🔒 Only TP
English | 中文
一款 Minecraft 服务端命令限制模组:让你的玩家只能使用传送命令,或者屏蔽所有非传送命令——无需赋予他们管理员权限。
📖 功能介绍
| 模式 | 效果 |
|---|---|
| 仅允许传送 (Allow TP only) | 普通玩家可以使用传送命令。其余行为保持原版。 |
| 屏蔽非传送 (Block non-TP) | 所有人均允许使用传送命令;其他所有命令将被屏蔽。可以为操作员提供额外的命令白名单。 |
| 同时启用 (Enable both) | 两种规则同时生效,各自拥有独立的豁免列表。 |
| 禁用模组 (Disable mod) | 无任何限制。 |
- 🚫 被屏蔽的命令会返回红色的
Only TP: This command has been disabled!提示。 - 🎮 被屏蔽的游戏模式切换会显示其专属的红色通知。
- ⭐ 每种模式都拥有独立的豁免列表——列表中的玩家永远不会受到限制。
- 🎯 支持为受限玩家配置可选的目标选择器(如
@a、@p等),可自由切换。
🚀 安装方法
- 将 jar 文件放入服务器的
mods文件夹中(支持 Forge、NeoForge 或 Fabric)。 - 启动服务器一次。
config/onlytp-common.toml和config/onlytp-client.toml会自动生成。 - 编辑该文件,或使用游戏内编辑器(见下文)。
- 选择一种模式,填写豁免列表,以及(如果需要的话)操作员命令白名单,然后保存。
该模组在服务端具有最高优先级。未安装此模组的客户端仍可正常游玩,只是无法打开编辑器。
🖱️ 游戏内编辑器
包含两个独立入口:
- 模组列表 → Only TP → Config。优先使用加载器自带的配置界面(如果存在);否则由 Cloth Config API 生成。因此,对于该入口,客户端需要安装 Cloth Config API(适用于所有加载器的 1.20.x 版本,以及 Fabric 的 1.21+ 版本)。
- 暂停菜单按钮——仅在安装了 AvalonBase 时出现,并打开 AvalonBase 的编辑器。
在游戏内编辑器中进行编辑需要服务器上的管理员权限(否则界面为只读状态)。如果服务器所有者关闭了该入口,模组列表中的入口将显示“入口已关闭”提示,且暂停菜单按钮会消失。
⚙️ 配置
两个配置文件均为纯 TOML 格式,随时可以手动编辑——更改会立即生效,无需重启服务器。
config/onlytp-common.toml —— 规则设定,由服务端决定并发送给客户端:
| 键名 | 含义 |
|---|---|
mode |
disabled / allow_tp_only / block_non_tp / both |
allow_entity_selectors |
是否允许使用目标选择器,如 @a |
enable_config_entry |
是否允许进入可视化编辑器(当存在 AvalonBase 时也会显示暂停菜单按钮) |
mode_allow_tp_only / mode_block_non_tp |
对应模式的豁免列表 |
command_whitelist |
在“屏蔽非传送”模式下,操作员额外可用的命令 |
config/onlytp-client.toml —— 每个客户端的偏好设置,不会发送到任何地方:
| 键 | 含义 |
|---|---|
gui_button_style |
0 = 现代风格,1 = 原版风格按钮 |
enable_animations |
界面打开/关闭动画 |
show_tips |
1 = 显示关于编辑器的游戏内提示 |
💡 使用须知
- 哪些指令算作“传送类指令”由模组决定,而非配置。
- 指令名匹配不区分大小写;前导的
/会被忽略。 - 所有判定均在服务端完成:仅在客户端安装模组只会添加可视化编辑器。
🔗 相关链接
- CurseForge:
- Modrinth:
- 源代码与问题反馈:
- 备用反馈页面:
🧩 可选依赖项
- AvalonBase — · — 添加暂停菜单编辑器。
- Cloth Config API — · — 在加载器没有原生配置界面时,用于模组列表配置条目的客户端必需项。
📄 许可证
MIT — Huziyang520
English | 中文
🔒 Only TP
