请阅读此内容
本模组目前处于非常早期的 Alpha/技术演示 阶段。不要期待功能完整或适合生存模式的体验。预期会有 Bug、崩溃、存档不稳定(跨模组版本之间)以及整体打磨不足的情况。一切皆有可能崩坏。
Satiscraftory 是什么?
正如你可能猜到的那样,Satiscraftory 是一款受游戏《Satisfactory》启发的工厂自动化模组。它是从零开始构建的,以支持庞大且横跨世界的工厂,让你通过解决物流挑战来开采和处理无限可再生的资源。
真正的工厂模组
就像在任何真正的工厂游戏中一样,每个工厂组件始终在世界范围内进行全局 Tick,并在其所在的区块完全卸载时继续生产资源。方块/方块实体仅作为渲染和提供交互性的抽象层,工厂的模拟运行完全独立于这些抽象层之外。
⚠️ 技术权衡 ⚠️
该模组完全在其自身的模拟层上运行,因此不依赖区块加载。这意味着:
- 有限的原版互操作性 - 除了容器外,工厂组件无法与红石、物品实体、漏斗、生物等进行交互。容器的功能类似于原版的箱子,可以用作 Satiscraftory 与原版的/其他模组之间的桥梁。
- 与其他科技模组的集成缺失 - 由于工厂的实际模拟是独立的,Satiscraftory 无法连接到任何其他科技模组的管道、电缆或机器。此外,如上所述,你可以使用容器作为桥梁,但这显然依赖于区块加载。以这种方式容器在一定程度上违背了该模组的初衷,但你想怎么做就怎么做吧。

入门指南
请参阅 wiki。
推荐模组
- Sodium: 当屏幕上显示大量工厂组件/传送带物品时,能大幅增加 FPS。在某些极端情况下,FPS 可以增加一倍以上。在我的测试中,使用 5000 个传送带物品(2500 条传送带),FPS 从 ~22 提升到了 ~48
- Spark: 对于查找性能瓶颈和查看系统资源使用情况极其有用。在报告性能问题时,如果你能提供 Spark 报告,也能极大地帮助排查过程
- Entity Culling: 有助于减少方块实体的剔除(尤其是针对传送带)
- FerriteCore & ModernFix: 内存优化以及其他方面的改进
- WorldEdit: 复制/粘贴工厂以创建压力测试,或加快重复性工厂的建设速度。未来(可能)Satiscraftory 会官方加入用于此类操作的功能。注意:可能与电力网格连接等功能无法按预期配合工作
额外性能说明
注意: 本节内容是在初始发布后不久撰写的——其中大部分内容仍然适用,但自发布以来情况可能已发生变化。欢迎自行测试并报告结果
Tick 延迟 (CPU 和网络)
当玩家附近加载的区块中有大量传送带时,TPS 会急剧下降。这不一定是关键问题,但在进行压力测试时应予以注意。这是由于发送如此多的同步数据包带来的网络开销所致,虽然数据包在一定程度上进行了批处理(150 条传送带线路,即 2400 条传送带),但拥有约 10 万条传送带仍足以导致系统崩溃。这在现实使用中不太可能接近正常用例,但最终可能会进一步优化。
当工厂像常规游玩中那样分散布置时,性能通常不成问题。这是在完全空旷的超平坦世界中放置 10 万条(未加载)传送带,且没有生物生成或其他任何干扰的情况下进行的测试:
FPS
渲染目前是模组最大的性能瓶颈。如上所述在推荐模组部分提到,即使使用了 Sodium,屏幕上显示的 5000 个移动物品(2500 条传送带)也会导致帧率降至 50 FPS 以下。
尽管屏幕上同时出现的 5000 个物品仍然超出了常规游玩体验的上限,但仍有巨大的改进空间——尤其是考虑到这还没有在屏幕上加载大量动画机器,而届时 FPS(帧率)问题只会更加严重。一旦 Flywheel 的 26.1.2 移植版最终确定,这个问题将在不久的将来得到修复。Flywheel 将允许 Satiscraftory 利用实例化渲染技术,希望能将 FPS 数值提升不少。
已知问题
- 侧向加载传送带会将物品放置在传送带起始位置,而非精确到对应的方块。这个“特性”未来可能会被完全移除,这也是它尚未修复的原因——请使用实际的合并器方块
- 传送带上的物品偶尔会出现轻微的视觉故障,通常发生在从一个传送带线路交接至下一个时
路线图
按大致顺序列出;内容可能会发生变化,小型补丁也可能穿插其中
- 0.7.0: 熔炉和构造函数取代通用的 Machine
- 0.8.0: 装配机(第一种多输入机器)以及更多需要装配机的物品,例如强化铁板
- 0.9.0: 流体、管道、取水器和燃煤发电厂。这是一个非常大的更新,其范围甚至可能超过 0.5.0。预计需要花费较长时间
