NeoBiosphere
适用于 NeoForge 1.21.1 的 Biosphere(生物圈)世界生成模组。
NeoBiosphere 在主世界(Overworld)中生成大型网格对齐的球体(支持可选的上半球模式),同时保留原版生物群系采样行为。这使得不同的气候区和地形风格能够自然地出现在不同的球体中。您可以通过配置文件精细调整球体大小、间距、中心高度、桥梁行为等更多参数。
亮点
- 基于球体的主世界生成,布局整洁规整。
- 基于原版噪声生物群系采样的多生物群系支持。
- 高度可配置的参数:半径、间距、中心 Y 轴坐标、球体方块、桥梁选项等。
- 每个球体具有多样性:每个球体从可配置列表中随机获取大小和方块类型,但在世界重载时保持确定性。
- 可选的上半球模式,适合空岛或挑战类游戏体验。
- 自动生成球体间的桥梁,使探索更加顺畅。
- 通过 Biome Modifier(生物群系修饰器)和噪声路由集成实现兼容性导向的设计。
要求
- Minecraft: 1.21.1
- NeoForge: 21.1.216+
- Java: 21
安装
- 为 Minecraft 1.21.1 安装 NeoForge。
- 将模组 jar 文件放入
mods 文件夹。
- 启动游戏并创建新世界。
强烈建议使用全新世界,以避免与先前生成的区块产生边界冲突。
配置
开发环境中的配置文件路径:run/config/NeoBiosphere.toml
正常客户端/服务器安装中的典型路径:<game_dir>/config/NeoBiosphere.toml
主要设置
[Settings]
radius = 128
min_radius = 128
spacing = 500
center_y = 62
sphere_block = ["minecraft:glass"]
only_upper_hemisphere = false
generate_bridge = true
bridge_block = "minecraft:oak_planks"
bridge_radius = 1
radius: 最大球体半径。
min_radius: 最小球体半径。设置为与 radius 相等以固定球体大小;设置较低值以启用每个球体的随机大小。
spacing: 网格上球体中心点之间的距离。
center_y: 球体中心的 Y 轴层级。
sphere_block: 用于球体外壳的方块 ID 列表。每个球体根据其网格位置确定性地从列表中随机选择一种类型。例如 ["minecraft:glass", "minecraft:stone", "minecraft:obsidian"]。
only_upper_hemisphere: 启用后仅生成上半球。
generate_bridge: 启用或禁用相邻球体之间的桥梁。
bridge_block: 用于桥梁的方块。
bridge_radius: 桥梁半径(数值越大,桥梁越厚)。
调整说明
- 重叠行为取决于
spacing 与 2 * radius 的关系。
- 如果
spacing > 2 * radius,球体之间存在间隙。
- 如果
spacing = 2 * radius,球体相互相切。
- 如果
spacing < 2 * radius,球体重叠。
建议预设:
- 经典风格:
radius=128, min_radius=128, spacing=500, center_y=62
- 紧凑探索:
radius=160, min_radius=160, spacing=320, center_y=70
- 挑战模式:
only_upper_hemisphere=true, generate_bridge=true
- 多样化球体:
radius=180, min_radius=80, sphere_block=["minecraft:glass", "minecraft:stone", "minecraft:obsidian"]
兼容性
NeoBiosphere 旨在支持大多数地形/生态模组组合,但世界生成是一个高冲突领域。请注意:
-
通常兼容:
- 主要添加生物、植被、结构或地表特征的模组。
- 通过 Biome Modifiers(生物群系修饰器)追加内容的模组。
-
可能存在冲突:
- 直接替换
minecraft:overworld、minecraft:large_biomes 或 minecraft:amplified 噪声设置的模组或数据包。
- 深度修改 Carver、Aquifer 或 ChunkGenerator 管道的模组。
-
推荐做法:
- 将 NeoBiosphere 作为主要的形状定义模组。
- 在整合包中最终确定加载顺序和数据包优先级之前,请在新世界中测试。
涵盖的主世界噪声预设
当前版本包含对这些主世界预设的支持:
minecraft:overworld
minecraft:large_biomes
minecraft:amplified
常见问题解答
1. 为什么我的旧世界看起来不完整?
更改世界生成设置不会重新生成已创建的区块。建议使用新地图。
2. 为什么没有生成桥梁?
检查以下内容:
generate_bridge=true
bridge_radius >= 1
bridge_block 是有效的方块 ID
3. 为什么球体大小不同或使用不同的方块?
当 min_radius < radius 或 sphere_block 包含多个条目时,这是预期行为。每个球体根据其网格坐标确定性地选择自己的大小和方块类型,因此重新加载世界始终会产生相同的球体布局。
4. 为什么球体外壳方块未应用?