一个 Minecraft 服务端指令限制模组:让玩家只能使用传送类指令,或者禁止所有非传送类指令 —— 无需授予管理员权限。
📖 功能介绍
| 模式 | 效果 |
|---|---|
| 非 OP 玩家仅允许 TP 指令 | 普通玩家可以使用传送类指令,其他指令保持原版行为。 |
| OP 玩家禁止非 TP 指令 | 所有人都能使用传送类指令;其他指令一律禁止。管理员可以额外配置一份命令白名单。 |
| 同时启用 | 两套规则同时生效,各自拥有独立的豁免名单。 |
| 关闭模组功能 | 完全不做限制。 |
- 🚫 被拦截的指令会收到红色文字提示
Only TP: 该指令已被禁止! - 🎮 被拦截的游戏模式切换会显示相应的提示。
- ⭐ 每种模式都有自己的豁免名单:名单中的玩家完全不受限制。
- 🎯 受控玩家是否可以使用
@a、@p等目标选择器,可单独开关。
🚀 安装
- 将 jar 文件放入服务端的
mods文件夹中(支持 Forge / NeoForge / Fabric)。 - 启动一次服务端,会自动生成
config/onlytp-common.toml和config/onlytp-client.toml。 - 直接修改文件,或使用游戏内编辑界面(见下文)。
- 选择好模式,填写好豁免名单(如需再配置管理员命令白名单),保存即可。
判定逻辑完全在服务端。即使客户端未安装也能正常游玩,只是无法打开编辑界面。
🖱️ 游戏内编辑界面
两个相互独立的入口:
- 模组列表 → Only TP → 配置。当加载器自带配置界面时使用自带的;否则由 Cloth Config API 生成,因此该入口在客户端需要 Cloth(适用于 1.20.x 全加载器及 1.21+ 的 Fabric 端)。
- 暂停菜单按钮 —— 仅在安装了 AvalonBase 时出现,打开的是 AvalonBase 的编辑界面。
编辑操作需要服务端管理员权限(否则界面为只读状态)。如果服主关闭了入口,模组列表入口将仅显示“入口已关闭”提示,暂停菜单按钮也不再出现。
⚙️ 配置文件
两个文件均为纯 TOML 文本,可随时手动修改,更改无需重启服务端即可生效。
config/onlytp-common.toml —— 规则配置,由服务端判定并下发给客户端:
| 键 | 含义 |
|---|---|
mode |
disabled / allow_tp_only / block_non_tp / both |
allow_entity_selectors |
是否允许 @a 等目标选择器 |
enable_config_entry |
是否允许进入可视化配置界面(若安装了 AvalonBase,同时也决定是否显示暂停按钮) |
mode_allow_tp_only / mode_block_non_tp |
对应模式的豁免玩家名单 |
command_whitelist |
在「禁止非 TP 指令」模式下,管理员可额外使用的指令 |
config/onlytp-client.toml —— 仅影响本机偏好,不参与同步:
| 键 | 含义 |
|---|---|
gui_button_style |
0 = 现代风格,1 = 原版风格按钮 |
enable_animations |
界面开/关动画 |
show_tips |
1 = 进入世界时提示一次编辑界面的用法 |
💡 使用须知
- 哪些指令算作“传送类指令”由模组内置决定,无需在配置中编写。
- 指令名匹配不区分大小写,开头的
/会被忽略。 - 所有判定均在服务端完成;客户端安装本模组只是为了获取可视化编辑界面。
🔗 相关链接
- CurseForge:
- Modrinth:
- 源码与问题反馈:
- 备用反馈地址:
🧩 可选前置
- AvalonBase —— · —— 提供暂停菜单编辑界面。
- Cloth Config API —— · —— 当加载器没有自带配置界面时,客户端打开模组列表配置入口需要它。
📄 许可证
MIT —— Huziyang520
🔒 Only TP
English | 中文
A server-side command limiter for Minecraft: let your players use teleport commands only, or block every non-teleport command — without giving them operator rights.
