXP 组合器
这本质上是一个由 LXP 驱动的砧。它能够执行原版砧除重命名之外的所有功能。它不能将附魔应用到“错误”的物品上——它不会将保护术附魔到剑上,也不会将锋利术附魔到泥土块上。
它的等级上限并非 40 级。 它不使用原版机制中已修复物品再次修复成本更高的规则。这适用于双方:已经在砧上修复过的物品可以作为输入且无需额外成本,生成的物品也可以在砧上无额外成本地修复。
输入来自方块的左侧和右侧。输出可以从底部提取。液态经验值可以从任意一侧泵入。
没有可以重命名物品的 LXP 机器。
LXP 分离机
此方块于版本 55.1.0 中添加,是一种将附魔从物品中分离出来的机器。将带有附魔的工具/武器/护甲部件/书放入左侧,在下面放置空书,并提供(相对)少量的 LXP。
为了实现自动化,请从顶部插入物品并从底部提取它们。从任意一侧插入书。这种布局兼容漏斗。
如果输入物品没有附魔或已损坏,它将直接移动到输出槽,且不产生任何费用。
否则,将消耗 15 点经验值(相当于 1.5 桶),并将物品上的第一条附魔移除并转移到一本书上——除非该物品本身已是一本带有单一附魔的书,此时它将直接移至输出槽位且无需任何消耗。
(原版模组由 immibis 制作。原始描述来自 Minecraft 论坛。)
存档通知
本模组已弃用,上传此处仅供存档之用。它最初由 immibis 制作。在获得原作者许可后,已通过 ModrinthArchives 账号上传至 Modrinth。

This is a mod that adds liquid XP, and related machines. You will need a mod capable of transporting liquids, such as Buildcraft, Thermal Expansion or RedPower 2.
One bucket of Liquid XP is worth 10 experience points. For comparison, each level is 17 experience points until you reach level 15.
LXP Absorber
When this block is placed in the world, standing on top of it will cause your XP to be converted to a liquid, stored in its internal buffer, and then emitted to any nearby blocks that can accept it (such as pipes, liquiducts and Buildcraft tanks) automatically - you do not need a wooden pipe or redstone-powered liquiduct.
You may notice that you have a small amount of XP left which the Absorber is unable to absorb - this is because you have slightly less than one point of XP left due to rounding errors, as Minecraft keeps track of your XP in an over-complicated way.
Use any bucket-filling method (right click on a BC tank with a bucket, or use a TE liquid transposer) to get LXP buckets for crafting the rest of the machines.
LXP Collector
It works like the Absorber, but instead of taking XP from players it collects XP orbs in a 13x13x13 area centred on itself (6 blocks in each direction).
This isn't enough to make an automatic XP farm yet, though. As you may be aware, mobs will only drop XP (and rare drops and blaze rods) if they're killed by a player. More accurately, if they die within 3 seconds of being damaged by a player.
Well, LXP Corp's got that covered too.
LXP Catalyzer
For a relatively small cost of Liquid XP, which can be pumped in any side, this block will make nearby mob deaths count as player kills. The cost is one XP point per mob catalyzed. The range is the same as the Collector, and any mob killed within this range will drop XP. If a mob leaves the area it will only drop XP if it dies within the next three seconds.
So now that your mob farm produces Liquid XP, what are you going to do with it?
LXP Imprinter

This block requires blank medallions as input, and charges them with LXP to a certain level, which can be set in the GUI.
Blank medallions can be inserted in the left of the GUI, or piped in from the top. Charged medallions can be extracted from the right of the GUI, or the bottom of the block. LXP can be pumped in to any side.
LXP Enchanter

