模组功能
本模组向游戏中添加了多种特殊的漏斗,称为智能漏斗。智能漏斗专为物品分拣与过滤系统以及自动连续制作简单配方的场景而设计。智能漏斗并非标准 Minecraft 漏斗的替代品;事实上,当您将它们与普通漏斗及其他相关物品(如发射器)配合使用时,智能漏斗的效果最佳。如果您觉得大多数红石装置如同黑暗魔法一般难以理解,这些漏斗将为您节省大量时间与头发。
MC 1.12[.1/.2] 模组依赖(已测试)
- Minecraft 1.12、1.12.1 或 1.12.2
- Forge(适用于您 Minecraft 版本的发布版构建)
- 客户端与服务端均可使用
MC 1.11.2 模组依赖(已测试)
- Minecraft 1.11.2
- Forge(至少为 1.11.2-13.20.0.2255)
- 客户端与服务端均可使用
点击折叠框查看其他版本。
MC 1.8.9 模组依赖(已测试)
- Minecraft 1.8.9
- Forge(至少为 1.8.9-11.15.1.1722)
- 客户端与服务端均可使用
MC 1.8.0 模组依赖(已测试)
- Minecraft 1.8.0
- Forge(至少为 1.8-11.14.3.1450)
- 仅限客户端使用 - 请勿在服务端上使用
入门指南

虽然智能漏斗可以独立工作,但其功能大致可分为以下几类。本页其余部分是按这些类别组织的模组用户指南:可见部分为您提供物品的概览;折叠框内包含如何制作和使用每种物品的详细信息。
漏斗分类
- 存储型或“胖”漏斗(Storage or "Fatty" Hoppers):允许您在单个漏斗中存储相当于一个箱子容量的物品槽位。
- 打包漏斗(Packing Hoppers):允许您自动将物品合成或拆解为存储块。
- 过滤漏斗(Filtering Hoppers):允许您定义哪些物品可以通过漏斗以及如何通过。
- 丢弃漏斗(Disposal Hoppers):允许您以高效且自动化的方式销毁不需要的物品。
- 回收漏斗(Recycling Hoppers):允许您回收部分已合成物品的原材料以供重复使用。
- 自动制作漏斗(Auto-crafting Hoppers):允许您自动化任何配方、任何数量的制作过程。
- 多功能漏斗(Variety Hoppers):允许您自动化一次性功能,如经验合并或方块破坏。
- 实验性漏斗(Experimental Hoppers):允许您尝试一些尚未完善智能漏斗创意。
智能漏斗的颜色故意与标准漏斗截然不同。这样您可以在任何错综复杂的漏斗链中轻松找到它们。以下是您将在模组中获得的所有漏斗样本,展现出其古怪的彩虹色怪异风格。

漏斗配置
智能漏斗控制槽位示例。
任何智能漏斗的核心都是其库存 控制槽位。当您激活或右键点击已放置的漏斗时,弹出的窗口中可以看到这些槽位。对于普通漏斗,这些槽位只是常规的物品库存槽位;而对于智能漏斗,除了常规的库存槽位外,还有一些被称为控制槽位的新类型槽位。控制槽位定义了漏斗的具体行为。 如果您不对某些智能漏斗进行配置,它们的行为将类似于普通漏斗;但大多数智能漏斗在直到您使用控制槽位指示它们执行特定智能操作之前,表现得相当“愚钝”。
超越漏斗

除了漏斗本身之外,Smart Hoppers 模组还包含多种用于配合漏斗使用或独立使用的实用物品。这些物品大多是简单的单一用途物品,但有些(如合成台)拥有自己的“智能”功能。
- 线型合成台:是一种合成“工作站”合成台,可直接接入批量存储系统。
- 漏斗塞:一种台阶状物品,放置在漏斗上以防止其吸入附近漂浮的物品。
- 槽塞:一种可禁用智能漏斗输入或输出槽的物品。
- 豪华合成台:一种在使用之间保存物品的合成台。
- 皮囊:游戏早期的物品,允许你在每个库存槽中携带几组物品。
- 通用钥匙和玩家钥匙:可用于锁定箱子、潜影盒和发射器等物品。
- 钱包和保险箱:让你可以将珍贵物品存放在只有你能打开的容器中。
- 经验食物:允许你像储存和消耗食物或饮料一样储存并随后消耗经验值。
漏斗外壳
所有智能漏斗均由一种名为漏斗外壳的物品制作而成。外壳代表了所有智能漏斗的共同部分,最终的智能漏斗始终是外壳与该漏斗特有的其他物品组合而成的产物。漏斗外壳比普通漏斗稍微耗费更多资源——除了五个铁锭和一个箱子外,还需要一个比较器和一块红石。请注意,你不能将漏斗外壳放置为方块;它仅用于制作实际的智能漏斗。
所有智能漏斗的基础。
铁丝网
为了减少制造大量智能漏斗所需的额外铁(例如为排序系统制造一排过滤漏斗),模组中包含了一种名为铁丝网(或简称网)的物品。你可以用铁条制作网,并在制作不同类型的过滤漏斗时使用网代替铁锭或铁条。
一根铁条可以制作4片网。
槽塞
许多智能漏斗包含超过典型的五个(5)个漏斗流通槽,这可能导致物品排序系统中“丢失”或浪费的物品问题更加严重。你可以通过在想要消失的槽位中放置一种名为塞子的特殊模组物品来有效地删除智能漏斗的一个槽。塞子仅适用于智能漏斗;如果你将它们放在原版漏斗中,它们会像其他物品一样流过。你不能在智能漏斗的控制槽中放置槽塞。
制作槽塞需要铁条和粘液球!
存储漏斗
+
普通型和重型或“积极型”脂肪漏斗物品。
肥厚漏斗可以返还你在合成漏斗时失去的箱子物品栏槽位;每个肥厚漏斗都拥有至少 27 个槽位,相当于一个小箱子的容量。使用肥厚漏斗可以将一个漏斗和一个普通箱子合并到一个方块的空间内。由于它们能容纳大量物品,你可以将肥厚漏斗用作半自动作物农场(短时间内产生大量物品)中水动力物品传输系统的收集漏斗。
重型或“急切”型肥厚漏斗在相同时间内消耗的物品数量是普通漏斗的 2-3 倍;加上其更大的存储容量,这意味着即使是在非常大的农场中,你也不会因为物品消失而丢失任何物品。如果你将一个急切型漏斗连接到箱子上,它也会以更快的速度将物品推入该箱子。
漏斗合成配方
由外壳和 2 个箱子合成的肥厚漏斗。
“急切”特性需要一块红石块!
如何使用肥厚漏斗(GUI)
肥厚漏斗是普通的物品容器,其物品栏大小等同于单个箱子;它们的界面中没有其他控制选项或特殊槽位。重型肥厚漏斗的物品栏着色与普通或基础肥厚漏斗不同,以便你在放置时区分它们。所有肥厚漏斗的颜色都比普通漏斗深得多,这样你可以在混合漏斗链中快速发现它们。
获得更多存储槽位,...
以及更快的物品抽取速率!
测试物品吸取速率
为了检查急切型肥厚漏斗比普通漏斗快多少,你可以按照下图设置一个急切型漏斗、一个普通漏斗、两个带锁箱子和两个普通箱子。右侧较暗的漏斗是急切型漏斗。然后将四 (4) 组任意方块放入上方的大型带锁箱子中并关闭它。几秒钟后,所有物品都会被两个漏斗抽走;然而,肥厚漏斗应该已经推入了大约 2.5 组物品到箱子中,而普通漏斗只推入了大约 1.5 组。如果使用急切++型漏斗,差异会更大。