📖 What it does
| Mode | Effect |
|---|---|
| Allow TP only | Regular players may use teleport commands. Everything else stays vanilla. |
| Block non-TP | Teleport commands are allowed for everyone; every other command is blocked. Operators can be given an extra command whitelist. |
| Enable both | Both rules apply at once, each with its own exemption list. |
| Disable mod | No restriction at all. |
- 🚫 Blocked commands answer with a red
Only TP: This command has been disabled! - 🎮 Blocked game-mode switching shows its own red notice.
- ⭐ Every mode has its own exemption list — players on it are never restricted.
- 🎯 Optional target selectors (
@a,@p, …) for restricted players, switchable.
🚀 Installing
- Put the jar into your server's
modsfolder (Forge, NeoForge or Fabric). - Start the server once.
config/onlytp-common.tomlandconfig/onlytp-client.tomlare created automatically. - Edit the file, or use the in-game editor (below).
- Pick a mode, fill in the exemption list and — if you want one — the operator command whitelist, then save.
The mod is authoritative on the server. A client without it plays normally, it simply cannot open the editor.
🖱️ The in-game editor
Two independent entries:
- Mod list → Only TP → Config. Uses the loader's own configuration screen where one exists; otherwise it is generated by Cloth Config API, which is therefore needed on the client for that entry (1.20.x on every loader, 1.21+ on Fabric).
- Pause menu button — appears only with AvalonBase installed and opens AvalonBase's editor.
Editing requires operator permission on the server (the screen is read-only otherwise). If the server owner turns the entry off, the mod-list entry shows an "entry closed" notice and the pause button disappears.
⚙️ Configuration
Both files are plain TOML, safe to edit by hand at any time — changes apply without restarting the server.
config/onlytp-common.toml — the rules, decided on the server and sent to clients:
| Key | Meaning |
|---|---|
mode |
disabled / allow_tp_only / block_non_tp / both |
allow_entity_selectors |
Allow target selectors such as @a |
enable_config_entry |
Allow entering the visual editor (also shows the pause button when AvalonBase is present) |
mode_allow_tp_only / mode_block_non_tp |
Exemption lists of that mode |
command_whitelist |
Extra commands operators may use in "block non-TP" mode |
config/onlytp-client.toml — per-client preferences, never sent anywhere:
| Key | Meaning |
|---|---|
gui_button_style |
0 = modern look, 1 = vanilla-style buttons |
enable_animations |
Interface open/close animations |
show_tips |
1 = show the in-game tip about the editor |
💡 Good to know
- Which commands count as "teleport commands" is decided by the mod, not by the config.
- Command names are matched case-insensitively; a leading
/is ignored. - Everything is decided on the server: installing the mod on a client only adds the visual editor.
🔗 Links
- CurseForge:
- Modrinth:
- Source & issues:
- Backup feedback page:
🧩 Optional dependencies
- AvalonBase — · — adds the pause-menu editor.
- Cloth Config API — · — required on the client for the mod-list config entry where the loader has no native screen.
