Sighte Addons
面向客户端的 Fabric 模组,用于 Hypixel SkyBlock Catacombs,回答 Hypixel 未提供的一个问题: 队伍中究竟是谁清理了哪些房间。
Hypixel 仅暴露队伍总计数据——秘密数量、死亡次数、清理百分比——而从不提供每位玩家的个人数据,仅在运行结束后的“额外统计”界面除外。然而,地牢物品地图会显示每个队伍成员的位置(即使超出渲染距离)以及每个房间的清理标记。通过每 tick 同时采样这两项数据,即可实现完整的个人归属追踪,无需队伍同步,也无需为你的队友安装任何内容。
功能特性
- 实时 HUD — 当前房间、你在其中停留的时间、清理完成时间、秘密探索计时器以及队伍排名。
- 按房间的秘密追踪 — 一个房间有多少个秘密、完成了多少个,以及其中有多少个可证实是你完成的。
- 秘密探索计时器 — 在房间第一个秘密(宝箱、拉杆、凋零精华、物品拾取)出现时开始计时,在最后一个秘密完成时停止。
- 可读的房间历史记录 —
/sa pbs。每行一个房间,两侧并排显示记录:直到房间被清理所花费的时间,以及秘密探索时间。支持类型芯片过滤,所有列均可排序,在任何位置输入文本即可搜索房间名称——无需输入框。点击某个房间可查看其详情:每次尝试的清理时间进度(以条形图表示)、个人最佳成绩(金色高亮),以及你每层和每种形状的最佳时间,加上来自房间数据库的秘密和地窖计数。 - 聊天摘要 — 房间清理时的单行提示,以及运行结束时的整体摘要。
Sighte F7 3:12.5 23 rooms
Water Board 0:41.2
cleared 02:58.6
secrets 0:08.6 4/6 (2 you)
8.50 Nordwand
6.00 Tanksalot
记录保存在 config/sighteaddons/history.jsonl 中,该文件为追加写入模式,每行一条,随你的游玩过程逐行生成。静音聊天公告绝不会导致记录丢失。
设置
/sa 打开设置界面,/sa pbs 直接跳转到历史记录。四个标签页——hud、chat、history、debug——点击某行即可切换;所有更改立即生效,因此无需担心忘记点击保存按钮。position · place 可将 HUD 放置在你下次点击的位置。
该界面仅由矩形和字体调用绘制——无小部件库,也无配置屏幕依赖,这也是为何本模组仅依赖 Fabric API 和 Fabric Language Kotlin 即可运行。
要求
- Minecraft 26.1.2,Fabric,仅限客户端(服务器端无法感知此模组)
- Fabric Loader 0.19.3 或更高版本,Java 25 或更高版本
- Fabric API 和 Fabric Language Kotlin
数据与隐私
默认情况下,此模组会上传数据。 当地牢运行结束——无论是正常完成还是提前退出——一份报告将通过 HTTPS 发送至模组的分析服务器:包括房间、耗时、队伍大小及存在的职业,归档于你本机生成的随机 ID 下。你的 Minecraft 用户名和 UUID 不包含在内,其他人的也不会包含。 可在
/sa→ debug → upload run reports 中关闭此功能。模组首次运行时会在聊天中提示一次。
这些报告是推导房间难度的依据——即每个房间的平均清理时间和秘密探索时间,基于多次运行的平均值计算,这是单个玩家的历史记录无法提供的信息。中途退出的运行同样计入:你实际清理过的房间依然有效,报告会如实标注“提前退出”,而非假装正常完成。
你的上传 ID 可在 /sa → debug 中查看。它是随机生成的,仅生成一次,并存储在 config.json 中。服务器上没有任何机制能将其还原为玩家身份——除非你自己决定改变:
除非你主动开启,否则不会发送你的名字。 /sa → debug → send my name 会将你自己的 Minecraft 用户名添加到报告中,因为排行榜需要一个标识,而这个标识由你提供。该行显示的是名字本身而非“on”字样,因此在点击前你可以清楚看到将离开你机器的内容。重新关闭后,新报告将不再署名,但你的历史记录保持完整。
队友永远不会被命名,无论方向如何。 运行报告包含队伍大小、职业和每房间总耗时——绝不含姓名,甚至匿名化处理也不存在。来自队伍查找器的四名陌生人无法通过他人的设置界面 consent,因此他们根本不在报告之中。
本地诊断日志 位于 config/sighteaddons/debug/,是一个独立的 JSONL 事件日志,用于调试真实运行,可在 DEBUG 标签页中切换。其中的所有人——队友和你自己——都以伪名形式出现,如 p-3f8a1c04,源自每次启动时新生成的随机盐值,且从未写入磁盘,因此在会话内稳定,但在下一次启动时不同。普通安装绝不会上传此日志: 仅当存在包含服务器 URL 和共享密钥的 config/sighteaddons/upload.properties 文件时,会话才会离开本机,而模组本身永远不会创建该文件。
致谢
房间检测使用了来自 Odin(BSD-3-Clause)的房间数据库和核心哈希算法。两种许可证均包含在 jar 包内。
Sighte Addons
Client-side Fabric mod for Hypixel SkyBlock Catacombs that answers a question Hypixel does not: who in the party actually cleared which rooms.
Hypixel only exposes party totals — secrets, deaths, cleared % — never per-player values, except on the end-of-run Extra Stats screen. The dungeon item map, however, shows every party member's position (even outside render distance) and every room's clear checkmark. Sampling both every tick gives full per-player attribution with no party sync and nothing to install for your teammates.
What you get
- Live HUD — current room, how long you have been in it, when it cleared, the secret run, and the party standings.