It requires charged medallions (top) and books (left). It does not require LXP. When a charged medallion and a book are both present, it will enchant the book using the levels stored on the medallion, returning an enchanted book (right) and a blank medallion (bottom). There is a config option to allow the Enchanter to enchant things other than books - by default, it cannot. Unlike the vanilla enchantment table, this is capable of storing multiple enchantments in a book.
The lower-left slot in the GUI is the "template slot." If this is empty, any enchantments can be stored in the book, as with normal enchanting. Otherwise, you can place any enchantable item here and it will be used to determine the enchantments. For example, if a golden sword is used as a template with level 30 medallions, then the Enchanter will create enchantments as if you are enchanting a gold sword at level 30, but will place the enchantments on the book instead of the sword.
The template item takes 4 "uses" of damage for every level used in the enchanting process. In the example above, the gold sword will receive 120 damage points and be consumed with every enchantment, as it only lasts for 33 uses. A diamond sword would also receive 120 damage points, but would last for 13 enchanting operations, and would produce less valuable enchantments due to its lower enchantability (as in vanilla).
You can insert new template items from the back of the block. If a non-enchantable item is used as a template, the Enchanter will not function.
The Enchanter requires bookshelves to be placed around it. As of 54.0.1, the bookshelves can be up to 3 blocks from the Enchanter horizontally, and can be up to 2 blocks above or 1 block below the Enchanter. Horizontal cross-section of this area:

Vertical cross-section:

It does not check for obstructions, so you can place other machinery between the Enchanter and the bookshelves.
Due to the Enchanter's decreased cognitive capacity relative to a human, the Enchanter requires many more bookshelves than a manual enchanting table. You need two bookshelves for every level on the medallion. To use medallions up to level 30, you will need 60 bookshelves.
LXP Combiner
This is essentially an LXP-powered anvil. It is capable of performing all the functions of the vanilla anvil besides renaming. It cannot apply enchantments to the "wrong" items - it won't put Protection on a sword or Sharpness on a dirt block.
It is not capped at level 40. It does not use the vanilla mechanic where already-repaired items cost more to repair again. This works both ways: items that have been already repaired in an anvil can be used as input with no extra cost, and the resulting item can be repaired in an anvil with no extra cost.
Input is from the left and right sides of the block. Output can be extracted from the bottom. Liquid XP can be pumped into any side.
There is no LXP machine that can rename items.
LXP Isolator
This block, added in version 55.1.0, is a machine that separates enchantments from items. Put an enchanted tool/weapon/armour piece/book in the left, put empty books underneath it, and supply a (relatively) small amount of LXP.
For automation, insert items from the top and extract them from the bottom. Insert books from any side. This layout is compatible with hoppers.
If the input item has no enchantments, or is damaged, it will be moved directly to the output slot for no cost.
Otherwise, 15 XP points (1.5 buckets) will be consumed, and the first enchantment will be removed from the item and transferred to a book - unless the item was already a book with one enchantment, in which case it is moved directly to the output slot for no cost.
(Original mod by immibis. Original description from the Minecraft Forums.)
Archival notice
This mod is abandoned and has been uploaded for archival purposes. It was originally created by immibis. It has been uploaded to Modrinth under the ModrinthArchives account with permission from the original author.

下载 Liquid XP
下载 Liquid XP
下载 Liquid XP
下载 Liquid XP
下载 Liquid XP
下载 Liquid XP
下载 Liquid XP
下载 Liquid XP
下载 Liquid XP
下载 Liquid XP
暂无更新日志
关于这个资源的讨论、问题反馈与使用心得
还没有讨论,来发第一帖吧
你是这个资源的作者?登录后可认领此资源。
相似资源
模组
一个用于收集生物掉落物的多区块模组。
模组
AE2:一款流行的自动化与存储模组
模组
基于 GTCEu 1.12.2 的现代 GregTech
模组
让你能够在世界中的任何位置定位结构。
模组
为你的终界增添新生物群系、神秘仪式和全新生物
模组
更多生物群系,更多生物,更多工具,为炽热的维度
评论 0
登录后参与评分
还没有评论,来抢沙发吧