📄 License
MIT — Huziyang520
English | 中文
🔒 Only TP
一个 Minecraft 服务端的指令限制模组:让玩家只能使用传送类指令,或者禁止所有非传送指令 —— 不需要给他们管理员权限。
📖 它做什么
| 模式 | 效果 |
|---|---|
| 非OP玩家仅允许TP指令 | 普通玩家可以使用传送类指令,其它指令保持原版行为。 |
| OP玩家禁止非TP指令 | 所有人都能用传送类指令;其它指令一律禁止。管理员可以额外配一份命令白名单。 |
| 同时启用 | 两套规则同时生效,各自带独立的豁免名单。 |
| 关闭模组功能 | 完全不做限制。 |
- 🚫 被拦截的指令会收到红字
Only TP: 该指令已被禁止! - 🎮 被拦截的游戏模式切换会显示对应的提示。
- ⭐ 每个模式都有自己的豁免名单:名单里的玩家完全不受限制。
- 🎯 受控玩家是否可用
@a、@p这类目标选择器,可单独开关。
🚀 安装
- 把 jar 放进服务端的
mods文件夹(Forge / NeoForge / Fabric)。 - 启动一次服务端,会自动生成
config/onlytp-common.toml与config/onlytp-client.toml。 - 直接改文件,或使用游戏内编辑界面(见下)。
- 选好模式、填好豁免名单(需要的话再配管理员命令白名单),保存即可。
判定完全在服务端。客户端不装也能正常玩,只是打不开编辑界面。
🖱️ 游戏内编辑界面
两个互相独立的入口:
- 模组列表 → Only TP → 配置。加载器自带配置界面时就用自带的;否则由 Cloth Config API 生成,所以该入口在客户端需要 Cloth(1.20.x 全加载器、1.21+ 的 Fabric 端)。
- 暂停菜单按钮 —— 只在装了 AvalonBase 时出现,打开的是 AvalonBase 的编辑界面。
编辑需要在服务端拥有管理员权限(否则界面只读)。服主关闭入口后,模组列表入口只显示「入口已关闭」提示,暂停菜单按钮也不再出现。
⚙️ 配置文件
两个文件都是纯 TOML 文本,随时可以手改,改动无需重启服务端即可生效。
config/onlytp-common.toml —— 规则,由服务端判定并下发给客户端:
| 键 | 含义 |
|---|---|
mode |
disabled / allow_tp_only / block_non_tp / both |
allow_entity_selectors |
是否允许 @a 这类目标选择器 |
enable_config_entry |
是否允许进入可视化配置界面(装了 AvalonBase 时也决定暂停按钮) |
mode_allow_tp_only / mode_block_non_tp |
对应模式的豁免玩家名单 |
command_whitelist |
「禁止非TP指令」模式下管理员可额外使用的指令 |
config/onlytp-client.toml —— 只影响本机的偏好,不参与同步:
| 键 | 含义 |
|---|---|
gui_button_style |
0 = 现代风格,1 = 原版风格按钮 |
enable_animations |
界面开/关动画 |
show_tips |
1 = 进世界时提示一次编辑界面的用法 |
💡 使用须知
- 哪些指令算「传送类指令」由模组内置决定,不需要在配置里写。
- 指令名不区分大小写,开头的
/会被忽略。 - 所有判定都在服务端完成;客户端装本模组只是为了拿到可视化编辑界面。
🔗 相关链接
- CurseForge:
- Modrinth:
- 源码与问题反馈:
- 备用反馈地址:
🧩 可选前置
- AvalonBase —— · —— 提供暂停菜单编辑界面。
- Cloth Config API —— · —— 加载器没有自带配置界面时,客户端打开模组列表配置入口需要它。
📄 许可证
MIT —— Huziyang520
下载 Only TP
下载 Only TP
下载 Only TP
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Only TP
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Only TP
下载 Only TP
下载 Only TP
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Only TP
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Only TP
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Only TP
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
暂无更新日志
关于这个资源的讨论、问题反馈与使用心得
还没有讨论,来发第一帖吧
你是这个资源的作者?登录后可认领此资源。
相似资源
模组
显示你正在注视的方块的信息。(适用于 Minecraft 1.16+ 的 Hwyla/Waila 分支)
模组
查看物品与配方
模组
在游戏画面角落显示附近世界地形、玩家、生物和实体的地图。可创建路径点,帮助你找到标记过的位置。
模组
使用 JavaScript 编辑配方、添加自定义物品、编写世界事件!
模组
AE2:一款流行的自动化与存储模组
模组
添加区块认领和玩家组队功能,并与 Xaero's Minimap 和 World Map 集成
评论 0
登录后参与评分
还没有评论,来抢沙发吧