- Per-room secret tracking — how many secrets a room has, how many are done, and how many of them were provably yours.
- Secret-run stopwatch — starts on a room's first secret (chest, lever, wither essence, item pickup), stops on its last one.
- A room history you can actually read —
/sa pbs. One row per room with both records side by side: time in the room until it cleared, and the secret run. Type chips filter, every column sorts, and typing anywhere searches the room names — there is no input box. Click a room for its detail: the progression of its clear times as one bar per attempt, personal bests in gold, plus your best time per floor and the shape, secret and crypt counts from the room database. - Chat summaries — a per-room line as it clears and a run summary at the end.
Sighte F7 3:12.5 23 rooms
Water Board 0:41.2
cleared 02:58.6
secrets 0:08.6 4/6 (2 you)
8.50 Nordwand
6.00 Tanksalot
Records come out of config/sighteaddons/history.jsonl, which is append-only and written per line as
you play. Silencing the chat announcements never costs you a record.
Settings
/sa opens the settings screen, /sa pbs jumps straight to the history. Four tabs — hud, chat,
history, debug — click a row to toggle it; every change is written immediately, so there is no save
button to forget. position · place puts the HUD wherever you next click.
The screen is drawn from rectangles and font calls only — no widget library and no config-screen dependency, which is why the mod ships with nothing but Fabric API and Fabric Language Kotlin.
Requirements
- Minecraft 26.1.2, Fabric, client only (the server never sees it)
- Fabric Loader 0.19.3 or newer, Java 25 or newer
- Fabric API and Fabric Language Kotlin
Data and privacy
This mod uploads by default. When a dungeon run ends — finished or left early — a report of it is sent over HTTPS to the mod's analysis server: rooms, times, party size and the classes present, filed under a random id generated on your machine. Your Minecraft name and UUID are not part of it, and nobody else's ever is. Switch it off in
/sa→ debug → upload run reports. The mod says this once in chat the first time it runs.
Those reports are what room difficulty is derived from — how long each room takes to clear and how long its secrets take, averaged per room across many runs, which is something no single player's history can tell you. A run you walk out of counts too: the rooms you did clear are just as real, and the report says it was left early rather than pretending otherwise.
Your upload id is shown in /sa → debug. It is random, generated once, and stored in
config.json. Nothing on the server can turn it back into a player — until you decide otherwise:
Sending your name is off unless you switch it on. /sa → debug → send my name adds your own
Minecraft name to your reports, because a leaderboard needs a label and that label is yours to give.
