ReTrace
完全客户端运行。
ReTrace 将你的移动轨迹转化为一条通往家的“活”面包屑路径。与其在山脉、洞穴、墙壁和建筑间盲目猜测直线,它会记住你实际走过的路线,并通过简洁的线框或鲜艳悬浮光球引导你返回。
无论你是正在探索复杂的洞穴网络、因走得太远而远离基地、穿越传送门,还是试图从巨型建筑中脱身,ReTrace 都能提供一条清晰、可靠且易于跟随的返程路径。
ReTrace 的独特之处
- 记录你实际行走的路线,而非绘制虚假捷径。
- 即使尚未形成完整路径,也能通过信标式指引提供帮助。
- 针对传送门和瞬移导致的路线中断,提供特殊的间隙引导。
- 支持选择氛围感十足的华丽光球轨迹或简洁的线框视觉效果。
- 提供完整的游戏内配置界面,包含深入的视觉和行为控制选项。
- 确保体验清晰流畅,让你在长时间游玩时轻松建立信任感。
快速开始
默认按键:H
- 按
H 在当前所在位置启动 ReTrace 并开始学习你的路线。
- 再次按
H 可在探索过程中显示或隐藏路线。
- 长按
H 可清除当前路线和目的地,重新开始。
- 如果你想标记特定位置而非当前位置,请使用
/retrace sethere 或 /retrace set <x> <y> <z>。
- 使用
/retrace config open 打开完整配置菜单。
ReTrace 默认以 简单模式 启动,因此它可以 quietly 开始学习你的路径,并在你需要时将其显示出来。
记忆并学习你世界的路线
ReTrace 会记录你实际穿过世界的路径,并将其转化为可复用的路线。这意味着你的回家之路会遵循你的隧道、转弯、楼梯、桥梁、屋顶、洞穴入口和基地走廊,而不是假装世界是平坦且无障碍的。
这在普通路标模组不再有用的地方效果显著:
- 多层重叠的洞穴系统
- 视线受阻的森林和山区
- 拥有分层路径的大型基地
- 难以事后回忆的即兴探索路线
结果就是那种熟悉的引导感,因为它基于你真正去过的地方。
智能返程引导
一旦 ReTrace 积累了足够的路线记忆,它就能计算出回到目的地的路径,并以清晰的节点和连接线轨迹呈现。
这条轨迹专为一目了然地跟随而设计:
- 面包屑间距合理,便于阅读而非杂乱无章
- 下一个重要节点会被强调
- 目的地标记清晰可辨
- 到达目的地时可自动停止引导
感觉就像你的世界悄悄为你画出了一条回家的路。
尚无路线时的信标回退机制
即使尚未学会路线,ReTrace 依然能提供帮助。
如果你设置了目的地但尚未记录可用的返程路径,ReTrace 会切换到信标式引导模式。它不会让你一无所获,而是提供一条指向目标的直接引导链,帮助你定位自己,并在途中开始构建路线记忆。
这在以下情况特别有用:
- 你刚刚标记了一个新目的地
- 你在记录足够多的返程路径前走得太远
- 你试图从新角度重新连接到一个已知地点
传送门与瞬移间隙引导
ReTrace 专为那些路线不再物理连续的时刻而设计。
当你的路径穿越传送门或其他突然的过渡区域时,ReTrace 可以检测到这些间隙并提供引导,避免轨迹中出现令人困惑的中断。在这些过渡期间,它会显示特殊的引导标记,帮助你重新连接到另一侧的路线。
这意味着更少遇到“轨迹突然消失”的情况,更多体验到“我知道下一步该去哪”。
华丽光球轨迹或经典线框
ReTrace 不局限于单一外观。
你可以选择:
- 华丽模式:使用发光的经验值风格光球,色彩丰富且带有动态效果
- 线框模式:提供清晰、极简的路径可读性
- 双渲染:同时显示两种样式
当你希望路线感觉充满生机而非纯粹实用时,华丽模式尤其令人满意。面包屑看起来像可收集的路径灯光,信标路径以温暖的引导色突出显示,整个路线在快速移动时也更容易阅读。
如果你偏好更干净的技术风格,线框模式为你提供精确的面包屑路径,且没有视觉噪音。
移动时的清晰反馈
ReTrace 旨在清晰沟通而不干扰你的操作。
它包括:
- 用于显示活动路线状态的 HUD
- 信标引导的距离反馈
- 路线操作的音频提示
- 在华丽模式下穿越面包屑时的拾取式反馈
- 对重要路线点的清晰视觉强调
目标很简单:你应该能够感觉到路线正在提供帮助,而无需频繁停下来仔细研究。
深度的游戏内自定义
ReTrace 高度可配置,你无需退出游戏即可调整设置。
使用以下命令打开配置菜单:
/retrace config open
在那里你可以调整主要类别,例如:
- 输入行为
- 路线记录灵敏度
- 路由行为
- 渲染样式
- 华丽光球视觉效果
- HUD 选项
- 求解器行为
这意味着你可以将 ReTrace 调整为你想要的任何体验:
- 微妙且极简
- 明亮且具有电影感
- 精确且技术性
- 柔和且易读,适合长时间探索
实用指令
ReTrace 几乎完全可以在游戏流程中使用,但当你需要直接控制时,也可以使用指令。
使用 ReTrace 最快的方式仍然是默认快捷键:
-
H
根据你的当前状态,开始、显示、隐藏或按住以清除路径。
-
/retrace sethere
将当前位置标记为目的地。
-
/retrace set <x> <y> <z>
通过坐标设置特定目的地。
-
/retrace toggle
根据你的当前状态,启动或切换路径的可见性。
-
/retrace show
强制使路径变为可见。
-
/retrace hide
隐藏路径但不清除它。
-