- 其他: 期待来自 Satisfactory 的更多物品或较小功能(例如:刀片跑道、AWESOME Sink)。目标是充分完善 1 & 2 级进度系统,并包含一些 3 级元素,以使该模组被视为具备正式发布的条件。此外,太空电梯也将在未来推出……
- 未来: 在未来,我希望为模组添加更多 Minecraft 元素,而不仅仅是 1:1 复制 Satisfactory。例如,自动化常见的原版建筑方块、添加特定生物群系和维度特有的自定义资源,以及可能重新设计进度系统以利用更多原版内容。但这还很遥远,目前重点仍是打造一个功能完善的工厂游戏
参与贡献
需要帮助!
目前,该模组的瓶颈在于美术资源。我并非专业艺术家,但我尽力让事物不仅仅是枯燥的占位符。然而,在开发模组的同时还要处理所有美术工作是一项相当庞大的任务,极大地拖慢了开发速度
因此,如果你是艺术家、动画师或音效设计师,并且想要提供帮助,请加入 Discord 服务器 或直接联系我 (stasis_the_shattered)
反馈
让其他人进行压力测试、报告错误以及提供任何其他反馈都极具价值!请随时分享任何想法——无论是问题、功能请求,还是你喜欢的或不喜欢的内容,都可以。该模组仍处于早期阶段,因此我对各种意见持开放态度
报告问题
在报告逻辑(CPU、RAM)性能问题时,请包括:
- 工厂组件的确切总数,以及已加载区块中的数量。使用
/factory count和/factory loaded命令 - Spark 分析器的结果链接,并运行至少 30 秒以上。如果你的情况下无法使用 Spark,至少提供平均 TPS 和服务端玩家数。更多信息总是有帮助的
- (如有)CPU 规格、分配给 Minecraft 实例的 RAM 以及系统总 RAM
在报告渲染性能问题时,请包括:
- 正在渲染的工厂组件的大致数量,以及客户端已加载区块中的数量。使用
/factory rendered命令 - 工厂组件在屏幕上时的平均 FPS,以及在正常探索世界且无工厂组件时的平均 FPS
- 安装的任何显著的渲染模组,例如 Iris。如果使用光影,请注明光影包名称
- GPU 规格
致谢
部分资产(主要是模型和音效)是衍生自其他作品。更多信息,请参阅 GitHub 上的 ATTRIBUTIONS.md (GitHub)
READ THIS PLEASE
This mod is currently a very early alpha/technical demo. Do not expect a feature-complete or survival-friendly experience. Expect bugs, crashes, save instability (between mod versions), and general lack of polish. Things will break.
What is Satiscraftory?
Satiscraftory, as you might have guessed, is a factory automation mod inspired by the game Satisfactory. It is built from the ground up to support massive, world-spanning factories, allowing you to harvest and process infinitely renewable resources by solving logistical challenges.
A True Factory Mod
Like in any actual factory game, every factory component always ticks globally across the world and continues to produce resources, even when the chunks they are in are completely unloaded. Blocks/BlockEntities are only an abstraction for rendering and to provide interactibility, and the simulation of the factory runs entirely separate.
