PrimeSlots
在屏幕上永久显示你装备的遗物套装——这样你就不必频繁打开 /slots 来查看自己当前装备了什么。
此模组仅在 PrimeBlocks 上生效。 在其他服务器上,它将保持静默且无任何作用。
显示内容
Money (Set II)
d20 VI d12 VI d6 V d0 VI
d20+d12: +10,0% Job Münzen, -40,0% Job XP
d6+d0: +5,0% Shiny-Chance
Werte
+21,2% Job Münzen
-12,0% Größe
+10,5% Regeneration
+9,0% Standfestigkeit
...
你的套装名称、四个已装备的遗物、两组配对协同效果,以及下方的有效总属性值——即经过所有遗物和协同效果计算后你实际获得的数值。这与游戏在遗物菜单中“遗物属性”里显示的汇总相同,只不过它会一直保持在屏幕上可见。
切换套装时,显示内容会随之更新。切换 CityBuild 服务器时,模组会加载新服务器的遗物数据。如果在新服务器上没有任何遗物,显示区域将保持空白,而不会错误地显示来自之前 CityBuild 的遗物信息。
安装设置
无需额外配置。将模组放入 mods 文件夹即可。
首次加入 PrimeBlocks 时,聊天栏会出现一行可点击的文字:
[PrimeSlots] Einmalige Freischaltung — ein Klick:
[ /login 1234 ]
直接点击该行即可完成一次性激活。此后模组会记住激活状态,即使重启游戏也不会丢失。该模组不添加任何自定义命令——因此你无需记忆任何指令。
按键绑定
| 按键 |
功能 |
| F6 |
移动和调整显示位置 |
| F7 |
开关显示 |
以上仅为默认按键绑定。你可以按照常规方式在 选项 → 控制 → 其他 中进行修改。
在设置界面(按 F6)中,你可以用鼠标拖动显示框到你想要的位置。通过左键或右键点击大小按钮可以调整显示比例(50%–300%)。此外,你还可以单独选择要显示的内容:背景(包括完全透明)、遗物图标、每个遗物的单项属性、协同效果、总属性值——以及是否同时显示负值还是仅显示增益部分。
PrimeSlots
Zeigt dein ausgerüstetes Relikt-Set dauerhaft auf dem Bildschirm — damit du nicht ständig /slots aufmachen musst, um zu sehen, was du eigentlich anhast.
Dieser Mod funktioniert ausschließlich auf PrimeBlocks. Auf anderen Servern bleibt er still und tut nichts.
Was du siehst
Money (Set II)
d20 VI d12 VI d6 V d0 VI
d20+d12: +10,0% Job Münzen, -40,0% Job XP
d6+d0: +5,0% Shiny-Chance
Werte
+21,2% Job Münzen
-12,0% Größe
+10,5% Regeneration
+9,0% Standfestigkeit
...
Dein Set-Name, die vier ausgerüsteten Relikte, beide Paar-Synergien und darunter die effektiven Gesamtwerte — also was nach Verrechnung aller Relikte und Synergien tatsächlich bei dir ankommt. Das ist dieselbe Aufstellung, die dir das Spiel im Reliktmenü unter „Relikt-Werte" zeigt, nur eben permanent sichtbar.
Wechselst du dein Set, ändert sich die Anzeige mit. Wechselst du den CityBuild, lädt der Mod die Relikte des neuen Servers. Hast du dort keine, bleibt die Anzeige leer, statt dir die vom vorherigen CityBuild vorzugaukeln.
Einrichtung
Keine. Mod in den mods-Ordner legen, fertig.
Beim ersten Mal auf PrimeBlocks erscheint im Chat eine Zeile zum Anklicken:
[PrimeSlots] Einmalige Freischaltung — ein Klick:
[ /login 1234 ]
Draufklicken genügt. Danach merkt sich der Mod die Freischaltung, auch über Neustarts hinweg. Der Mod fügt keine eigenen Befehle hinzu — es gibt nichts, was du dir merken müsstest.
Tasten
| Taste |
Funktion |
| F6 |
Anzeige verschieben und einstellen |
| F7 |
Anzeige an/aus |
Beides sind nur Vorgaben. Umstellen kannst du sie ganz normal unter Optionen → Steuerung → Sonstiges.
Im Einstellungsfenster (F6) ziehst du die Anzeige mit der Maus dorthin, wo du sie haben willst. Die Größe änderst du per Links-/Rechtsklick auf den Größe-Knopf (50–300 %). Darüber schaltest du einzeln um, was angezeigt wird: Hintergrund (auch komplett transparent), Relikte, Einzelwerte pro Relikt, Synergien, Gesamtwerte — und ob negative Werte mit angezeigt werden oder nur die Boni.
PrimeSlots
Displays your equipped relic set permanently on screen — so you don't have to keep opening /slots just to check what you're currently using.
This mod works exclusively on PrimeBlocks. On other servers, it stays inactive and does nothing.
What you see
Money (Set II)
d20 VI d12 VI d6 V d0 VI
d20+d12: +10.0% Job Coins, -40.0% Job XP
d6+d0: +5.0% Shiny Chance
Stats
+21.2% Job Coins
-12.0% Size
+10.5% Regeneration
+9.0% Stability
...
Your set name, the four equipped relics, both pair synergies, and the effective total stats underneath — meaning the values you actually end up with after all relics and synergies have been calculated together. This is the same overview the game shows you under "Relic Stats" in the relic menu, except that it remains permanently visible on your screen.
When you switch your set, the display updates automatically. When you switch CityBuild servers, the mod loads the relics from the new server. If you don't have any relics there, the display stays empty instead of showing relics from your previous CityBuild.
Setup
None. Put the mod into your mods folder and you're done.
The first time you join PrimeBlocks, a clickable line will appear in chat:
[PrimeSlots] One-time activation — one click:
[ /login 1234 ]
Just click it. After that, the mod remembers the activation, even after restarting the game. The mod adds no custom commands — so there is nothing you need to remember.
Keys
| Key |
Function |
| F6 |
Move and configure the display |
| F7 |
Toggle the display on/off |
These are only the default keybinds. You can change them as usual under Options → Controls → Miscellaneous.
In the settings screen (F6), simply drag the display with your mouse to wherever you want it. You can change its size by left- or right-clicking the size button (50–300%). You can also individually choose what should be displayed: background (including fully transparent), relics, individual stats for each relic, synergies, total stats — and whether negative values should be shown as well or only bonuses.
评论 0
登录后参与评分
还没有评论,来抢沙发吧