Pull My Pearl ?
Pull My Pearl 是一款轻量级、100% 客户端的 Fabric 模组,专为在多人服务器(如 SMP、DonutSMP、PvP 网络等)上使用末影珍珠静止室(Ender Pearl stasis chambers)的玩家打造。

无需任何服务端插件或服务器模组! 当你处于危险中时,只需按下你指定的按键,即可立即在你的队友屏幕上触发高优先级的视觉 HUD 通知和音频警报,让他们能毫不拖延地来拉你的珍珠。
[!IMPORTANT]
⚠️ 工作原理及关键的服务器/聊天设置
- 通信机制: 该模组完全在客户端运行,通过在你们和你队友之间发送加密的后台私信 (
/msg) 进行工作。模组会自动隐藏这些原始数据包,使你的聊天框保持完全干净。- ? 跨子服务器网络支持: 由于警报使用服务器的原生耳语系统 (
/msg),它支持跨子服务器网络(例如 DonutSMP 欧洲与亚洲领域、BungeeCord、Velocity)。只要服务器允许跨子服务器进行私聊,即使你和队友位于完全不同的领域或维度,警报也能送达!- 必须允许私信: 两名玩家都必须能够接收彼此的耳语。如果你的目标服务器有隐私设置(例如
/settings或/msg toggle),请确保 “Who can message me”(谁能给我发消息)设置为 Everyone(所有人)或 Friends/Party(好友/队伍)。- 必须显示聊天: 请确保你在 Options (选项) -> Chat Settings (聊天设置) -> Chat: Shown 中启用了游戏内聊天可见性。如果耳语被服务器隐私开关阻止或过滤,警报将不会被接收!
[!WARNING]
⌨️ 键位冲突警告
如果 Pearl Pull Key(拉珍珠键)与其他模组或 Minecraft 控制键绑定为同一个键,可能会因冲突导致键位注册失败! 请确保你在 Options (选项) -> Controls (控制) -> Key Binds (键位绑定) 中将其分配给一个 未使用的 / 无冲突的键,或者通过游戏内的 Pull My Pearl 设置菜单(
Right Shift)直接设置。
✨ 功能特性
- 100% 客户端侧: 在任何原版或整合包 Minecraft 服务器上开箱即用。
- ? 跨服务器/子服务器兼容: 只要在服务器间
/msg功能正常,它就能在代理网络(如 DonutSMP 子领域)上工作。 - 视觉警报卡片: 在屏幕上显示带有脉冲边框和实时倒计时的动画 HUD 卡片。
- 音频警报: 播放独特的高音音符盒警报声,即使你切出游戏,队友也能瞬间注意到。
- 防垃圾信息保护: 内置 5 秒冷却时间,防止意外消息泛滥。
- ModMenu 集成: 可直接在游戏内或通过 ModMenu 配置屏幕轻松调整音量、切换声音或重新绑定按键。
? 命令
使用 /pteam 命令管理你的静止搭档:
/pteam invite <player>— 向指定玩家发送组队邀请。/pteam accept [player]— 接受传入的组队邀请。/pteam leave— 离开当前队伍。/pteam status— 检查当前的队伍连接状态。
?️ 控制方式(默认)
- 发送珍珠警报:
P(可在设置中更改) - 打开设置 GUI:
Right Shift(右 Shift 键)
? 依赖要求
- Minecraft:
1.21.x/26.x - Fabric Loader:
0.16.0或更高版本 - Fabric API
- ModMenu (用于游戏内设置 GUI)
Pull My Pearl ?
Pull My Pearl is a lightweight, 100% client-side Fabric mod built for players using Ender Pearl stasis chambers on multiplayer servers (SMPs, DonutSMP, PvP networks, etc.).

▶️ Click Here To Listen Alarm?
No server-side plugins or server mods required! When you are in danger, simply press your designated key to trigger an immediate, high-priority visual HUD notification and audio alarm on your teammate's screen so they can pull your pearl without delay.
[!IMPORTANT]
⚠️ How It Works & Crucial Server / Chat Settings
- Communication Mechanism: This mod operates entirely client-side by sending encrypted background direct messages (
/msg) between you and your teammate. The mod automatically hides these raw packets from your chatbox so your chat remains completely clean.- ? Cross-Server Network Support: Because alerts use the server's native whisper system (
/msg), it supports cross-subserver networks (e.g. DonutSMP Europe & Asia realms, BungeeCord, Velocity). As long as the server allows private messaging across subservers, the alarm will reach your teammate even if you are on completely different realms or dimensions!- Direct Messages Must Be Allowed: Both players must be able to receive whispers from each other. If your target server has privacy settings (e.g.
/settingsor/msg toggle), make sure "Who can message me" is set to Everyone or Friends/Party.- Chat Must Be Shown: Ensure your in-game chat visibility is enabled in Options -> Chat Settings -> Chat: Shown. If whispers are blocked or filtered out by server privacy toggles, alarms will not be received!
[!WARNING]
⌨️ Keybind Conflict Warning
If the Pearl Pull Key is bound to the same key as another mod or Minecraft control, key registration may fail due to conflicts! Please ensure you assign it to an unused / conflict-free key in Options -> Controls -> Key Binds or directly through the in-game Pull My Pearl settings menu (
Right Shift).
✨ Features
- 100% Client-Side: Works out of the box on any vanilla or modded Minecraft server.
- ? Cross-Server / Subserver Compatible: Works across proxy networks (like DonutSMP sub-realms) as long as
/msgfunctions across servers. - Visual Alert Card: Displays an animated on-screen HUD card with pulsing borders and a real-time countdown timer.
- Audio Alarm: Plays distinct high-pitched note block alerts so your teammate notices instantly even when tabbed out.
- Spam Protection: Built-in 5-second cooldown to prevent accidental message flooding.
- ModMenu Integration: Easily adjust volume, toggle sound, or rebind keys directly in-game or via the ModMenu config screen.
? Commands
Use the /pteam command to manage your stasis partner:
/pteam invite <player>— Sends a team invite to the specified player./pteam accept [player]— Accepts an incoming team invite./pteam leave— Leaves your current team./pteam status— Checks your current team connection status.
?️ Controls (Default)
- Send Pearl Alarm:
P(Configurable in settings) - Open Settings GUI:
Right Shift
? Requirements
- Minecraft:
1.21.x/26.x - Fabric Loader:
0.16.0or newer - Fabric API
- ModMenu (for in-game settings GUI)
下载 Pull My Pearl
下载 Pull My Pearl
下载 Pull My Pearl
下载 Pull My Pearl
下载 Pull My Pearl
下载 Pull My Pearl
下载 Pull My Pearl
下载 Pull My Pearl
暂无更新日志
关于这个资源的讨论、问题反馈与使用心得
还没有讨论,来发第一帖吧
你是这个资源的作者?登录后可认领此资源。
相似资源
模组
显示你正在注视的方块的信息。(适用于 Minecraft 1.16+ 的 Hwyla/Waila 分支)
模组
使用 JavaScript 编辑配方、添加自定义物品、编写世界事件!
模组
查看物品与配方
模组
在游戏画面角落显示附近世界地形、玩家、生物和实体的地图。可创建路径点,帮助你找到标记过的位置。
模组
AE2:一款流行的自动化与存储模组
模组
那是什么?一个 Waila/Hwyla 的分支。
评论 0
登录后参与评分
还没有评论,来抢沙发吧