⚠️ Technical Tradeoffs ⚠️
This mod operates entirely on its own simulation layer so that it is not reliant on chunkloading. What this means is:
- Limited vanilla interoperability - With the exception of Containers, factory components cannot interact with redstone, item entities, hoppers, mobs, etc. Containers function like vanilla chests and can be used as a bridge between Satiscraftory and vanilla/other mods.
- No integration with other tech mods - Since the actual simulation of factories is self-contained, Satiscraftory cannot connect to pipes, cables, or machines from any other tech mods. Also, as mentioned above, you could use Containers as a bridge, but obviously this would be dependent on chunk loading. Using Containers in this way somewhat defeats the whole intent of the mod, but do whatever you want.

Getting Started
See the wiki.
Recommended Mods
- Sodium: Massively increases FPS with large amounts of factory components/belt items on screen. In some extreme cases, FPS can be more than doubled. In my testing with 5000 belt items (2500 belts), FPS went from ~22 to ~48
- Spark: Immensely useful for finding performance bottlenecks and viewing system resource usage. Also greatly helps in the process of reporting performance issues when you provide a Spark report
- Entity Culling: Helps a bit with block entity culling (most notably for belts)
- FerriteCore & ModernFix: Memory optimizations, among other things
- WorldEdit: Copy/Paste factories to create stress tests or make building repetitive factories faster. There will eventually (probably) be official features in Satiscraftory for these sorts of things later on. Note: may not work as expected with things like power grid connections
Additional Performance Notes
Note: This section was written shortly after initial release - most of it should still apply the same, but things may have changed since. Feel free to do your own testing and report results
Tick Lag (CPU & Networking)
TPS slows to a crawl when a massive amount of belts are in loaded chunks near a player. This is not necessarily a critical issue, but something that should be kept in mind when stress testing. This is due to the network overhead of sending so many sync packets, and while the packets are batched in some capacity (150 belt lines, which is 2400 belts), having around 100K belts is still enough to break it. This shouldn't realistically be anywhere close to normal use case, but may still be further optimized eventually.
When factories are spread apart, as you would normally do in a regular playthrough, performance shouldn't be much of a concern. This is a test with 100K (unloaded) belts in a completely empty superflat world with no mob spawning or anything else:
FPS
Rendering is easily the largest bottleneck of the mod right now. As mentioned above in the recommended mods section, 5000 moving items (2500 belts) on screen dropped to less than 50 FPS, even with Sodium.
While 5000 on-screen items is still pushing the upper bounds of what's normally expected in a playthrough, there is still massive room for improvement - especially considering that this is without having a ton of animated machines on screen, which will only worsen the FPS problem when that time comes. This will be fixed in the near future once Flywheel's 26.1.2 port is finalized. Flywheel will allow Satiscraftory to take advantage of instanced rendering and hopefully push those FPS numbers up a decent bit.
Known Issues
- Side-loading a belt puts the items onto the belt at the start of that belt lane, instead of the exact block. This "feature" will likely be entirely removed in the future, which is why it isn't fixed yet - use the actual Merger block
- Occasional minor visual glitches with belt items, most often when handing off from one belt line to the next
Roadmap
Listed approximately in order; things may change, and small patches may fall in between
- 0.7.0: Smelters and Constructors to replace generic Machine
- 0.8.0: Assemblers (the first multi-input machine) and more items that require the Assembler, such as reinforced iron plates
- 0.9.0: Fluids, pipes, Water Extractor, and Coal Plant. Very large update, maybe even larger in scope than 0.5.0. Expect it to take a while
- Other: Expect more items or smaller features from Satisfactory (e.g. Blade Runners, AWESOME Sink). The goal is to fully flesh out tier 1 & 2 progression, and have some elements of tier 3, for the mod to be considered ready for a full release. Also Space Elevator to come eventually...