推荐的搭配物品
- 线性工作台:快速从工作台的输出槽中提取物品(避免玩家等待)
- T型过滤漏斗:分支物品管线
- 作为分拣系统中的最后一个漏斗,位于溢出箱子或丢弃漏斗之前(缓冲区)
贾巴漏斗
贾巴漏斗是一种容量更大的急切型肥厚漏斗(3倍),并且它以比急切型漏斗更快的速率吸取更多物品。当你需要在许多高流量漏斗线路交汇点拥有非常大的缓冲区时使用它。
打包漏斗
+
+
打包漏斗、解包漏斗和包装漏斗物品。
这组漏斗帮助你自动创建和解构存储方块,如煤块、红石块和黏液块。打包漏斗在自动物品存储系统中非常有用,因为它们允许你将物品的方块形式存储在隐藏的次要溢出箱子中,而主箱子则存放常规物品。通过在典型的存储系统单元中使用打包漏斗和解包漏斗替换两个普通漏斗,你可以将该单元的容量提高 4-9 倍。
漏斗合成配方
由外壳、沙块和箱子合成的包装漏斗。
由外壳、水桶和箱子合成的解包漏斗。
重型解包漏斗增加了更多输出槽位。
如何使用打包漏斗(GUI)
对于打包漏斗,你需要选择一个打包配方,该配方描述了要打包的物品或方块的类型和具体数量。通过将样本输入物品放置在漏斗的实心绿色控制槽中,可以选择特定的配方。
打包漏斗的 GUI。
如何知道你已经选择了打包配方?直到漏斗识别出该物品组合为有效的打包配方
, 其主标题将显示为紫色;当你拥有有效组合时,标题会变为正常的深灰色。
定义为打包西瓜块。
打包器配方与普通合成配方不同,必须由模组预先注册,这样漏斗才能将输入匹配到特定的输出。不过,你不必等待模组集成 Smart-Hoppers 即可使用打包器——所有原版 Minecraft 存储方块/物品的配方都会自动注册为打包器配方。此外,还有一个配置选项可以启用:让 SmartHoppers 在启动时扫描配方注册表,以自动从其他模组中筛选出适合打包的配方(详情请见下文)。
已预注册的配方。
对于自动化打包,请确保五个(5)个绿色输入槽由绿色控制槽中定义的物品进行供给。打包器只有一个输出槽,用于收集打包后的物品。如果打包漏斗指向另一个容器(箱子、发射器、漏斗等),它会自动尝试将打包好的物品推入该容器。如果打包漏斗下方有一个漏斗,它将仅从输出槽中提取物品。
正在工作的打包器!
某些打包器配方包含两种不同类型的物品:一种主物品和一种我们称为包装材料或绑定物品的次级物品。打包器期望每 N 个主物品(通常是 4、6 或 8 个),就消耗一个包装材料。要选择其中一种配方,你需要在实心蓝色控制槽中放入少量包装材料作为样本。
定义为使用两种物品进行打包。
对于自动化打包,请确保蓝色输入槽由蓝色控制槽中定义的物品进行供给。请注意,蓝色输入槽只能从上方供给,而绿色输入槽可以从一个或多个侧面供给。
正在工作的打包器!
如何使用拆包漏斗……与打包器类似……但又有所不同
设置拆包器的方法与打包器相同;拆包器只是对你选择的打包器配方执行自动“撤销”操作。最大的区别在于,拆包器的输入将是打包器定义时的同一配方的输出。例如,上面展示的西瓜块打包器示例中,拆包器会期望接收西瓜块作为输入,并将其拆包为 9 片西瓜作为其自身的输出。
拆包器的 GUI。
定义为拆解西瓜块。
由于拆包器可以快速产生大量物品,你可以使用大型重型拆包器将漏斗自身的输出存储增加到 24 个槽位,以便在拆包器连接到普通漏斗或箱子时提供一个良好的缓冲。这两种类型的拆包器都是无损的,这意味着除非输出槽中有空间容纳所有结果物品,否则它们不会拆解存储方块。
正在工作的重型拆包器!
自动注册打包器配方
所有标准的 Minecraft 存储物品和方块的合成配方都已预注册为打包器配方。在 v4 之前,这些内置配方仅包含那些可以在一种形式(未打包)和另一种形式(已打包)之间以及反过来转换的物品。因此,例如,并没有自动定义将线打包成羊毛块或将石英打包成石英块的配方,因为这些在原版 Minecraft 中是不可逆的。从 v4 和 Minecraft 1.12 开始,这条一般规则有几个例外;现在你可以打包线和红石粉等物品。

如果内置配方不包括你想要制作的存储方块,你也可以要求 Smart-Hoppers 检查所有已注册的综合配方,包括模组配方,看看是否有任何配方可以成为有效的打包器配方并自动将其注册为此类。要使配方有效,它必须符合原版方块的简单存储方块模式。要启用此选项,请在安装 Smart-Hoppers 的情况下至少运行一次 Minecraft,退出后编辑 Smart-Hoppers 的配置文件,如下所示针对服务器;对于单人游戏,只需使用模组的配置 GUI 界面即可。
"c recipes" {
# Set to true to enable auto-discovery of packer recipes.
B:auto_discover_storage_blocks=true
}
如果你的存储方块配方需要两种物品或不符合简单的存储方块配方模式,拥有该配方的模组必须通过 Smart-Hoppers API 注册自定义打包器配方。
一个由模组注册的自定义打包器配方。
包装制作器
包装漏斗是一种简化的自动合成器,旨在与打包机配合使用,用于批量合成的装配线。你可以使用包装制作器大量生产打包配方所需的包装或绑定材料,以确保你的打包漏斗不会因缺少此必需物品而中断生产线。
漏斗合成配方
合成一个包装漏斗。
如何使用包装漏斗(GUI)
与打包机和拆包机一样,你需要通过将配方物品的样本放入漏斗的控制槽中,来告诉包装制作器生产什么。适用于两物品配方的打包机的所有限制条件同样适用于此处。在最简单的设置中,你会将包装漏斗连接到打包漏斗的蓝色输入槽上。
包装制作器的图形用户界面。
包装漏斗拥有较大的输出库存容量,最多可容纳其产出物品的 18 组。通常,你会提供足够的原料物品,以确保包装漏斗的库存达到满容量,从而使你的打包机几乎永远不会耗尽所需物品。
自定义包装配方。
原版用途
可以使用包装制作器来创建一些简单的原版物品,如纸张、线、玻璃瓶和骨粉。但通常情况下,包装配方是由第三方模组定义的,这些模组会与 Smart-Hoppers 集成,以注册它们的多物品打包配方。
指令“卡片”

许多智能漏斗允许你在控制槽中放入一种名为指令卡的特殊物品。指令卡是一种便捷的方式,用于标识(通常规模较大且种类繁杂)智能漏斗需要以某种方式进行识别或管理的一批物品。目前共有三种指令卡:过滤列表卡、配方卡以及漏斗命令卡。过滤列表卡可以定义一组被漏斗拦截的物品,也可以定义一组允许漏斗通过的物品。配方卡始终为选定的 Minecraft 配方版本定义特定的物品组合。命令卡会改变漏斗的核心行为,但目前仅有少数漏斗支持接受此类卡片。卡片的具体解读方式最终取决于使用它的特定漏斗。