The row shows the name itself rather than the word "on", so what would leave your machine is legible
before the click. Switching it back off stops naming new reports and leaves your history intact.
Teammates are never named, in either direction. A run report contains party size, classes and per-room time totals — never a name, not even pseudonymously. The four strangers from party finder cannot consent through somebody else's settings screen, so they are not in there at all.
The local diagnostic log in config/sighteaddons/debug/ is a separate thing: a JSONL event log
for debugging a real run, switchable in the DEBUG tab. Everyone in it — teammates and you — appears
as a pseudonym like p-3f8a1c04, derived from a random salt generated fresh every launch and never
written down, so it is stable within a session and different in the next one. It is never uploaded
by an ordinary install: sessions only leave the machine if a
config/sighteaddons/upload.properties file with a server URL and a shared secret exists, and the
mod never writes that file.
Credits
Room detection uses the room database and the core-hash algorithm from Odin (BSD-3-Clause). Both licenses ship inside the jar.
Source: github.com/Sighte/SighteAddons
下载 Sighte Addons
下载 Sighte Addons
下载 Sighte Addons
下载 Sighte Addons
下载 Sighte Addons
下载 Sighte Addons
下载 Sighte Addons
下载 Sighte Addons
下载 Sighte Addons
下载 Sighte Addons
每次单人通关的清晰得分、记录视图中的筛选与排序功能,以及对“有效个人最佳成绩”判定规则的收紧。适用于 Minecraft 26.1.2,Fabric,仅客户端。
清晰得分——每条单人记录现在都会为你显示 standings(排名)中代表通关的那一半数据(即按时间份额计算的房间权重之和,该值反映了楼层难度),以及带有秘密份额的排名数值。
- 在列表的元信息行、单次运行的摘要第一行,以及 Discord 帖子中以
clear score组件的形式展示。 - 没有分数的旧版单人文件会在加载时根据其房间数据计算分数,使用今天的权重。未通关任何房间的文件将保持无分数状态。
筛选与排序
- 单人列表:提供 all / f7 / m7 / 300 等筛选芯片及对应数量,每列均可通过表头进行排序。缺失值在两个方向上均排在最后,时间排序顺序为 300 先于 270,再于空值。
- 分割表格:提供 all / master / normal 筛选芯片。运行记录表格:提供 all / solo / party 筛选芯片。
- 按 Escape 键优先取消当前选中的芯片,然后关闭界面。
仅在独自游玩时计入有效 PB——只有当没有其他玩家在房间内停留一秒或以上时,该房间通关才算作个人最佳成绩;这一阈值与运行报告用于判断 playersInRoom 的标准相同。短暂路过不足一秒的玩家不算同伴。
- 秘密 PB 保留其原有规则:模组会识别这些秘密属于谁,且同伴的存在不影响秘密 PB 的记录。
- 所有组队运行的运行报告均原样输出,聊天中的通关提示仍然正常发送,
history.jsonl中的旧记录也保持原位不变。
构建
479 项测试 / 45 个类。
SHA256 8ff3dd90f1ff3d70d9c4e6fe743ae30fb6b71fc7cf30237717666b0145036639
关于这个资源的讨论、问题反馈与使用心得
还没有讨论,来发第一帖吧
你是这个资源的作者?登录后可认领此资源。
相似资源
模组
显示你正在注视的方块的信息。(适用于 Minecraft 1.16+ 的 Hwyla/Waila 分支)
模组
查看物品与配方
模组
在游戏画面角落显示附近世界地形、玩家、生物和实体的地图。可创建路径点,帮助你找到标记过的位置。
模组
使用 JavaScript 编辑配方、添加自定义物品、编写世界事件!
模组
AE2:一款流行的自动化与存储模组
模组
添加区块认领和玩家组队功能,并与 Xaero's Minimap 和 World Map 集成
评论 0
登录后参与评分
还没有评论,来抢沙发吧