- Future: In the future, I would like to add some more Minecraft elements to the mod, and not just copy Satisfactory 1:1. For example, automating common vanilla building blocks, adding biome-specific and dimension-specific custom resources, and maybe reworking progression a bit to utilize more vanilla stuff. But that's far away, and for now the focus is making a functional factory game
Get Involved
Help Needed!
Currently, the bottleneck of the mod is art. I am not an artist by any means, but I do what I can to make things not just boring placeholders. However, trying to develop the mod while also handling all of the art is quite a large task which slows down development tremendously
So, if you are an artist, animator, or sound designer, and you want to help out, please join the Discord server or message me directly (stasis_the_shattered)
Feedback
Having other people stress test their system, report bugs, and any other feedback is incredibly valuable! Please feel free to share any thoughts - whether it's an issue, feature request, something you like or don't like, whatever. This mod is still in its early stages so I'm open to pretty much anything
Reporting Issues
When reporting logical (CPU, RAM) performance issues, include:
- Exactly how many total factory components exist, and how many are in loaded chunks. Use the
/factory countand/factory loadedcommands - Link to results of a Spark profiler and run it for at least 30+ seconds. If Spark is unavailable in your case, provide an average TPS and players on server as a bare minimum. More info is always helpful
- (If available) CPU specs, RAM dedicated to the Minecraft instance, and total system RAM
When reporting rendering performance issues, include:
- Approximately how many factory components are actively being rendered, and how many are in client-loaded chunks. Use the
/factory renderedcommand - Average FPS when the factory components are on screen, and average FPS you would have if you were normally going about your world with no factories on screen
- Any notable rendering mods installed, such as Iris. If using shaders, name the shader pack
- GPU specs
Credits
Some assets (mainly models and sounds) are derivatives of other works. For more information, see ATTRIBUTIONS.md on GitHub
下载 Satiscraftory
下载 Satiscraftory
下载 Satiscraftory
下载 Satiscraftory
下载 Satiscraftory
下载 Satiscraftory
下载 Satiscraftory
下载 Satiscraftory
下载 Satiscraftory
下载 Satiscraftory
传送带建造与平衡性调整
传送带的建造方式经过重新设计,使其在生存玩法中不再繁琐且更加平衡:
- 传送带现在支持 3 种不同的建造模式:单向(Lane)、反向(Lane Reversed)和单条(Single)。一条传送带通道是由最多 16 格长的连续传送带组成。这允许玩家使用建造枪一次性放置最多 16 格传送带。传送带会自动弯曲并倾斜以到达目标位置。如果传送带路径会穿过实心方块,则放置无效。
- 放置传送带的成本已大幅降低;整条通道(16 格传送带)将消耗全额成本,而单格传送带仅消耗 1/16 的成本,两格传送带消耗 2/16,依此类推。每种所需材料的最低成本始终为 1。例如:Mk. 2 传送带整条 16 格通道需要 6 个铁板和 12 个螺丝,而半条通道(8 格传送带)仅需 3 个铁板和 6 个螺丝。单格传送带仅需各消耗 1 个材料。
- 现在可以在建造枪处于“单向”或“反向”模式时,将整个传送带通道作为单个对象拆除。通道内的每格传送带都会高亮显示,点击通道内的任意一格传送带即可标记整个通道进行拆除。如果您仍希望只移除个别传送带,“单条”模式的操作方式与此更新前完全相同,但将根据建造成本的变更获得按比例的材料返还。
关于这个资源的讨论、问题反馈与使用心得
还没有讨论,来发第一帖吧
你是这个资源的作者?登录后可认领此资源。
相似资源
模组
一个用于收集生物掉落物的多区块模组。
模组
AE2:一款流行的自动化与存储模组
模组
基于 GTCEu 1.12.2 的现代 GregTech
模组
让你能够在世界中的任何位置定位结构。
模组
TerraFirmaCraft (TFC) 是一个全面转换模组,对生存模式进行了彻底的改造与重新设计。
模组
一堆修复
评论 0
登录后参与评分
还没有评论,来抢沙发吧