你可能在智能漏斗中使用的通用过滤列表(左)和配方卡(右)示例。当过滤列表与处理漏斗和回收漏斗配合使用时,我们称它们为保留列表,因为它们指示了漏斗应放行或保持原样的物品。
纳米鸡养殖场处理漏斗的“保留列表”示例。
指令印章合成配方
你可以通过将选定物品的信息“盖印”到一张纸上来制作指令卡,这一过程需要使用一种特殊的合成台——插槽卡合成台。首先,你需要制作想要使用的特定类型的印章。尽管只有两种基本的卡片类型,但我们提供了多种不同的印章,以帮助你创建有用的工具提示,从而在卡片制作完成后识别卡片上包含的内容(所有指令卡看起来都类似于一张纸,因此额外的工具提示信息非常有用)。
制作一套印章空白版。任何原木或羊毛方块均可使用。
一旦你获得了一套印章空白版,你就可以制作与你预期指令相匹配的特定类型印章。你不能直接使用印章空白版来制作指令卡;你必须指定卡片上的信息所描述的内容,因为这能让合成台确定如何向智能漏斗描述这些物品,从而尽可能准确地匹配你的选择标准。
制作一组“过滤为:”印章。你可以使用铁丝网代替铁栏杆。
制作一组“配方原料”印章。任何“食物面包”类物品均可。
为丢弃漏斗制作一组“保留物品:”印章。任何树苗均可。
最后,制作插槽卡工作台以创建自定义指令卡。
如何使用插槽卡工作台(GUI)
将您希望包含在指令卡中的物品放入“选择”3x3网格中。如果您正在制作配方卡,请确保通过查看显示当前放置物品匹配结果的预览物品来定义一个已知的合成配方,就像标准合成台一样。对于其他类型的卡片,这个配方预览槽其实并不重要。
空槽位卡片合成台的 GUI。
接下来,将与您要制作的卡片类型匹配的印章放入顶部的“印章”槽中,并将一张纸放入第二个槽(印章下方)。如果表格能够使用当前的物品组合生成有效的指令卡,它将生成卡片并将其放置在最底部的印章槽中(带有浅色卡片轮廓的那个),供您拾取。制作指令卡时,您不会失去选择物品;只有印章和纸张会被消耗用于制作卡片。
为多种树苗定义过滤列表。
您可以使用最右侧的三个“...”槽作为额外印章材料的存储,如上图所示。这些物品将在合成会话之间由表格保留。请注意,合成区域(“选择”和“印章”)上的物品会被弹出,就像标准合成台一样。
用于金粒和薯条的印花材料!
为丢弃漏斗定义保留列表。
通配符选项
若要创建描述具有子类型的物品(如多色方块)或可能受损的物品(如工具)的指令卡,您可以使用选项印章。选项印章允许您预先用“匹配任意”指令对纸张进行印花,以便插槽卡片合成台检测。
选项印章
要创建预先印有“匹配任意”指令的纸张,请创建一个选项印章并将其应用到普通纸张上。这两个操作均在普通合成台上完成。
从普通印章空白处制作通配符印章。
产出
预印纸张。
不幸的是,预印纸张看起来与普通纸张相同,因为它只是附带了一些特殊信息的纸张。为了帮助您追踪预印纸张,物品工具提示会如上所示更改。要创建过滤列表,只需将预印纸张放在通常放置普通纸张的位置,即可得到匹配任意的过滤列表。
产出 
接受指令卡的漏斗
如果智能漏斗在控制槽中接受指令卡,则该槽的四个角会用黄色边框高亮显示。如果控制槽仅接受指令卡,其背景将包含如下所示的卡片符号。
接受指令卡或漏斗定义的其他物品。
仅接受指令卡。
每张卡片超过九个物品
插槽卡片合成器的 3x3 “选择”网格允许您最多选择九 (9) 个物品以包含在指令卡中。对于配方卡来说,这种限制是可以接受的,因为您无法从标准 Minecraft 合成台中创建包含更多物品的配方。然而,对于过滤列表,您可能需要指定更多的物品。您可以通过组合较小的列表来创建更大的列表——最多可达 27 个底层物品(或单个箱子的槽位大小)。您可以在插槽卡片合成台上组合一次列表(即不能创建列表的列表的列表……)。您还可以使用命名列表来引用非常长的物品列表;有关命名列表的更多信息,请参阅“过滤漏斗”部分。
示例:合并两个砂岩物品的过滤列表
假设我们要创建一个过滤列表,允许我们最常一起使用的砂岩物品。该列表将至少包括五个来自黄砂岩组的物品,以及五个来自红砂岩组的物品。因为这至少是 10 个物品,所以我们需要创建一个组合过滤列表,因为基本的 3x3 “选择”网格只能容纳九个物品。以下步骤演示了一种制作组合过滤列表卡片的方法:
a: 为砂岩物品创建过滤列表。
b:为红砂岩物品创建过滤列表。
下一步是可选的,但强烈建议执行,因为这有助于回忆组合列表中包含的内容(组合列表的工具提示将显示内部列表的名称,而非其具体内容)。
c:使用铁砧为每个过滤列表赋予一个有用的名称。
要创建组合列表指令卡,你需要在合成台的槽位中使用较小的过滤列表卡片作为选定物品。请记住,放置在“选择”网格上的物品不会消失,因此你可以重复使用这些较小的列表来在其他时间创建其他组合。
d:创建组合过滤列表。
e:像往常一样使用新的指令卡。
记住选项印章
如果你希望在一张卡片上指定单个物品的所有变体,使用选项印章来创建“匹配任意”指令要比创建一堆部分列表容易得多。
漏斗过滤
+
+
过滤器漏斗、T型过滤器漏斗和 T1 型过滤器漏斗物品。
过滤漏斗允许你定义哪些物品可以通过漏斗,以及在多大程度上如何通过这些物品。过滤漏斗是最初的智能漏斗——它们是漏斗+比较器+红石+中继器+火把“单元”的一体化替代品,我们通常将其用于大多数物品过滤和排序系统。有三种类型的过滤漏斗:简单的过滤器漏斗、T 型过滤器漏斗和 T1 型过滤器漏斗。你选择的类型取决于你正在构建的排序系统类型。
过滤器漏斗
普通过滤器漏斗最为直接——如果物品符合其过滤条件,漏斗会允许它进入其库存的任何合适槽位,并且该物品的推送或拉取行为就像普通漏斗一样。过滤器漏斗不是主漏斗管道的一部分,但通常由主管道为其供料。
漏斗合成配方
使用外壳和插槽插件制作过滤漏斗。
如何使用过滤漏斗(图形用户界面)
通过将允许通过的样本物品放入控制槽,你可以控制过滤漏斗允许哪些物品进入其库存。若要允许多种类型的物品通过,请使用过滤列表(请参阅下方的“指令卡”部分)。若要允许任何物品通过,请保持控制槽为空。若要阻止任何物品通过,请使用空的过滤列表。
过滤器的默认图形用户界面;所有物品均被允许!
设置为仅允许橡树树苗。
只要指令卡定义了一个漏斗可以匹配的物品列表,你就可以在过滤漏斗的控制槽中使用任何种类的指令卡。这包括常规列表、复合列表、保留列表、通配符列表和命名列表。
允许任何标准树木的树苗通过。
命名列表
如果你正在使用此模组,那么你很可能还安装了其他一些扩展了标准物品选择的模组;例如,通过添加新的树种和树苗类型。若要筛选属于特定类别的所有物品,你可以在漏斗的控制槽中放置一个按名称过滤的列表(基于物品的Forge 注册名进行选择)。这种设置有助于在不创建过多特定过滤列表的情况下实现基本的类型分类。Smart Hoppers 还提供了一组特殊的预命名复合类别供你使用和扩展。其中一些复合类别包括:“动物掉落物”、“树木掉落物”、“农作物”、“矿石”、“种子”、“敌对生物掉落物”、“桶”等。
允许任何种类的树木树苗。
过多的插槽(浪费空间)!
过滤漏斗的库存容量几乎是普通漏斗的两倍。如果你希望限制管道中“卡住”且玩家无法访问的物品数量,这将是一个缺点。使用 Smart Hopper 插槽插件来封锁不需要的库存插槽。
设置为仅两个库存插槽!
常见用途
- 作为标准分拣系统中过滤单元的一体化替代品。
- 在鸡和牛的烹饪机中搭配使用丢弃漏斗,以清除羽毛等未使用的掉落物。
- 与插槽插件结合使用,创建容量更小的“普通”漏斗。
- 为溢出存储箱子添加基于类型的简单分类功能。
T型过滤漏斗
T型过滤漏斗可将进入的物品分为两组:匹配项和未匹配项。未匹配的物品会根据漏斗的放置方向被推出;例如,你可以将未匹配物品推送到物品分拣管道的下一个过滤器处。匹配的物品会放入一组输出槽中,这些槽必须由下方的另一个漏斗抽取,通常是另一个 T 型过滤漏斗或贪婪肥牛漏斗(Eager Fatty Hopper),尤其是在构建分支管道时。T 型过滤漏斗通常直接插入主漏斗管道中。
漏斗合成配方
使用外壳和滤网(也可以使用铁栏杆)合成 T 型过滤漏斗。
T 型过滤漏斗使用方法(图形用户界面)
定义 T 型过滤漏斗的方式与定义简单过滤漏斗相同——在控制槽中放入单个样本物品,或者更常见的是,对于多种类型的物品,放入一个过滤列表指令卡。如果物品符合过滤条件,它将被放入右侧的输出库存(四个槽位)供其他漏斗抽取;否则,物品将被放入左侧的未匹配库存(四个槽位),并根据漏斗指向的方向被推出。
未定义的 T 型过滤漏斗。
设置为过滤平滑石和圆石的配置。
为了演示过滤物品是如何被分离的,下面是一组示例物品,我们可以按照上述设置通过 T 型过滤漏斗。请注意,测试输入中包含匹配项和非匹配项。
上述过滤设置的示例测试输入。
当物品通过 T 型过滤漏斗时,它们会被分类到匹配或未匹配的库存中。泥土物品通常会被推送到管道中的下一个漏斗(在此演示中,测试漏斗没有连接任何漏斗或箱子,因此所有物品都停留在 T 型过滤漏斗的库存中)。
排队在各自库存中的物品。
即将完成。
现在所有匹配的物品(平滑石头和圆石)都位于正确的槽位中。这些物品会被下方另一个漏斗抽取,然后被送往其他分类系统或进行存储。所有未匹配的物品(泥土、红石、煤炭)则位于左侧槽位,等待被推送到下一个过滤漏斗。
常见用途
- 用于将单个输入物品源分支为两条并行管道。例如,如果你有一个从多个农场收集物品到公共存储区的水流收集与运输系统,你可以在水流进入分类系统的位置将其分支,以便各类物品能够并行分类。
- 使用多个 T-Filter 漏斗构建无需发射器的紧凑型多物品分类与存储系统。最顶端的 T-Filter 漏斗(作为物品管道的一部分)需要包含整列所有可能物品的过滤列表,这样不属于该列的物品就能继续通过管道进入下一个过滤器。
T1-Filter 漏斗
t1-filter 漏斗是 t-filter 漏斗的改进版,能够优雅地处理物品溢出情况。智能漏斗会将过滤列表中的每种物品限制在一个槽位内,因此当某种物品发生溢出时,其他类型物品的流动不会受到不利影响。t1-filter 漏斗通常直接插入主漏斗管道中。
漏斗合成配方
使用外壳和滤网(也可以使用铁栏杆)合成一个 t1-filter 漏斗。
如何使用 T1-Filter 漏斗(图形界面)
要使用 t1-filter 漏斗,你必须提供一张包含 最多 9 种物品的过滤列表指令卡。该漏斗会使用此列表来允许物品进入其库存,行为类似于 t-filter。t1-filter 的匹配物品库存非常大,允许你使用单个漏斗为单个箱子填充最多 9 种不同的物品(每种物品占用 3 个槽位)。