确保列表中的每个方块 ID 都是有效的,例如 minecraft:glass。无效的 ID 可能导致配置加载失败或回退行为。如果使用单个方块类型,列表仍必须格式化为 ["minecraft:glass"]。
5. 如果另一个地形模组发生冲突该怎么办?
首先检查两个模组是否都修改了主世界噪声设置或 Carver 流程。在严重冲突的情况下,只保留一个主要的形状定义模组。
许可协议
GNU General Public License v3.0
反馈
问题追踪器:
NeoBiosphere
A Biosphere world generation mod for NeoForge 1.21.1.
NeoBiosphere generates large grid-aligned spheres in the Overworld (with an optional upper-hemisphere mode) while preserving vanilla biome sampling behavior. This allows different climate zones and terrain styles to appear naturally across different spheres. You can fine-tune sphere size, spacing, center height, bridge behavior, and more through configuration.
Highlights
- Sphere-based Overworld generation with a clean grid layout.
- Multi-biome support based on vanilla noise biome sampling.
- Highly configurable parameters: radius, spacing, center Y, sphere block, bridge options, and more.
- Per-sphere variety: each sphere gets a random size and block type from configurable lists, while remaining deterministic across world reloads.
- Optional upper-hemisphere mode for sky-island or challenge-style gameplay.
- Automatic sphere-to-sphere bridges for smoother exploration.
- Compatibility-oriented implementation via Biome Modifier and noise routing integration.
Requirements
- Minecraft: 1.21.1
- NeoForge: 21.1.216+
- Java: 21
Installation
- Install NeoForge for Minecraft 1.21.1.
- Put the mod jar into your
mods folder.
- Launch the game and create a new world.
Using a fresh world is strongly recommended to avoid broken borders with previously generated chunks.
Configuration
Config file path in development environment: run/config/NeoBiosphere.toml
Typical path in normal client/server installations: <game_dir>/config/NeoBiosphere.toml
Main Settings
[Settings]
radius = 128
min_radius = 128
spacing = 500
center_y = 62
sphere_block = ["minecraft:glass"]
only_upper_hemisphere = false
generate_bridge = true
bridge_block = "minecraft:oak_planks"
bridge_radius = 1
radius: Maximum sphere radius.
min_radius: Minimum sphere radius. Set equal to radius for fixed-size spheres; set lower to enable per-sphere random sizing.
spacing: Distance between sphere center points on the grid.
center_y: Y level of sphere centers.
sphere_block: List of block IDs used for sphere shells. Each sphere randomly picks one type from the list, deterministically based on its grid position. For example ["minecraft:glass", "minecraft:stone", "minecraft:obsidian"].
only_upper_hemisphere: Generate only upper hemispheres when enabled.
generate_bridge: Enable or disable bridges between adjacent spheres.
bridge_block: Block used for bridges.
bridge_radius: Bridge radius (larger values make thicker bridges).
Tuning Notes
- Overlap behavior depends on
spacing versus 2 * radius.
- If
spacing > 2 * radius, spheres have gaps between them.
- If
spacing = 2 * radius, spheres are tangent.
- If
spacing < 2 * radius, spheres overlap.
Suggested presets:
- Classic style:
radius=128, min_radius=128, spacing=500, center_y=62
- Compact exploration:
radius=160, min_radius=160, spacing=320, center_y=70
- Challenge mode:
only_upper_hemisphere=true, generate_bridge=true
- Varied spheres:
radius=180, min_radius=80, sphere_block=["minecraft:glass", "minecraft:stone", "minecraft:obsidian"]
Compatibility
NeoBiosphere is designed to support most terrain/ecology mod setups, but world generation is a high-conflict area. Please note:
Covered Overworld Noise Presets
Current version includes support for these Overworld presets:
minecraft:overworld
minecraft:large_biomes
minecraft:amplified
FAQ
1. Why does my old world look incomplete?
Changing world generation settings does not regenerate already created chunks. A new world is recommended.
2. Why are bridges not generating?
Check the following:
generate_bridge=true
bridge_radius >= 1
bridge_block is a valid block ID
3. Why are spheres different sizes or using different blocks?
This is expected when min_radius < radius or when sphere_block contains multiple entries. Each sphere deterministically picks its own size and block type based on its grid coordinates, so reloading the world always produces the same sphere layout.
4. Why is the sphere shell block not applied?
Make sure each block ID in the list is valid, for example minecraft:glass. Invalid IDs can cause config load failure or fallback behavior. If using a single block type, the list must still be formatted as ["minecraft:glass"].
5. What should I do if another terrain mod conflicts?
First check whether both mods modify Overworld noise settings or Carver flow. In heavy conflicts, keep only one primary world-shape mod.
License
GNU General Public License v3.0
Feedback
Issue tracker:
评论 0
登录后参与评分
还没有评论,来抢沙发吧