/retrace clear
清除当前路径和目的地。
-
/retrace status
显示当前路径状态,包括引导是否处于激活状态。
-
/retrace config open
打开完整的配置界面。
ReTrace 适合哪些玩家
ReTrace 特别适合以下玩家:
- 沉浸于探索而忘记归途的玩家
- 建造大型或多层基地的玩家
- 花费大量时间在地下、森林或复杂地形中的玩家
- 希望获得沉浸式而非“地图式”指引的玩家
- 喜欢根据自己玩法微调路径工具的玩家
如果你曾经说过“我知道我的基地就在那边”,然后花了二十分钟迷路徘徊,那么 ReTrace 就是为你打造的。
TL;DR(简而言之)
ReTrace 会学习你实际走过的路径,并将其转化为一条智能、可自定义的回家之路。
ReTrace
Fully client-sided.
ReTrace turns your own movement into a living breadcrumb trail back home. Instead of guessing a straight line through mountains, caves, walls, and builds, it remembers the route you actually traveled and guides you back with clean wireframes or vibrant floating orbs.
Whether you are exploring a cave network, pushing farther from base than you meant to, threading through portals, or trying to recover your way out of a giant build, ReTrace gives you a return path that feels readable, reliable, and satisfying to follow.
Why ReTrace Stands Out
- Remembers the route you really walked instead of drawing a fake shortcut.
- Helps even before a full path exists by switching to beacon-style guidance.
- Handles portal and teleport-style route breaks with special gap guidance.
- Lets you choose between atmospheric fancy orb trails and clean wireframe visuals.
- Gives you a full in-game config screen with deep visual and behavior controls.
- Keeps the experience readable, smooth, and easy to trust during long sessions.
Quick Start
Default keybind: H
- Press
H to start ReTrace at your current location and begin learning your route.
- Press
H again to reveal or hide the route while you explore.
- Hold
H to clear the current route and destination and start fresh.
- If you want to mark a specific location instead of your current one, use
/retrace sethere or /retrace set <x> <y> <z>.
- Open the full config menu with
/retrace config open.
ReTrace starts in Simple Mode by default, so it can quietly begin learning your path and then reveal it when you want it.
Route Memory That Learns Your World
ReTrace records the path you actually take through the world and turns it into a reusable route. That means your way home follows your tunnels, turns, staircases, bridges, rooftops, cave entrances, and base hallways instead of pretending the world is flat and obstacle-free.