一个未定义的 t1-filter 漏斗。
最多支持 9 种不同的物品。
T1-Filter 与 T-Filter 的区别
以下是一张截图,展示了 t1-filter 旨在缓解的问题。在此示例中,t-filter 用于将怪物掉落物分类到一个垂直的多物品存储系统中,每个箱子包含两种或多种类型的物品。想象一列三个箱子,每个箱子由一个 t-filter 供料,确保其仅接收属于该箱子的物品。
如下所示,使用普通的 t-filter 时,如果漏斗列中有一项或多项物品溢出,积压的槽位最终会阻塞整个列中的所有物品槽位,即使那些在箱子中仍有空间的槽位也会被阻塞。t1-filter 可以防止这种情况发生,前提是下游管道保持畅通。
红石和萤石粉现在被积压的木棍和糖阻挡……
T1-filter 将木棍和糖的限制各设为一格,这样即使没有更多空间容纳糖或木棍,其他物品仍能继续流动。多余的木棍和糖会被放入未匹配的库存中,并沿过滤器管道向下推送(可能进入溢出仓或处理系统)。
处理漏斗
+
回收与处理漏斗物品。
处理漏斗让你能够以高效、自动化的方式销毁物品。它们在刷怪农场、大型采矿作业以及清除我们随时间积累的堆积如山的垃圾方面非常有用。相比熔岩池,安装和使用它们要安全得多,并且内置了安全机制,以防你误操作将珍贵的信标通过鼠标右键点击放入处理系统。
处理漏斗
默认情况下,纯处理漏斗按你预期的方式工作:你将物品导入漏斗,这些物品就会 *砰* 地消失!全局“始终保留”列表为稀有物品(如信标和金苹果)提供了安全保护,你可以调整此全局列表,或通过指令卡为每个漏斗设置独特的保留列表。
漏斗合成配方
使用外壳和岩浆桶合成处理漏斗。你也可以用仙人掌块代替岩浆桶。
如何使用处理漏斗(GUI)
丢弃漏斗无需任何额外配置即可销毁物品;通常它会消失你放入其输入库存的任何东西。丢弃漏斗有一组输出槽(最右侧三个),用于处理你定义的“始终保留”物品。如果其中一个要保留的物品被送入丢弃漏斗,它会被移动到输出槽中,以便通过管道输送到你指向丢弃漏斗的地方(通常是返回到你的分拣系统或到一个“哎呀”箱子)。
普通丢弃漏斗 GUI。
默认的全局保留列表包含我们认为足够稀有以至于玩家将其丢弃到丢弃漏斗中可能是错误的物品(如下界之星、信标、金苹果、宝石块、钻石马铠等)。完整列表在章节末尾显示,你可以通过更改模组的配置文件来扩展它。要为特定的丢弃漏斗添加保留物品,你可以创建一个保留列表指令卡并将其放入丢弃漏斗的控制槽中。请注意,你的保留列表是额外于全局列表的。
使用保留列表指令卡定义。
将“始终保留”物品移动到输出槽。
全局保留列表(默认)
所有丢弃漏斗和回收漏斗在销毁或回收任何送入它们的物品之前都会检查此列表。其中一些物品无法从全局列表中移除;许多是在模组的配置文件中定义的(你可以在那里移除或扩展列表)。
- 下界之星
- 信标
- 所有宝石、锭及其矿石和存储方块
- 金苹果(两种类型)
- 钻石马铠
- 图腾
- 海绵(湿的和干的)
- 恶魂之泪
- 末影箱
- 凋灵骷髅头颅
- 潜影贝壳
- 黏液块
- 煤炭块
- 斑点西瓜
- 金胡萝卜
回收漏斗
回收漏斗是一种特殊的丢弃漏斗;在销毁物品之前,它会对照一个回收配方列表进行检查,看看是否可以将物品还原为基础材料。例如,如果你回收一个漏斗,你可以获得两到三块铁。有许多原版物品的回收配方,模组也可以使用智能漏斗 API 注册自己的回收配方。
漏斗合成配方
合成一个回收漏斗。
重型回收漏斗增加了更多槽位!
如何使用回收漏斗(图形用户界面)
乍一看,回收漏斗似乎与丢弃漏斗工作方式相同。如果你没有放入任何可以回收的物品,它的表现就和纯丢弃漏斗完全一样——所有进入的物品都会被永久销毁。当你放入一个匹配回收配方的物品时,有趣的机制才真正开始。请确保将回收器配置为使回收出的材料反馈到你的分类系统中,或者流入足够大的溢出箱子系统中。
普通回收漏斗的图形用户界面(GUI)。
使用保留列表指令卡进行定义。
正在工作的回收漏斗!
示例 原版 回收配方
这里不是完整的回收配方列表,因为完整列表太长无法在此全部列出,但这个常见用途列表应该能让你了解配方是如何运作的。这些配方总是将精炼(或“成品”)物品转换为单个基础材料。你永远不会拿回制作输入物品所使用的全部(甚至大多数)材料;但总比没有好!你需要通过实验来发现哪些物品可以被回收以及它们会回收成什么基础材料。请记住,回收漏斗不会回收或销毁全局保留列表上的任何物品(见丢弃漏斗部分以获取默认列表);这些物品会被原封不动地移动到输出槽中。
- 桶(任意) -> 2 个铁锭
- 漏斗 -> 4 个铁锭
- 铁门 -> 2 个铁锭
- 普通铁轨 -> 2 个铁粒(如果可用!)
- 金轨 -> 1 个金锭
- 金剑(任意耐久) -> 3 个金粒
- 钻石胸甲(任意耐久) -> 1 个钻石
- 比较器 -> 1 个石英碎片
- 石英块 -> 3 个石英碎片
- 羊毛块(任意颜色) -> 3 个线
- 红石灯 -> 3 个萤石粉
- 1 个 TNT 方块 -> 3 个火药
- 石砖块(任意类型) -> 1 个平滑石头方块
- 铁砧(任意耐久) -> 2 个铁块
- 染色粘土块 -> 2 个黏土球
- 海晶砖块 -> 8 个海晶砂屑
使用重型回收漏斗
与普通漏斗相比,重型回收漏斗具有更大的输入和输出库存容量。除此之外,它在功能和配置方式上是完全相同的。
重型回收器的图形用户界面(GUI)。
如果你没有一个大型分类系统来将物品反馈回去,你可以使用重型回收漏斗。该漏斗更大的输出容量可以将更多类型的材料收集在一起,以便你手动取出。
如果你正在回收大量不可堆叠的物品,可以使用重型回收漏斗。该漏斗更大的输入容量有助于防止因单件物品占用槽位而导致漏斗堵塞。
最后,如果你从多个来源向漏斗供给物品,请使用重型回收器。同样,更大的输入和输出库存有助于防止漏斗输入端积压,进而可能影响到你的物品管道。
自动合成漏斗
+
轻型和重型自动合成漏斗物品。
通用型自动合成漏斗让你能够自动化特定单一配方的合成过程。它们对于商店和快速生产大量物品以供建筑项目使用非常有用。可以把它们想象成那些自动烹饪机(鸡、牛排等),但它们适用于任何配方,而不仅仅是农场生物的掉落物。
从技术上讲,许多智能漏斗都是自动合成器,因为它们自动化了各种物品的合成过程。这些漏斗的不同之处在于,只要你提供所有必需的输入物品,它们对能处理的配方和能产出的物品没有任何限制。
漏斗合成配方
合成 2x2 自动合成漏斗。
合成 3x3 自动合成漏斗。
如何使用自动合成漏斗(GUI)
你必须为自动合成漏斗提供一个有效的配方指令卡才能产出物品。在此之前,GUI 的主标签会以紫色显示,以提示漏斗未正确配置。有效的配方卡会显示产出物品的名称,并在工具提示中的“原料”列表旁显示“(+)”。阅读“指令卡”部分以了解如何创建配方卡。
未定义的 2x2 自动合成器的图形用户界面(GUI)。
对于 2x2 合成漏斗,有四个从其他来源输入的原料槽、三个用于输出成品的槽位,以及一个特殊的回收槽,用于捕获使用输入物品后留下的副产品。在原版 Minecraft 中,最常见的副产品是从使用牛奶或水等液体桶的配方中产生的空桶。这个回收输出槽的内容只能由智能处理漏斗或导管漏斗从下方抽取。当然,玩家也可以手动取出物品。
已定义有效的合成卡片。
通常,一个 2x2 自动合成器足以合成大多数配方——即使某些配方在普通合成桌上占据超过四个格子。由于智能漏斗会按类型合并原料,即使某个形状配方占据了超过 4 个合成桌格子,只要最多只有四种不同种类的原料,它就能在 2x2 自动合成器中正常工作。例如,一个在合成桌上占据八个格子的箱子,实际上在自动合成器中只占一个格子。当你确实拥有超过 4 种不同原料时,你可以使用重型自动合成漏斗,它允许多达 8 个不同的原料槽位。
未定义的“3x3”自动合成器的 GUI
包含超过 4 种不同原料的配方。
每种原料被分配到一个单独的槽位。
使用更大容量自动合成器的另一个原因是,如果你的配方产生多种副产品,或者产生的副产物不支持满堆叠(64 个)的物品。例如,你的配方会产生空桶和一些其他模组自定义容器物品。更大的自动合成器可以在其回收槽中处理多达三种不同的副产物。
一个产生大量空桶的配方!
注意事项
- 合成卡片反映的是配方的特定版本——即制作卡片时在合成网格中显示的确切配方。如果模组的配方支持替代材料(例如“任何种类的羊毛块”),该模组实际上会向 Minecraft 注册 N 种不同的配方版本;每种变体对应一个版本。当你创建卡片时,你是在选择其中一种特定的版本!
- 如果你的配方确实生成了副产物物品,这些物品可能会丢失。尽管自动合成器会尝试将此类物品捕获到其回收槽中,但如果没有任何可用槽位,它将丢弃该物品。
- 自动合成器是无损耗的,这意味着如果其输出库存中没有足够的空间来容纳所有成品,它将停止合成。
- 自动合成器的输出红石信号强度基于其所有槽位,包括回收槽。
其他类型的自动合成器
该模组包含几种专用的自动合成器。有关存储方块打包器和解包器自动合成器的信息,请阅读上述章节。其余的自动合成漏斗将在下方的折叠内容中描述。
漏斗合成配方
合成一个方块修饰漏斗。
如何使用方块修饰漏斗 (GUI)
要进行方块修饰,你需要选择一个修饰配方,该配方描述了要修饰的方块。通过将样品的输入物品放置在漏斗实心的绿色控制槽中,可以选择特定的配方。当漏斗识别输入与修饰配方匹配时,其标签会从紫色变为正常的深灰色。
未定义的方块修饰 GUI。
Smart Hopper 模组会自动预装所有原版方块修饰配方。因此,例如,你可以将平滑石头修饰为石砖方块,将闪长岩和花岗岩修饰为其抛光版本,将原木修饰为木板等。
定义为制作抛光闪长岩方块。
自动合成大量的下界砖块!
What This Mod Does
This mod adds several specialized hoppers called smart hoppers to the game. Smart hoppers are designed for use in item sorting and filter systems and for auto-crafting continuous batches of simple recipes. Smart hoppers are not a replacement for standard Minecraft hoppers; in fact, smart hoppers work best when you use them with regular hoppers and other related items like droppers. If most redstone contraptions seems like dark magic to you, these hoppers will be a great time-and-hair-saver.
MC 1.12[.1/.2] Mod Requirements (Tested)
- Minecraft 1.12, 1.12.1, or 1.12.2
- Forge (release build for your version of Minecraft)
- Client and Server use
MC 1.11.2 Mod Requirements (Tested)
- Minecraft 1.11.2
- Forge (at least 1.11.2-13.20.0.2255)
- Client and Server use
Click spoiler for other versions.
MC 1.8.9 Mod Requirements (Tested)
- Minecraft 1.8.9
- Forge (at least 1.8.9-11.15.1.1722)
- Client and Server use
MC 1.8.0 Mod Requirements (Tested)
- Minecraft 1.8.0
- Forge (at least 1.8-11.14.3.1450)
- Client-side use only - do NOT use on a server
Getting Started

