智能优化
Smart Optimization 是一款用于 Minecraft 的自适应性能优化模组,它会根据你当前的帧率(FPS)自动调整你的图形设置。
该模组会持续监控性能,并根据游戏运行在配置的 FPS 阈值之上还是之下,动态应用或恢复图形设置。
这使你能够在大多数时候保持高质量的视觉效果,同时确保在性能大幅下降时依然拥有流畅的游戏体验。
⚠️ 此模组仍处于积极开发阶段。功能可能会发生变化,并且随着时间的推移将添加新的优化选项。
重要事项
更新间隔是指再次更改设置所需的时间。如果你不确定什么值最适合你的设备,那么本节内容会有所帮助。
如果你使用的是低端电脑或笔记本电脑,并且总是希望以高帧率游玩,我建议将更新间隔设置为较低的值,例如 30(秒)。
如果你希望获得稳定的帧率,即使你拥有不错的电脑或笔记本电脑,我也建议将更新间隔设置为较高的值,例如 300(秒 / 5 分钟)。
**你可以使用以下命令在聊天栏中编辑更新间隔:
/smartopt updatetime <seconds>**
注意:你输入的最小值为 20(秒),最大值为 600(秒 / 10 分钟)。
工作原理
Smart Optimization 会跟踪一段时间内的平均 FPS。
- 如果 FPS 低于低阈值,模组会逐渐降低对性能要求较高的设置。
- 如果 FPS 高于高阈值,模组会逐步恢复你的原始设置。
在进行任何更改之前,Smart Optimization 会保存你的原始配置,以便能够完全恢复到原来的状态。
优化措施会以受控的顺序逐步应用,以避免出现突兀的画面变化。
包含的优化项
根据配置情况,Smart Optimization 可以调整以下内容:
- 实体渲染距离
- 实体阴影
- 粒子效果
- 云层渲染
- 模拟距离
- 渲染距离
每个类别都可以单独启用或禁用。
命令
FPS 控制
设置优化启动时的 FPS 阈值:
/smartopt low <fps>
设置恢复设置时的 FPS 阈值:
/smartopt high <fps>
设置检查 FPS 的频率:
/smartopt updatetime <seconds>
配置系统
启用或禁用特定的优化项:
/smartopt configure <setting> <true/false>
可用设置:
- entitydistance
- entityshadows
- particles
- clouds
- simulationdistance
- renderdistance
示例:
/smartopt configure particles false
这将防止 Smart Optimization 修改粒子设置。
状态
查看所有当前设置:
/smartopt status
其中包括:
功能特性
- 自适应 FPS 监控
- 渐进式性能优化
- 自动恢复原始设置
- 完全可配置的优化系统
- 轻量级客户端设计
- 无永久性画面改变
适用人群
Smart Optimization 专为以下玩家设计:
- 在特定情况下遇到 FPS 下降的玩家
- 希望在不完全降低画质设置的情况下提升性能的玩家
- 在低端或中端电脑上玩游戏的玩家
- 使用整合包或大型世界的玩家
- 偏好自动优化而非手动调整的玩家
开发状态
此模组目前正处于积极开发阶段。
未来的更新中将添加更多功能、优化选项和配置控制。
Smart Optimization
Smart Optimization is an adaptive performance optimization mod for Minecraft that automatically adjusts your graphics settings based on your current FPS.
The mod continuously monitors performance and dynamically applies or restores graphical settings depending on whether your game is running below or above your configured FPS thresholds.
This allows you to keep high-quality visuals most of the time while still ensuring smooth gameplay during heavy performance drops.
⚠️ This mod is still in active development. Features may change, and new optimization options will be added over time.
Important stuff
The update time is the time it takes to change the settings again. If you're not sure what value is the best for your device, then this section would be helpful.
If you have a low-end PC or laptop and always want to play with a lot of FPS, I recommend setting the update time to a lower value like 30 (seconds)
If you want stable FPS, even if you have a good PC or laptop, I will recommend setting the update time to a higher value like 300 (seconds / 5 minutes).
**You can edit the update time in the chat with this command:
/smartopt updatetime <seconds>**
Note: The lowest value you can enter is 20 (seconds). The highest value you can enter is 600 (seconds / 10 minutes)
How it works
Smart Optimization tracks your average FPS over time.
- If FPS drops below the low threshold, the mod gradually reduces performance-heavy settings.
- If FPS rises above the high threshold, the mod restores your original settings step by step.
Before making any changes, Smart Optimization saves your original configuration so everything can be restored exactly as it was.
Optimizations are applied gradually in a controlled order to avoid sudden visual changes.
Optimizations include
Depending on configuration, Smart Optimization can adjust the following:
- Entity render distance
- Entity shadows
- Particle effects
- Cloud rendering
- Simulation distance
- Render distance
Each category can be individually enabled or disabled.
Commands
FPS control
Set the FPS threshold for when optimization starts:
/smartopt low <fps>
Set the FPS threshold for when settings are restored:
/smartopt high <fps>
Set how often FPS is checked:
/smartopt updatetime <seconds>
Configuration system
Enable or disable specific optimizations:
/smartopt configure <setting> <true/false>
Available settings:
- entitydistance
- entityshadows
- particles
- clouds
- simulationdistance
- renderdistance
Example:
/smartopt configure particles false
This prevents Smart Optimization from modifying particle settings.
Status
View all current settings:
/smartopt status
This includes:
- FPS thresholds
- Update interval
- Enabled optimization options
Features
- Adaptive FPS monitoring
- Gradual performance optimization
- Automatic restoration of original settings
- Fully configurable optimization system
- Lightweight client-side design
- No permanent visual changes
Who is this mod for?
Smart Optimization is designed for players who:
- experience FPS drops in specific situations
- want better performance without permanently lowering graphics settings
- play on low-end or mid-range PCs
- use modpacks or heavy worlds
- prefer automatic optimization instead of manual tweaking
Development status
This mod is currently in active development.
More features, optimization options, and configuration controls will be added in future updates.
评论 0
登录后参与评分
还没有评论,来抢沙发吧