MaceUtils
一款专为 Minecraft 1.21.11 战锤 PvP 设计的 Fabric HUD 与 GUI 模组
快速上手
在游戏中按下 Escape 键,然后点击选项按钮旁边的小 M 按钮即可打开 MaceUtils 菜单。
菜单包含三个标签页:Mace(战锤)、Spear(长矛) 和 Combat(战斗) —— 每个标签页控制一组不同的功能。菜单右上角的 Settings(设置) 按钮可访问高级选项。
Mace 标签页
战锤命中音效
当你命中战锤时播放弓箭命中时的“叮”声。音量和音调可在设置中配置。
伤害 HUD
当你手持战锤时,在屏幕左上角显示一个面板,展示你当前的下落高度以及预计造成的战锤伤害。带有颜色编码的进度条——当落差不足时显示红色,足够时显示绿色。切换离开战锤后逐渐淡出,若重新拿起则立即恢复。
Spear 标签页
长矛 HUD
手持任意长矛时出现在左侧的面板。显示内容如下:
- 速度计 —— 显示当前水平速度占最大蓄力伤害百分比的进度条,并附带预估伤害值
- 速度读数 —— 当前每秒移动方块数(blocks/tick)
- 刺击冷却条 —— 精确显示你的下一次攻击何时就绪
- 目标分析 —— 当准星对准活体实体时,显示其当前生命值、生命条,以及你的当前速度是否足以造成致命伤害,或者还需要多少速度
- 距离警告 —— 如果目标距离小于 2 格,闪烁提示
TOO CLOSE!(太近了!)
速度计开关
隐藏/显示速度条部分,仅保留冷却和目标信息。
距离警告开关
隐藏/显示过近警告。
Combat 标签页
战斗 HUD
一个位于右上角的滑动面板,在攻击任何实体时自动出现。功能包括:
- 目标名称与距离 — 根据距离以绿色/橙色/红色进行颜色编码的距离显示
- 生命值条 — 实时 HP,随着目标血量降低,颜色由绿变橙再变红
- 战斗计时条 — 每个目标有 15 秒倒计时,重新击中后重置
- 多目标追踪 — 追踪所有你击中的实体;前两个目标展开显示,其余紧凑显示并附带小型生命条
- 目标数量标签显示在面板头部
所有条目均带有滑入动画,并在目标死亡或超时后淡出。
战斗光环
当前处于你的战斗追踪器中的实体会获得红色轮廓光晕(仅客户端可见,仅你自己能看到)。
不死图腾 HUD
一个位于右下角的小型面板,显示整个背包中携带的不死图腾数量。具有动画效果——拾取图腾时会弹跳并闪烁绿色,使用掉图腾时会震动并闪烁红色。
重置计数器
将内部图腾触发计数器重置为零。适用于记录游戏时长。
设置界面
从主菜单右上角的设置按钮打开。
| 设置项 |
默认值 |
范围 |
| 战斗超时时间 |
15s |
5s – 60s |
| 生命值条 |
开启 |
— |
| 距离显示 |
开启 |
— |
| 计时条 |
开启 |
— |
| 目标数量 |
开启 |
— |
| HUD 不透明度 |
100% |
10% – 100% |
| 音效音调 |
1.0 |
0.5 – 2.0 |
| 音效音量 |
1.0 |
0.1 – 2.0 |
关闭菜单时,所有设置会自动保存。
命令
MaceUtils 在 /studiolib maceutils 下注册了子命令:
| 命令 |
描述 |
/studiolib maceutils status |
显示当前启用的功能 |
/studiolib maceutils reset-totem |
将图腾触发计数器重置为 0 |
/studiolib maceutils reload-config |
从磁盘重新加载配置 |
依赖
由 AttackStudioYT 制作 — YouTube
MaceUtils
A Fabric HUD & GUI mod built for Mace PVP on Minecraft 1.21.11
Getting Started
Press Escape in-game and click the small M button next to the Options button to open the MaceUtils menu.
The menu has three tabs: Mace, Spear, and Combat — each controlling a different set of features. A Settings button in the top-right of the menu gives access to advanced options.
Mace Tab
Mace Hit Sound
Plays a bow-hit ding sound whenever you land a mace hit. Volume and pitch are configurable in Settings.
Damage HUD
Displays a panel in the top-left corner when you're holding a mace showing your current fall height and the estimated mace damage it would deal. Color-coded bar — red when fall isn't
enough, green when it is. Fades out gradually after you switch off the mace, and snaps back if you pick it back up.
Spear Tab
Spear HUD
A left-side panel that appears while holding any spear. Shows:
- Velocity meter — bar showing your current horizontal speed as a percentage of max charge damage, with the estimated damage value
- Speed readout — current blocks/tick
- Jab cooldown bar — shows exactly when your attack is ready again
- Target analysis — when your crosshair is on a living entity, shows their current HP, a health bar, and whether your current speed is LETHAL or how much more speed you need
- Reach warning — flashes
TOO CLOSE! if your target is within 2 blocks
Velocity Meter toggle
Hides/shows the velocity bar portion if you just want the cooldown and target info.
Reach Warning toggle
Hides/shows the too-close alert.
Combat Tab
Combat HUD
A sliding panel in the top-right corner that appears automatically when you attack any entity. Features:
- Target name and distance — distance color-coded green/orange/red based on range
- Health bar — live HP with color that shifts green → orange → red as the target gets low
- Combat timer bar — 15-second countdown per target, resets on re-hit
- Multiple targets — tracks all entities you've hit; top 2 shown expanded, rest shown compact with a small health bar
- Target count label in the panel header
All entries animate in with a slide and fade out when targets die or time out.
Combat Glow
Entities currently in your combat tracker get a red outline glow (client-side only, visible only to you).
Totem HUD
A small panel in the bottom-right corner showing how many Totem of Undying you're carrying across your entire inventory. Animated — bounces and flashes green when you pick one up, shakes and
flashes red when one is consumed.
Reset Counter
Resets the internal totem pop counter back to zero. Useful for recording sessions.
Settings Screen
Open from the Settings button in the top-right of the main menu.
| Setting |
Default |
Range |
| Combat timeout |
15s |
5s – 60s |
| Health bar |
ON |
— |
| Distance display |
ON |
— |
| Timer bar |
ON |
— |
| Target count |
ON |
— |
| HUD opacity |
100% |
10% – 100% |
| Sound pitch |
1.0 |
0.5 – 2.0 |
| Sound volume |
1.0 |
0.1 – 2.0 |
All settings save automatically when you close the menu.
Commands
MaceUtils registers subcommands under /studiolib maceutils:
| Command |
Description |
/studiolib maceutils status |
Shows which features are currently enabled |
/studiolib maceutils reset-totem |
Resets totem pop counter to 0 |
/studiolib maceutils reload-config |
Reloads config from disk |
Requirements
Made by AttackStudioYT — YouTube
评论 0
登录后参与评分
还没有评论,来抢沙发吧