While smart hoppers work independently, their capabilities are broken roughly into the categories below. The rest of this page is the user-guide for the mod organized by these categories: the visible sections give you the items' overview; the spoilers contain the details on how you craft and use each item.
Hopper Categories
- Storage or "Fatty" Hoppers: let you store a chest's worth of inventory slots in a hopper.
- Packing Hoppers: let you make and unmake storage blocks from items automatically.
- Filtering Hoppers: let you define what items can go through a hopper and how.
- Disposal Hoppers: let you destroy unwanted items in an efficient, automated way.
- Recycling Hoppers: let you reclaim some of a crafted item's raw materials for reuse.
- Auto-crafting Hoppers: let you automate the crafting of a recipe; any recipe, any amount.
- Variety Hoppers: let you automate a one-off function like xp-coalescing or block breaking.
- Experimental Hoppers: let you experiment with some half-baked smart hopper ideas.
Smart hoppers are colored very differently from standard hoppers intentionally. This is so you can find them easily in any convoluted hopper chain. Here is a sample of some of the hoppers you'll get with the mod in all their wacky rainbow color weirdness.

Hopper Configuration
Example of smart hopper control slots.
The heart of any smart hopper are its inventory control slots. You can see these slots in the pop-up window you get when you activate or right-click on a placed hopper. For a regular hopper, these slots are just regular item inventory slots; for smart hoppers, you get inventory slots as well as some new types of slots called control slots. Control slots define what a hopper will do exactly. A few of the smart hoppers will work like regular hoppers if you do not configure them; but most of them are pretty dumb until you use the control slots to tell them to do something smart.
Three Slots Types
Smart hopper inventory slots come in three flavors: input, output, and control. For some hoppers, a single slot can represent both input and output; for example, all of a fatty hopper's slots are both input and output slots as they can receive items (input) and dispense items (output) automatically. But for most smart hoppers, input slots are distinct from output slots and will only receive items pushed in from another source or manually placed by the player. Control slots are always separate from other slots and do not participate in any form of automated item flows; you must put and take items out of these slots manually always. Finally output slots, will only receive items generated by the hopper's processing and will most often (but not always) automatically push these items to the next hopper or inventory it points to.
Control Slots
Examples of control slots
You configure a smart hopper by putting different kinds of items into one or more of its control slots. A control slot is always colored differently from regular inventory slots, is almost always the first one or two slots (from the top-left of the window), and can contain a little background glyph as a hint for what you can put there. Each hopper's control slot is described in its specific section.
Input Slots
Examples of input slots
If a smart hopper includes input-only slots, they are indicated by special background glyphs that show where those slots are "fed" from. Just like a regular hopper, a smart hopper can be fed from one or more of its sides by another hopper, an inventory like a chest, or a redstone contraption like a dropper. Remember, input-only slots receive items only; these items will stay in the hopper's inventory until they are used by the hopper's processing.
Output Slots
Examples of output slots
Most hoppers use the standard inventory slot appearance for output slots. However some output slots either contain special items (for example by-products like empty containers from auto-crafting) or are not pushed and must be pulled explicitly by another hopper. Like special input slots, these output slots usually contain a special background glyph.
Beyond Hoppers

In addition to the hoppers themselves, the Smart Hoppers mod includes several utility items for use with the hoppers or on their own. These are mostly simple single-purpose items, but some like the crafting tables have their own "smart" features.
- Line Crafting Table: is a crafting "station" table you hook into a bulk storage system directly.
- Hopper Plug: is a slab you place on a hopper to prevent it from slurping nearby floating items.
- Slot Plug: is an item that deactivates a smart hopper input or output slot.
- Deluxe Crafting Table: is a crafting table that stores items between uses.
- Pouches: early game item that lets you carry a few stacks per inventory slot.
- Generic and Player Keys: let you lock items like chests, shulker boxes, and dispensers.
- Wallets and LockBoxes: let you stash your preciouses in containers only you can open.
- Xp Food: lets you store and later consume xp like you would food or drink.
Hopper Shells
All of the smart hoppers are crafted from an item called a hopper shell. The shell represents the common bits of all smart hoppers and the final smart hopper is always a shell combined with other items unique to that hopper. A hopper shell is a little bit more resource expensive than a regular hopper -- it requires a comparator and block of redstone in addition to five iron ingots and a chest. Note that you cannot place a hopper shell as a block; it is only useful for crafting the actual smart hopper.
The foundation of all smart hoppers.
Iron Mesh
To reduce the additional iron needed to create a lot of smart hoppers (for instance a line of filtering hoppers for a sorting system), the mod includes an item, iron mesh or just mesh. You create mesh from iron bars and combine it, instead of iron ingots or iron bars, to craft the different types of filtering hoppers.
An iron bar crafts to 4 pieces of mesh.
Slot Plugs
Many of the smart hoppers include more than the typical five (5) hopper flow-through slots, making the issue of "lost" or wasted items in item sorting systems even worse potentially. You can effectively delete a smart hopper slot by placing a special mod item called a plug in the slot you want disappeared. Plugs work only with smart hoppers; if you place them in a vanilla hopper they'll just flow through like any other item. You cannot place a slot-plug in a smart hopper's control slot.
Crafting a slot-plug requires iron-bars and slime!
Storage Hoppers
+
Regular and heavy-duty or "eager" fatty hopper items.
Fatty hoppers give you back the chest inventory slots you lose crafting a hopper; they each have at least 27 slots like a small chest. Use a fatty hopper to combine a hopper and single chest into a one block space. Because they can hold a lot of items, you can use fatty hoppers as the collection hoppers in a water item transportation system for semi-automatic crop farms that produce lots of items in a short time.
The heavy-duty or "eager" fatty hoppers will consume up to 2-3 times the number of items in the same period as a regular hopper; this, plus their larger storage capacity means you're not going to lose any items to de-spawning even with very big farms. If you attach an eager hopper to a chest, it will push items into that chest at an increased rate as well.
Hopper Craft Recipes
A fatty hopper from a shell and 2 chests.
Eagerness requires a block of redstone!
How To Use Fatty Hoppers (GUI)
Fatty hoppers are plain item containers with inventories the size of a single chest; there are no other controls or special slots in their interfaces. The heavy-duty fatty hopper's inventory is shaded different from a regular or plain fatty hopper so you can tell the difference when they're placed. All of fatty hoppers are a much darker gray than regular hoppers so you can spot them quickly in a mixed hopper chain.
Get more slots of storage,...
and a faster item pull-rate!
Testing Item-Slurping Rates
To check how much faster an eager fatty hopper is versus a regular hopper, you can setup an eager hopper, a regular hopper, two trapped chests and two regular chests like shown below. The darker hopper to the right is the eager one. Then put four (4) stacks of any block into the large trapped chest on top and close it. In a few seconds all the items will be drained out by the two hoppers; however, the fatty hopper should have pushed about 2 1/2 stacks into the chest, while the regular hopper would have pushed about 1 1/2 stacks. Use an eager++ hopper and the difference is even greater.