This makes a huge difference in places where normal waypoint mods stop being helpful:
- cave systems with overlapping levels
- forests and mountains with poor sightlines
- sprawling bases with layered paths
- improvised exploration routes that are hard to remember later
The result is guidance that feels familiar, because it is based on where you really went.
Smart Return Guidance
Once ReTrace has enough route memory, it solves a path back to your destination and presents it as a clean trail of nodes and connectors.
That trail is built to be easy to follow at a glance:
- breadcrumbs are spaced for readability instead of clutter
- the next important node is emphasized
- the destination marker is clearly distinguished
- guidance can auto-stop when you reach your destination
It feels like your world quietly drew a path home for you.
Beacon Fallback When No Route Exists Yet
ReTrace still helps even before it has a learned route.
If you set a destination but have not recorded a usable path back to it yet, ReTrace switches into a beacon-style guidance mode. Instead of leaving you with nothing, it gives you a direct guidance chain toward the target so you can still orient yourself and start building route memory along the way.
This is especially useful when:
- you just marked a fresh destination
- you wandered too far before recording enough of a return path
- you are trying to reconnect to a known place from a new angle
Portal And Teleport Gap Guidance
ReTrace is built for the moments where routes stop being physically continuous.
When your path crosses a portal or another abrupt transition, ReTrace can detect that gap and guide you through it instead of leaving a confusing break in the trail. While you move through those transitions, it can show special guide markers that help you reconnect to the route on the other side.
That means fewer "the trail just ended" moments and more "I know exactly where to go next."
Fancy Orb Trails Or Classic Wireframes
ReTrace is not locked to one look.
You can use:
- Fancy Mode for glowing XP-style orbs with rich color and motion
- Wireframe Mode for crisp, minimal path readability
- Dual Render if you want both styles at the same time
Fancy Mode is especially satisfying when you want the route to feel alive instead of purely utilitarian. Breadcrumbs can feel like collectible trail lights, beacon paths stand out in warm guide colors, and the whole route becomes easier to read during fast movement.
If you prefer a cleaner technical look, wireframe mode gives you a precise breadcrumb path without visual noise.
Readable Feedback While You Move
ReTrace is designed to communicate clearly without getting in your way.
It includes:
- a HUD for active route status
- distance feedback for beacon guidance
- audio cues for route actions
- pickup-style feedback in fancy mode as you travel through breadcrumbs
- clear visual emphasis for important route points
The goal is simple: you should be able to feel when the route is helping without constantly stopping to study it.
Deep In-Game Customization
ReTrace is highly configurable, and you do not need to leave the game to tune it.
Open the config menu with:
/retrace config open
From there you can adjust major categories like:
- input behavior
- route recording sensitivity
- routing behavior
- rendering style
- fancy orb visuals
- HUD options
- solver behavior
That means you can dial ReTrace toward exactly the experience you want:
- subtle and minimal
- bright and cinematic
- precise and technical
- soft and readable for long exploration sessions
Useful Commands
ReTrace can be used almost entirely from gameplay flow, but commands are there when you want direct control.
The fastest way to use ReTrace is still the default keybind:
-
H
Start, reveal, hide, or hold-to-clear depending on your current state.
-
/retrace sethere
Mark your current position as the destination.
-
/retrace set <x> <y> <z>
Set a specific destination by coordinates.
-
/retrace toggle
Start or toggle route visibility depending on your current state.
-
/retrace show
Force the route to become visible.
-
/retrace hide
Hide the route without clearing it.
-
/retrace clear
Wipe the current route and destination.
-
/retrace status
Show the current route state, including whether guidance is active.
-
/retrace config open
Open the full config screen.
Who ReTrace Is For
ReTrace shines for players who:
- get absorbed in exploration and forget the way back
- build large or layered bases
- spend time underground, in forests, or in rough terrain
- want guidance that feels immersive instead of map-like
- like route tools they can fine-tune to their own playstyle
If you have ever said "I know my base is somewhere over there" and then lost twenty minutes wandering, ReTrace was made for you.
TL;DR
ReTrace learns the path you actually traveled and turns it into a smart, customizable trail home.
评论 0
登录后参与评分
还没有评论,来抢沙发吧