你是否曾看着满场的牛,心想:“为什么我不能真正有效地驱赶它们呢?”
这基本上就是 Ranchcraft 存在的原因。
Ranchcraft 是一款专注于行为逻辑的家畜驱赶模组,围绕从马背上使用工作动物展开。没有魔法口哨、特殊的驱赶棒、菜单、命令或需要学习的新生物。骑上马匹,调整位置,利用压力和移动来管理畜群。
家畜只注意玩家骑乘的马匹。空无一人的马站在田野里对它们来说毫无意义,但一旦有人跨上马鞍,情况就会改变。
从后方接近畜群,它们会远离你。绕到侧面,你可以引导它们。如果太激进地直接穿过中间,它们会四散奔逃,因为有时候把一匹组织有序的牛群变成混乱的最快方法,就是把马放在它不该出现的地方。
驱赶
在工作时,动物不再表现得像是一堆完全无关的 Minecraft 生物集合体。
它们形成临时畜群,保持松散聚集,跟随附近同伴的移动轨迹,一起行进而不是各自选择不同方向。
不同的家畜也有不同的行为表现。
- 牛稳定且可预测。
- 羊紧密聚集,非常不喜欢被分开。
- 猪合作程度稍低,更难引导。
- 鸡在近距离反应迅速,容易散开。
- 骆驼不太愿意屈服于轻微的压力。
- 马速度更快,更敏感,更难干净利落地驾驭。
施加足够的压力,家畜就会奔跑,而不是在你礼貌地在后面等待时慢慢溜走。
分离
Ranchcraft 还允许你将单个动物从主畜群中分离出来。
不涉及任何目标按钮。
将动物向群体边缘移动,将你的马放在它与畜群之间,并保持间隙。
动物最初会试图返回。它可能会尝试从你马匹的两侧绕过,因此你需要重新定位并继续对返回路线施加压力。
如果你成功维持了分离,该动物最终会停止拼命试图重新连接,可以被单独管理。
成年家畜故意更容易被留下。一旦成年个体被正确分离,其余畜群不会转身回来寻找它们。
幼崽则不同。
尝试分离幼崽,畜群可能会回头去找它,使任务变得困难得多。
祝你好运。?
精准牲畜作业
你在单个动物周围的位置也很重要。
从后方工作,鼓励其向前移动。
向一侧移动,动物就会转向远离。
跑到其平衡点前方,可以减缓其速度、重定向或阻止其向前推进。
这使得有可能将单个动物引导至栅栏处,防止它们滑回畜群,并在不需要任何人造控制系统的情况下进行更精准的分离操作。
协作工作
Ranchcraft 支持多名骑手共同管理同一畜群。
没有分配的角色或团队菜单。你的角色完全取决于你的骑行位置。
一名骑手可以从后方驱赶,另一名骑手则可以控制侧翼。
两名骑手可以在两侧施加压力,让家畜向前方的开放空间移动。
另一名骑手可以控制主畜群,而其他人则将单个动物分离出来。
如果几名骑手将家畜围得太紧,畜群可能会挤成一团,直到有人释放压力并为它们提供去向为止。
骑行位置比单纯投入更多马匹更重要。
不要穿过畜群
你绝对可以这么做。
你可能会后悔。
在畜群外侧工作会产生可控的群体移动。
直接将马匹驾驶穿过畜群会造成畜群突破,导致附近的动物打破队形并向马匹四周散开。
有时这很有用。
有时你只是刚刚把杰拉德送到了另一个邮政编码区域。
牵引绳
如果动物系有牵引绳,Ranchcraft 完全不管它。
被拴住的家畜不会被骑在马上的玩家驱赶、分离、散开或精准控制。
它们仅根据 Minecraft 或其所属的家畜模组的行为表现,直到牵引绳被移除为止。
兼容性
Ranchcraft 内置了以下模组的可选兼容性:
两种集成均为可选。Ranchcraft 运行不需要依赖任一模组。
Ranchcraft 支持其相关的家畜和马匹实体,同时不替换它们的遗传系统、繁殖系统或其他原生行为。
可配置
Ranchcraft 包含一套完整的服务器端配置,涵盖行为系统的主要部分,包括畜群形成、间距、压力、移动速度、散开行为、屠宰、精准处理、合作骑手以及物种特异性行为。
默认设置旨在提供预期的 Ranchcraft 体验,因此你只需安装模组即可开始管理牲畜,无需进行任何额外调整。
热衷于将配置文件变成第二份职业的整合包制作者也备受欢迎。
COMPATIBILITY UPDATE!