Useful Items To Pair With
- Line-crafting table to pull items from the table's output slots quickly (so player doesn't wait)
- T-Filter hopper to branch an item pipeline
- As the final hopper in a sorting system before the overflow chests or disposal hopper (buffer zone)
Jabba The Hopper
The Jabba hopper is a much larger capacity eager fatty hopper (3x) and it pulls more items at a rate even quicker than the eager hopper. Use it when you need a very large buffer at an intersection point of many high-volumes hopper lines.
Packing Hoppers
+
+
Packer, un-packer, and packaging hopper items.
This trio of hoppers help you to automatically create and un-create storage blocks like coal blocks, redstone blocks, and slime blocks. Packing hoppers are useful in automatic item storage systems as they let you store the block form of an item in the unseen secondary overflow chests while the main chest contains the regular item. By using a packer and un-packer to replace two regular hoppers in a typical storage system unit you can increase that unit's capacity 4-9 times.
Hopper Craft Recipes
A packing hopper from a shell, sand block, and chest.
An unpacking hopper from a shell, water bucket, and chest.
A heavy-duty unpacking hopper adds more output slots.
How To Use Packer Hopper (GUI)
For packers you need to select a packer recipe which describes the type and specific number of items or blocks to be packed. You select a particular recipe by placing a sample of its input items in the hopper's solid green control slot.
A packer's GUI.
How will you know that you've selected a packer recipe? Until the hopper recognizes the item combination as a valid packer recipe
, its main title will show as purple; when you have a valid combination, the title turns to the normal dark gray.
Defined to pack melon blocks.
Packer recipes are different from your regular crafting recipes and they have to be pre-registered by mods for the hoppers to match your inputs to a specific output. However, you don't have to wait for mods to integrate with Smart-Hoppers to use packers-- all of the vanilla Minecraft storage block recipes are registered as packer recipes automatically. Plus there is a config option you can enable to have SmartHoppers scan the recipe registry at startup to automatically pick out packer-friendly recipes from other mods (read details below).
Pre-registered recipes.
For automated packing, make sure the five (5) green input slots are fed with the items defined in the green control slot. Packers have a single output slot that collects the packed items. If the packing hopper is pointing into a another inventory (a chest, dropper, hopper, etc.), it will automatically try to push the packed items to that inventory. If there is a hopper below a packing hopper, it will pull items only from the output slot.
A packer in action!
Some packer recipes contain two different types of items: a primary item, and a secondary item that we call the packaging or binding item. The packer expects for every N of the primary item (usually 4, 6, or 8), the packer recipe uses one of the packaging item. To select one of these recipes, you need to put a sample of the packaging item in the solid blue control slot.
Defined to pack using two items.
For automated packing, make sure the blue input slot is supplied with the item defined in the blue control slot. Note that the blue input slot is fed from above ONLY while the green input slots can be fed from one or more sides.
A packer in action!
How to Use Un-Packer Hopper...Same As Packer...Kind-of
You setup un-packers the same way as packers; the un-packer simply does an automatic "undo" of the packer recipe you select. The big difference is that the un-packer will expect as its input, the output of the same recipe when defined in a packer. So, for the melon block packer example shown above, an un-packer would expect to receive as inputs melon blocks which it would unpack into 9 melon slices as its own output.
An un-packer's GUI.
Defined to unpack melon blocks.
Because an un-packer can produce a lot of items quickly, you can use a large heavy-duty un-packer to increase the hopper's own output storage to 24 slots to get a nice buffer if the un-packer feeds into a regular hopper or chest. Both types of un-packers are lossless which means they will not unpack a storage block unless there is room for all of the resulting items in its output slots.
A heavy-duty un-packer in action!
Automatic Packer Recipe Registration
All of the standard Minecraft storage item and block crafting recipes are pre-registered as packer recipes. Before v4, these built-in recipes were composed of only those items that are convertible from one form (unpacked) to the other (packed) and back again. So for instance, there was no packer recipe defined automatically to pack string into wool blocks or quartz into quartz blocks as these are not reversible in vanilla Minecraft. As of v4 and Minecraft 1.12, there are several exceptions to this general guideline; now you can pack items like string and glowstone dust.

If the built-in recipes do not include the storage blocks you want to make, you can also ask Smart-Hoppers to check all of your registered crafting recipes, including mod recipes, to see if there are any that would make valid packer recipes and automatically register them as such. To be valid the recipe would have to conform to the simple storage block pattern of the vanilla blocks. To turn this option on, run Minecraft at least once with Smart-Hoppers installed, exit, and edit the Smart-Hopper's configuration file as highlighted below for servers; for single player just use the mod configuration GUI screens.
"c recipes" {
# Set to true to enable auto-discovery of packer recipes.
B:auto_discover_storage_blocks=true
}
If your storage block recipes require two items or just don't conform to the simple storage block recipe, the owning mod must register a custom packer recipe through the Smart-Hoppers API.
A custom mod-registered packer recipe.
Packaging Maker
The packaging hopper is a simplified auto-crafter designed to work with packers in a bulk-crafting assembly line. You use a packaging hopper to mass produce the packaging or binding ingredient for a packer recipe to ensure your packing hopper does not run out of this required item and stop the production line.
Hopper Craft Recipes
Crafting a packaging hopper.
How To Use Packaging Hopper (GUI)
As with the packer and un-packer, you tell a packaging hopper what to produce by putting a sample of its recipe items in the hopper's control slots. The same limitations that apply to a packer recipe with regards to two-item recipes, apply here. In the simplest setup, you would attach a packaging hopper to the blue input slot of the packing hopper.
A packaging maker's GUI.
A packaging hopper has a large output inventory capacity so it can hold up to 18 stacks of its produced item. Typically, you supply enough ingredient items to ensure the packaging hopper's inventory is filled to capacity so your packer(s) will rarely, if ever, run out of the required item.
Custom packaging recipe.
Vanilla Uses
It's possible to use a packaging maker to create a few simple vanilla items like paper, string, glass bottles, and bonemeal. In general though, packaging recipes are defined by third-party mods that integrate with Smart-Hoppers to register their multi-item packer recipes.
Instruction "Cards"

Many smart hoppers will let you put a special item called an instruction card in a control slot. An instruction card is a convenient way to identify a large(ish), usually heterogeneous, collection of items that a smart hopper needs to identify or manage in some way. Currently, there are three kinds of instruction cards: filter lists, recipe cards, and hopper command cards. Filter list cards can define a set of items the hopper blocks or they can define a set of items the hopper allows through. Recipe cards always define a specific combination of items for a selected version of a Minecraft recipe. Command cards change a hopper's core behavior and are accepted by only a few hoppers currently. How a card is interpreted is ultimately up to the specific hopper using it.

