本模组尚未达到最终版本,将会频繁更新。请注意,后续更新中任何内容都可能发生变更。
Minecraft Automation 添加了有助于 Minecraft 自动化的方块和物品。对于想要建造工厂或自动化特定任务的人来说,它可能非常有用。
物品管道用于将物品从一个容器传输到另一个容器。它需要连接到物品泵的输出口以接收物品并形成流动。在交汇处,流动会被分成两半。
每种材质都有一种对应的物品管道:木头、铜、铁、金、钻石和下界合金。其中下界合金材质最强。
每种物品管道都有 3 项属性:
- 最大压力(10pu -> 10 压力单位):管道能承受的最大压力;如果物品管道的压力降至 0pu,它将停止工作;
- 每次传输的物品数量:每次传输的物品数;
- 传输冷却时间:管道完成一次传输所需的时间。
示例:
剧透

在这个装置中,物品从最右侧的箱子流向最左侧的箱子。
⚠️ 注意用于从最右侧箱子“拉取”物品的物品泵。

在另一个装置中,来自最右侧箱子的物品被平均分配到两个最左侧的箱子中。
物品泵用于将其输入端的物品拉取到输出端。它们用于给物品管道加压。
物品泵有三个属性:
- 诱导压力:将传递给物品管道的压力值;
- 每次传输的物品数量:每次传输的物品数;
- 传输冷却时间:管道完成一次传输所需的时间。
示例:
剧透

在这个装置中,泵从下方的箱子拉取物品,并将其推入物品管道(物品泵可以在没有物品管道的情况下工作)。随后物品进入上方的箱子。
⚠️ 注意指示流动方向的箭头。
流体管道的工作原理与物品管道类似,不同之处在于它们传输的是流体而非物品。它需要从流体源进行泵送才能工作(可能会变更)。流体在交汇处也会被均匀分配。
每种流体管道有 4 项属性:
- 最大压力:管道能承受的最大压力;如果流体管道的压力降至 0pu,它将停止工作;
- 每次传输的毫桶数(mB -> 毫桶:1000mB = 一桶):传输的流体量;
- 流体容量:管道可以存储的流体量;
- 传输冷却时间:管道完成一次传输所需的时间。
剧透

在这个装置中,流体泵正在从小湖中抽取流体,并通过管道将其输送到流体罐中。
流体泵用于从流体源(例如水源)或其他流体容器(例如流体罐)中抽取流体。它们用于给流体管道加压。
每种流体管道有 4 项属性:
- 诱导压力:将传递给流体管道的压力值;
- 每次传输的毫桶数(mB -> 毫桶:1000mB = 一桶):传输的流体量;
- 流体容量:管道可以存储的流体量;
- 传输冷却时间:管道完成一次传输所需的时间。
剧透

在这个装置中,流体泵从其下方的水源抽取流体,然后将其传输到上方的流体管道中。
⚠️ 注意指示流体流动方向的箭头。
流体罐用于存储流体。
每个流体罐仅有一项属性:
剧透

This mod is not at its final version. It will receive frequent updates. Be careful, anything is subject to change in later updates.
Minecraft Automation adds blocks and items that help with automation in Minecraft. It could be useful for people that want to build factories or automate certain tasks.
Item pipes are used to transport items from a container to another. It needs to be connected to the output of an item pump to receive items and create a flow. At intersection the flow will be split in half.
There is one item pipe for every material : wooden, copper, iron, gold, diamond and netherite. The latter is the most powerful.
Each item pipe has 3 stats :
- Max pressure (10pu -> 10 pressure units) : the maximum pressure that the pipe can handle, if the item pipes pressure reaches 0pu, it'll stop working;
- Items per transfer : the number of items per transfer;
- Transfer cooldown : how much time the pipe takes to transfer.
Exemple :
Spoiler

In this contraption, the items are going from the rightmost chest to the leftmost one.
⚠️ Mind the item pump that is used to "pull" the items from the rightmost chest.

In this other contraption, the items from the rightmost chest are split in half between the two leftmost chests.
Item pumps are used to pull items from their input to their output. They are used to pressurize the item pipes.
Item pumps have three stats :
- Induced pressure : the amount of pressure that will be passed to the item pipes;
- Items per transfer : the number of items per transfer;
- Transfer cooldown : how much time the pipe takes to transfer.
Exemple :
Spoiler

In this contraption, the pump is pulling items from the bottom chest, pushing them into the item pipe (the item pump can work without item pipes). The items then end up in the upper chest.
⚠️ Mind the arrow that indicates flow direction.
Fluid pipes behave like the item pipes, except that they transport fluid instead of items. It needs to pump from a fluid source to work (is subject to change). Fluid is also split evenly at intersections.
Each fluid pipe has 4 stats :
- Max pressure : the maximum pressure that the pipe can handle, if the item pipes pressure reaches 0pu, it'll stop working;
- mB per transfer (mB -> Milli-buckets : 1000mB = one bucket): the amount of fluid that is transfered;
- Fluid capacity : the amount of fluid that the pipe can store;
- Transfer cooldown : how much time the pipe takes to transfer.
Spoiler

In this contraption, the fluid pump is pumping fluid from the small lake into pipes that are connected to a fluid tank.
The fluid pump is used to pump fluids either from a fluid source (ie: a water source), or from another fluid container (ie: a fluid tank). They pressurize fluid pipes.
Each fluid pipe has 4 stats :
- Induced pressure : the amount of pressure that will be passed to the item pipes;
- mB per transfer (mB -> Milli-buckets : 1000mB = one bucket): the amount of fluid that is transfered;
- Fluid capacity : the amount of fluid that the pipe can store;
- Transfer cooldown : how much time the pipe takes to transfer.
Spoiler

In this contraption, the fluid pump is pumping from the water source that is beneath it, then transferring it to the fluid pipe above it.
⚠️ Mind the arrow that indicates fluid flow.
Fluid tanks are used to store fluids.
Each fluid tank only has one stat :
- Fluid capacity : the amount of fluid that is transfered.
Spoiler

评论 0
登录后参与评分
还没有评论,来抢沙发吧