* Star Worm Equestrian Mod
* Icy's Better Horses
Keep your eyes open; big things are on the horizon of this ranch...
Ranchcraft
Ever looked at a field full of cows and thought, “Why can’t I actually herd these properly?”
That is basically why Ranchcraft exists.
Ranchcraft is a behaviour-focused livestock herding mod built around working animals from horseback. There are no magic whistles, special herding sticks, menus, commands or new mobs to learn. Get on a horse, ride into position, and use pressure and movement to work the herd.
Livestock pay attention to player-ridden horses only. An empty horse standing in a field means absolutely nothing to them, but once somebody gets in the saddle, things change.
Approach a herd from behind and they will move away from you. Work around the sides and you can steer them. Ride too aggressively straight through the middle and they will scatter, because sometimes the quickest way to turn an organised cattle drive into chaos is to put a horse exactly where it should not be.
Herding
Animals no longer behave like a collection of completely unrelated Minecraft mobs when being worked.
They form temporary herds, stay loosely grouped, follow the movement of nearby herd members and travel together rather than all choosing different directions.
Different livestock also behave differently.
- Cattle are steady and predictable.
- Sheep stay tightly grouped and really do not enjoy being separated.
- Pigs are a little less cooperative and more awkward to steer.
- Chickens react quickly at close range and scatter readily.
- Llamas are more reluctant to yield to light pressure.
- Horses are faster, more sensitive and much harder to work cleanly.
Apply enough pressure and livestock will run, not slowly wander away while your horse politely waits behind them.
Cutting
Ranchcraft also allows you to cut individual animals away from the main herd.
There is no target button involved.
Move an animal toward the edge of the group, place your horse between it and the herd, and hold the gap.
The animal will initially try to get back. It may try to slip around either side of your horse, so you need to reposition and keep pressure on the return route.
If you maintain the separation successfully, the animal eventually stops desperately trying to reconnect and can be worked separately.
Adult livestock are intentionally easier to leave behind. Once an adult is being properly cut, the rest of the herd will not turn around and come collecting them.
Babies are different.
Try separating a baby and the herd may turn back for it, making the job considerably harder.
Good luck. ?
Precision Stock-Working
Your position around an individual animal matters too.
Work from behind and you encourage forward movement.
Move toward one side and the animal turns away.
Get ahead of its point of balance and you can slow it, redirect it or prevent it from pushing forward.
This makes it possible to work individual animals toward gates, keep them from slipping back into the herd, and perform much more precise cuts without needing any artificial control system.
Work Together
Ranchcraft supports multiple riders working the same herd.
There are no assigned roles or team menus. Your role comes entirely from where you ride.
One rider can drive from behind while another holds a flank.
Two riders can create pressure on both sides and keep livestock moving through the open space ahead.
Another rider can hold the main herd while somebody else cuts an individual animal away.
If several riders surround livestock too tightly, the herd may bunch up until somebody releases pressure and gives them somewhere to go.
Riding position matters more than simply throwing more horses at the problem.
Do Not Ride Through The Herd
You absolutely can.
You may regret it.
Working around the outside of livestock creates controlled herd movement.
Driving your horse directly between them creates a herd breach, causing nearby animals to break formation and scatter away from the horse.
Sometimes that is useful.
Sometimes you have just launched Gerald into another postcode.
Leads
If an animal is attached to a lead, Ranchcraft leaves it alone completely.
Leashed livestock are not herded, cut, scattered or precision-controlled by mounted horses.
They simply behave according to Minecraft or whichever livestock mod they belong to until the lead is removed.
Compatibility
Ranchcraft has built-in optional compatibility for:
Both integrations remain optional. Ranchcraft does not require either mod to run.
Ranchcraft supports their relevant livestock and horse entities without replacing their genetics, breeding systems or other native behaviour.
Configurable
Ranchcraft includes a full server-side configuration covering the major parts of the behaviour system, including herd formation, spacing, pressure, movement speed, scatter behaviour, cutting, precision handling, cooperative riders and species-specific behaviour.
The default settings are designed around the intended Ranchcraft experience, so you can simply install the mod and start working livestock without touching anything.
Modpack creators who enjoy turning config files into a second occupation are also very welcome.
评论 0
登录后参与评分
还没有评论,来抢沙发吧