Example of a generic filtering list (left) and a recipe card (right) you might use with smart hoppers. When filter lists are used with disposal and recycling hoppers, we call them keep lists because they indicate what items the hopper should pass through or keep untouched.
A "keep list" for a nano-chicken farm's disposal hopper.
Instruction Stamps Craft Recipes
You create an instruction card by "stamping" the selected items' information unto a piece of paper using a special crafting table called a slot card crafting table. First you need to create the particular kind of stamp you want to use. Even though there are two basic kinds of cards, we provide several different stamps to help you create useful tool-tips to identify what is on a card once it's created (all instruction cards kinda look like pieces of paper so the additional tool-tip information is pretty useful).
Create a set of stamp blanks. Any log or wool block works.
Once you've got a set of stamp blanks, you can create the specific kind of stamp to match your intended instruction. You cannot use stamp blanks to create instruction cards; you must specify what the information on the card describes as this lets the crafting table determine how to describe the items to the smart hopper so it matches your selection criteria as accurately as possible.
Create a set of "Filter for:" stamps. You can use mesh instead of iron-bars.
Create a set of "Recipe ingredients" stamps. Any "foodBread" item works.
Create a set of "Keep items:" stamps for disposal hoppers. Any sapling works.
Finally, make the slot card crafting table to create your custom instruction cards.
How To Use Slot Card Crafting Table (GUI)
You put the items you want included on the instruction card into the "Selection" 3x3 grid. If you're creating a recipe card, make sure you define a known craft recipe by checking the result preview item that shows the current match for the items you've placed, just like a standard crafting table. For other types of cards, this recipe preview slot really doesn't matter.
Empty slot card crafting table's GUI.
Next, put the stamp that matches the type of card you're making into the top "Stamp" slot, and a piece of paper into the second slot (below the stamp). If the table can create a valid instruction card with the current combination of items, it will generate the card and place it in the bottom-most Stamp slot, the one with the light card outline, for you to pick up. You do not lose the selection items when you create an instruction card; only the stamp and the paper gets consumed for the card.
Defining a filter list for a variety of saplings.
You can use the three rightmost "..." slots for storage of extra stamp supplies as shown in the picture above. These items will be kept by the table between crafting sessions. Note that items on the crafting areas ('Selection' and 'Stamp') are ejected just like they are for a standard crafting table.
Stamping ingredients for nuggets and fries!
Defining a keep list for a disposal hopper.
Wildcard Option
To create an instruction card that describes items that have sub-types (like multi-colored blocks) or can take damage (like tools), you can use an Options stamp. The options stamp lets you create a piece of paper pre-stamped with a "match any" instruction for the slot card crafting table to detect.
Options Stamp
To create a pre-stamped "match any" piece of paper, create an Options stamp and apply it to a plain piece of paper. Both actions are done on a regular crafting table.
Crafting a wildcard stamp from a regular stamp blank.
Gives
Pre-stamped paper.
Unfortunately, pre-stamped paper looks like regular paper because it is just paper but with some special information attached to that particular instance. To help you keep track of your pre-stamped paper, the item tool-tip is changed as shown above. To create a filter list, just put the pre-stamped paper where you would normally put a plain piece of paper and you'll get a match-any filter list.
Gives 
Hoppers That Accept Instruction Cards
If a smart hopper accepts instruction cards in a control slot, that slot's four corners will be highlighted with a yellow border. If a control slot accepts only instruction cards, its background with contain a card glyph as shown below.
Accepts instruction card or other items as defined by the hopper.
Accepts only instruction cards.
Having More Than Nine Items Per Card
The slot card crafter's 3x3 "Selection" grid lets you select at most nine (9) items for inclusion on an instruction card. This limitation is fine for recipe cards as you cannot create a recipe with more items from a standard Minecraft crafting table. However, for filter lists, you might need to specify more items. You create larger lists by combining smaller lists -- up to a max of 27 underlying items (or a single chest's size of slots). You can combine lists once (i.e. you cannot create lists of lists of lists...) on the slot card crafting table. You can also use named lists to refer to very long lists of items; read the "Filtering Hoppers" section for more information on named lists.
Example: Merging two filter lists for Sandstone items
Lets say we want to create a filter list that allows the sandstone items we use together most frequently. This list will include at least five items from the yellow sandstone group, and five from the red sandstone group. Because that is at least 10 items, we need to create a combined filter list as the basic 3x3 "Selection" grid only holds nine items. The steps below demonstrate one way to make a combined filter list card:
a: Create filter list for sandstone items.
b: Create filter list for red sandstone items.
The next step is optional but highly recommended as it makes recalling what's on a combined list easier (the combined list's tool-tip list will show the names of the inner lists not their contents).
c: Use an anvil to give each filter list a useful name.
To create a combined list instruction card, you need to use the smaller filter list cards as the selected items on the slot crafting table for the new combined list. Remember you don't lose the items you put on the "Selection" grid, so you can reuse the smaller lists to create other combinations at another time.
d: Create the combined filter list.
e: Use the new instruction card as usual.
Remember Options Stamps
If you want to specify all the varieties of a single item on a card, it's much easier to use an Options stamp to create a "match any" instruction rather than create a bunch of partial lists.
Filtering Hoppers
+
+
Filter, T-Filter, and T1-Filter hopper items.
Filtering hoppers let you define what items should pass through a hopper and to varying degrees how those items pass through. Filtering hoppers are the original smart-hoppers-- they're an all-in-one replacement for the hopper + comparator + redstone + repeater + torch "unit" we use for most item filtering and sorting systems. There are three types of filtering hoppers: a simple Filter hopper, a T-Filter hopper, and a T1-Filter hopper. The one you choose depends on the type of sorting system you're constructing.
Filter Hopper
The plain filter hopper is the most straightforward-- if an item matches its filter criteria, the hopper allows it into its inventory, to any suitable slot, and the item is pushed or pulled just like a normal hopper behaves. A filter hopper is not part of your main hopper pipeline but is usually fed by it.
Hopper Craft Recipes
Crafting a filter hopper from a shell and slot-plug.
How To Use Filter Hopper (GUI)
You control what item a filter hopper allows into its inventory by putting a sample of the allowed item into its control slot. To allow more than one type of item, use a filter list (read the "Instruction Cards" section, see below). To allow any item to pass through, leave the control slot blank. To prevent any items from passing through, use an empty filter list.
A filter's default GUI; all items allowed!
Defined to allow only oak saplings.
You can use any kind of instruction card in a filtering hopper's control slot so long as the card defines a list of items that the hopper can match against. This includes regular lists, composite lists, keep lists, wildcard lists, and named lists.
Allows any standard tree saplings through.
Named Lists
If you're using this mod, chances are you've installed other mods some of which extend the selection of standard items; for instance, by adding new trees and sapling types. To filter for all items that belong to a particular category, you can put a by-name filter list (items are selected based on their Forge registry name) in the hopper's control slot. This setup is useful to get a basic level of type-sorting without having to create too many specific filter lists. Smart Hoppers also supplies a set of special pre-named composite categories for you to use and extend. Some of the composite categories include: "Animal Drops", "Tree Drops", "Crops", "Ores", "Seeds", "Hostile Drops", "Buckets", etc.
Allows any kind of tree sapling.
Too Many Slots (Of Waste)!
The filter hopper's inventory is almost twice as large as a regular hopper's. This is a bad thing if you want to limit the amount of items "stuck" in the pipeline and not accessible to the player. Use the Smart Hopper slot plug item to block off any unwanted inventory slots.
Set to just two inventory slots!
Common Uses
- As an all-in-one replacement for the filtering unit in a standard sorting system.
- Pair with a disposal hopper in chicken and cow cookers to be rid of unused drops like feathers.
- Combine with slot-plugs to create a smaller capacity "regular" hopper.
- To add a simple type-based organization to overflow storage chests.
T-Filter Hopper
The t-filter hopper lets you split the incoming items into two groups: matched and unmatched. The unmatched items are pushed by the hopper according to how you position it; so for instance, you could push the unmatched items further down the item sorting pipeline to the next filter. The matched items are put into a set of output slots that must be pulled from below by another hopper, usually another t-filter hopper or a eager fatty hopper if you're creating a branched pipeline. A t-filter hopper is usually inserted directly into your main hopper pipeline.
Hopper Craft Recipes
Crafting a t-filter hopper from a shell and mesh (you can also use iron bars).
How To Use T-Filter Hopper (GUI)
You define a t-filter the same way you define a simple filter hopper-- put either a single sample item into its control slot or more typically, for multiple types of items, a filter list instruction card. If an item matches the filter criteria it is put into the matched inventory (four slots to the right) to be pulled by another hopper, if not, the item is put into the unmatched inventory (four slots to the left) and pushed where-ever the hopper is pointed.
An undefined t-filter hopper.
Defined to filter for smooth and cobble stone.
To demonstrate how the filtered items are split, below is an example set of items that we can pass through a t-filter setup as above. Note that there are matching items and non-matching items in the test inputs.
Example test inputs for filter setup above.
As the items are passed through the t-filter, items are sorted into the matched or unmatched inventories. The dirt items would normally be pushed on to the next hopper in the pipeline (for this demonstration, there are no attached hoppers or chests to the test hopper so all the items sit in the t-filter's inventories).
Items queued in their inventories.
Close to done.
Now all of the matching items (smooth stone and cobble stone) are in the right slots. These would be drained by another hopper situated below this hopper and either sent off to another sorting system or stored. All of the unmatched items (dirt, redstone, coal) are in the left slots, waiting to be pushed on the next filtering hopper.
Common Uses
- Use to branch a single incoming item source into two parallel pipelines. For example, if you have a water collection and transport system that collects items from many farms into a common storage area, you can branch the water system at the point it enters your sorting system so categories of items can be sorted in parallel.
- Use several t-filter hoppers to create dropper-less, compact multi-item sorting and storage system. The topmost t-filter hopper (part of the item pipeline) needs a filter list of all the possible items for the entire column so that anything not belonging to that column continues through the pipeline to the next filter.
T1-Filter Hopper
The t1-filter hopper is a refinement of the t-filter hopper that lets you handle item overflow situations gracefully. The smart hopper will limit each item in the filter list to a single slot, so in the event of overflow of one item, the flow of other types of items is not adversely affected. A T1-Filter hopper is usually inserted directly into your main hopper pipeline.
Hopper Craft Recipes
Crafting a t1-filter hopper from a shell and mesh (you can also use iron bars).
How To Use T1-Filter Hopper (GUI)
To use a t1-filter hopper, you must supply a filter list instruction card that contains at most 9 items. The hopper uses this list to allow items into its inventory just like a t-filter. The t1-filter's matching items inventory is so large to allow you to use a single hopper to fill a single chest with up to 9 different items (3 slots per item type).

An undefined t1-filter hopper.
Allows up to 9 different items.
How T1-Filter Differs from T-Filter
Below is a screenshot of the problem the t1-filter is designed to alleviate. In this example, a t-filter is used to sort mob-drops into a vertical multi-item storage system where each chest contains two or more types of items. Imagine a column of three chests, with each chest fed by a t-filter that ensures it receives only items that belong to that chest.
As you see below, with a regular t-filter if there is an overflow of one or more of the items in the hopper column, the backed up slots will eventually block all of the item slots in the entire column, even the ones that do have space in their chests. A t1-filter prevents this from happening provided the downstream pipeline remains unclogged.
Redstone and glowstone dust now blocked by backed up sticks and sugar...
T1-filter limits sticks and sugar to one slot each so others can still flow even when there is no more room for sugar or sticks. The extra sticks and sugar are put in the unmatched inventory and pushed down the filter pipeline (perhaps to an overflow silo or disposal).
Disposal Hoppers
+
Recycling and Disposal hopper items.
Disposal hoppers let you zap stuff in an efficient, automated way. They're very useful for mob-farms, large mining operations, and just getting rid of the mass of junk we accumulate after awhile. They're a lot safer to install and use than a lava pit and have a builtin safety mechanism in case you accidentally shift-click that precious beacon into your disposal system.
Disposal Hopper
A pure disposal hopper works by default the way you'd expect: you pipe items into the hopper and those items go *poof*! A global "always keep" list provides a safety catch for rare items like beacons and golden apples and you can adjust this global list or give each hopper a unique keep list with an instruction card.
Hopper Craft Recipes
Crafting a disposal hopper from a shell and lava bucket. You can use a cactus block instead of a lava bucket.
How To Use Disposal Hopper (GUI)
A disposal hopper doesn't need any additional configuration to destroy items; generally it will disappear anything you put into its input inventory. A disposal hopper has a set of output slots (the rightmost three) to handle "always keep" items that you define. If one of these to-be-kept items is fed to the disposal hopper it is moved to an output slot to be piped wherever you've pointed the disposal hopper (usually back into your sorting system or to a "whoopsies" chest).
Plain disposal hopper GUI.
The default global keep list contains items we consider rare enough that it's likely a mistake that the player dropped it in the disposal (items like nether stars, beacons, golden apples, gem blocks, diamond horse armor, etc). The complete list is shown at end of the section and you can extend it by changing the mod's config file. To add kept items to a specific disposal hopper, you can create a keep list instruction card and put it in the disposal's control slot. Note that your keep list is in addition to the global list.
Defined with a keep list instruction card.
Moving "always keep" items to output slots.
Global Keep List (Default)
Both disposals and recycling hoppers check this list before destroying or in the case of a recycler, recycling any item fed to it. Some of these item cannot be removed from the global list; many are defined in the mod's config file (where you can remove or extend the list).
- Nether Stars
- Beacons
- All gems, ingots, and their ore and storage blocks
- Golden apples (both kinds)
- Diamond horse armor
- Totems
- Sponges (wet and dry)
- Ghast tears
- Ender chests
- Wither skeleton skulls
- Shulker shells
- Slime blocks
- Coal blocks
- Speckled melon
- Golden carrots
Recycling Hoppers
A recycling hopper is a specialized disposal hopper; before destroying an item, it will check it against a list of recycle recipes to see if the item can be reduced back to a basic material instead. For example, if you recycle a hopper, you can get back two or three pieces of iron. There are recycle recipes for many vanilla items and mods can register their own using the Smart Hopper API.
Hopper Craft Recipes
Crafting a recycling hopper.
A heavy-duty recycling hopper adds more slots!
How To Use Recycling Hopper (GUI)
On first glance, a recycling hopper seems to work identically to a disposal hopper. And if you don't feed in any items that it can recycle, it works exactly like a pure disposal hopper-- all incoming items are disposed of permanently. The fun begins when you put in an item that matches a recycle recipe. Make sure you setup a recycler so that the recycled materials feed back into your sorting system or go into a large enough overflow chest system.
Plain recycling hopper GUI.
Defined with a keep list instruction card.
Recycling hopper in action!
Example Vanilla Recycle Recipes
This is not the complete list of recycle recipes as the full list is too long to include here, but this list of common uses should give you an idea of how the recipes work. The recipes always convert from a refined (or 'finished') item to a single base material. You never get back all (or even most) of the materials you used to create the input item; but some is better than none! You'll need to experiment to discover what items recycle and to what basic materials. Remember a recycling hopper will not recycle or destroy any item on the global keep list (see the disposal hopper section for the default list); those items are moved to the output slots untouched.
- Bucket (any) -> 2 iron ingots
- Hopper -> 4 iron ingots
- Iron door -> 2 iron ingots
- Plain iron rail -> 2 iron nuggets (if available!)
- Golden rail -> 1 gold ingot
- Gold sword (any damage) -> 3 gold nuggets
- Diamond chest plate (any damage) -> 1 diamond
- Comparator -> 1 piece quartz
- Quartz block -> 3 pieces quartz
- Wool block (any) -> 3 pieces string
- Redstone lamp -> 3 pieces glowstone dust
- 1 TNT block -> 3 pieces gunpowder
- Stone brick block (any) -> 1 smooth stone block
- Anvil (any damage) -> 2 iron blocks
- Stained clay block -> 2 clay balls
- Prismarine brick block -> 8 prismarine shards
Using a Heavy-Duty Recycling Hopper
A heavy duty recycling hopper has a greater input and output inventory capacity compared to the regular hopper. Aside from this, it is identical in function and how you configure it.
Heavy-duty recycler's GUI.
You can use a heavy duty recycling hopper if you don't have a big sorting system to feed items back into. The hopper's larger output capacity captures more types of material in one place for you to retrieve manually.
You can use a heavy-duty recycling hopper if you're recycling a lot of non-stackable items. The hopper's larger input capacity helps to prevent your hopper from clogging as slots are taken by single items.
Finally, use a heavy duty recycler if you're feeding the hopper from multiple sources. Again, the larger input and output inventories will help to prevent the hopper inputs from backing up possibly into your item pipeline.
Auto-craft Hoppers
+
Lightweight and heavy duty auto-crafting hopper items.
General purpose auto-crafting hoppers let you automate the crafting of a single specific recipe. They are useful for shops and quickly producing large amounts of an item for building projects. Think of them like those automated cookers (chicken, steak, etc.) but for any recipe, not just a farm mob's drops.
Technically many of the smart hoppers are auto-crafters as they automate the crafting of various kinds of items. What makes these hoppers different is that they do not impose any restrictions on the recipes they can process and the items they can produce provided you supply them with all the required input items.
Hopper Craft Recipes
Crafting a 2x2 auto-crafting hopper.
Crafting a 3x3 auto-crafting hopper.
How To Use Auto-Crafting Hopper (GUI)
You must supply a valid recipe instruction card for the auto-crafting hopper to produce something. Until then, the GUI's main label is drawn in purple to signal the hopper is not properly configured. A valid recipe card displays the produced item's name and displays a "(+)" next to the "Ingredients" list in the card's tool-tip. Read the "Instructions Card" section to learn how to create a recipe card.
Undefined 2x2 auto-crafter's GUI.
For the 2x2 crafting hopper, there are four ingredient input slots that are fed from other sources, three output slots for produced items, and one special recycle slot to capture any by-products left over from using an input item. In vanilla Minecraft, the most common by-product item is an empty bucket from recipes that use buckets of liquids like milk or water. The contents of this recycle output slot can only be pulled from below by a smart disposal or conduit hopper. Of course the player can also remove items manually.
Defined with a valid recipe card.
Usually a 2x2 auto-crafter is enough to craft most recipes -- even ones that take up more than four slots on a regular crafting table. Because the smart hopper coalesces the ingredients by type, even if a shaped recipe occupies more than 4 craft table slots, it will work fine in the 2x2 auto-crafter if there are at most four unique ingredients. So for instance, something like a chest which takes up eight slots on the crafting table, actually only takes up one slot in the auto-crafter. For those times when you do have more than 4 unique ingredients, you can use a heavy duty auto-crafting hopper which allows up to 8 unique slots.
Undefined '3x3' auto-crafter's GUI
A recipe with more than 4 unique ingredients.
Each ingredient is assigned to a single slot.
Another reason to use the larger auto-crafter is if your recipe generates more than one by-product item or generates a by-product that doesn't support full 64-sized stacks. For example, your recipe generates an empty bucket and some other custom mod container item. The larger auto-crafter can handle up to three unique by-product items in its recycle slots.
A recipe that generates lots of empty buckets!
Things To Remember
- A recipe card reflects a specific version of a recipe -- the exact one shown in the crafting grid when the card was stamped. If a mod's recipe supports substitutions (for example "any kind of wool block"), the mod actually registers N different versions of its recipe with Minecraft; one for each variation. When you create a card, you're selecting a specific one!
- If your recipe does generate by-product items it's possible that those items will be lost. Although the auto-crafter tries to capture such items to its recycle slots, it will discard an item if there is no slot available.
- Auto-crafters are lossless, which means they will stop crafting if there isn't enough room in its output inventory for all of the resulting items.
- An auto-crafter's outbound redstone signal strength is based on all of its slots including the recycle slots.
Other Types of Auto-crafters
The mod contains a few specialized auto-crafters. Read the sections above for information about the storage block packer and un-packer auto-crafters. The remaining auto-crafting hoppers are described in the spoilers below.
Hopper Craft Recipes
Crafting a block finishing hopper.
How To Use Block Finishing Hopper (GUI)
For block finishing you need to select a finishing recipe which describes the blocks to be finished. You select a particular recipe by placing a sample of its input items in the hopper's solid green control slot. When the hopper recognizes the inputs as a match to a finishing recipe, its label turns from purple to the normal dark gray color.
Undefined block finishing GUI.
Smart Hopper mod pre-installs all of the vanilla block finishing recipes automatically. So for instance, you can finish smooth stone into stone brick blocks, diorite and granite into their polished versions, wood logs into planks, etc.
Defined to make polished diorite blocks.
Auto-crafting lots of nether brick blocks!
评论 0
登录后参与评分
还没有评论,来抢沙发吧