StepUp
适用于 Minecraft 1.21.x(涵盖 1.21 至 1.21.11)的 StepUp Fabric 加载器更新版本。
StepUp 增加了玩家的攀爬高度,使你可以平滑地走上方块,而不是跳上去。乍一看,其效果类似于原版的自动跳跃功能,但移动方式更加直接,避免了反复跳跃带来的尴尬时机和饥饿值消耗。
这使得该模组在日常探索、基地建造、路径行走、洞穴探险、楼梯通行、不平整地形以及原版自动跳跃显得缓慢或干扰操作的情况下特别有用。
模组功能
- 让你更平滑地走上完整高度的方块。
- 使移动手感更接近正常行走而非跳跃。
- 提供三种可随时切换的移动模式。
- 完全在客户端运行,因此可用于单人游戏和兼容原版的服务器。
- 按服务器保存模式设置,以便在适用的地方启用它,而在其他地方保持不同的行为。
在实际使用中,该模组改变了你接近原本需要跳跃的方块时的移动手感。与其不断在地形上起跳,StepUp 会提高玩家的攀爬高度,让角色以更连续的方式越过方块边缘。
为什么使用它而不是原版自动跳跃
原版自动跳跃虽然有用,但许多玩家不喜欢它,因为它:
- 在你不想触发时触发,
- 改变移动节奏,
- 使探索手感变得不够精准,
- 增加重复跳跃的行为,
- 并施加正常的跳跃饥饿惩罚。
StepUp 旨在保留自动跳跃中“越过障碍”这一有用部分,同时避免这些缺点。
模式
该模组循环切换三种模式:
StepUp
这是主要功能模式。
- 模组将玩家的攀爬高度提升至原版之上。
- 你可以无需跳跃即可走过完整高度的方块。
- 移动手感平滑且连续。
- 潜行时,模组会暂时回退到普通攀爬高度以获得更好的控制。
Disabled
- StepUp 关闭。
- 原版自动跳跃也关闭。
- 移动恢复为标准非自动跳跃行为。
Vanilla Auto Jump
- StepUp 的自定义攀爬高度行为被禁用。
- 通过正常的 Minecraft 选项开启原版自动跳跃。
- 如果你希望快速比较两种行为,这很有用。
控制
默认情况下,模式切换绑定按键为 J。
- 按
J可在StepUp、Disabled和Vanilla Auto Jump之间切换。 - 可以在 Minecraft 的控制菜单中像更改其他键位一样更改此按键。
- 切换模式时,模组会在聊天栏显示简短的状态消息,以便你立即看到当前激活的模式。
配置
StepUp 将其设置存储在:
config/stepup.json
配置是按服务器保存的。这意味着:
- 单人游戏可以有一个默认行为,
- 一个多人服务器可以使用
StepUp, - 另一个可以保持
Disabled, - 还可以有另一个保持
Vanilla Auto Jump。
这非常有用,因为某些服务器可能更适合启用此功能,而其他服务器可能有移动规则、插件或反作弊设置,此时你更希望将其关闭。
文件包含:
- 新世界和未知服务器的默认状态,
- 以及按服务器地址或单人游戏键入的特定服务器覆盖列表。
典型用例
- 在有半砖、楼梯和小高差的基地周围行走。
- 探索丘陵、洞穴和不平整地形,无需不断起跳。
- 在移动穿过部分结构和粗糙表面时进行建造。
- 享受类似自动跳跃的便利,但不想要原版的标准行为。
- 为不同服务器保持不同的移动偏好。
要求
- Minecraft Java Edition
1.21至1.21.11 - Fabric Loader
- Fabric API
- Java 21
安装
- 为你的 Minecraft 版本安装 Fabric Loader。
- 为相同版本安装 Fabric API。
- 将 StepUp jar 放入你的
mods文件夹。 - 启动游戏。
由于此模组是客户端模组,正常使用不需要在服务器端安装。
兼容性
此分支已专门针对完整的 Minecraft 1.21.x 系列进行了更新。
相同的 jar 文件旨在运行于以下版本:
1.211.21.11.21.21.21.31.21.41.21.51.21.61.21.71.21.81.21.91.21.101.21.11
在内部,此分支包含了针对 1.21.x 系列中 API 差异的兼容性工作,特别是围绕客户端键位绑定和攀爬高度处理方面。
备注
- 此模组设计用于客户端运行。
- 在正常情况下,它应能与兼容原版的服务器一起工作。
- 如果某些服务器更改移动行为或强制执行自定义限制,仍可能会干扰其效果。
致谢
原始公开发布的 StepUp 模组及其维护的全部功劳归于 Giselbaer。
- 原作者主页:
- 原始模组页面:
此分支的存在仅为了使模组在新的 Fabric 1.21.x 版本中保持可用。
项目的上游历史还包括早期 StepUp/StepUpNext 的工作,反映在存档的仓库和许可证声明中。此分支在更新当前版本兼容性的同时,保留了这一传承。
许可证
此分支继续尊重上游项目的 MIT 许可证。
StepUp
An updated Fabric build of StepUp for Minecraft 1.21.x, covering 1.21 through 1.21.11.
StepUp increases the player's step height so you can walk up blocks smoothly instead of jumping into them. The result feels similar to vanilla auto-jump at first glance, but the movement is more direct and avoids the awkward timing and hunger cost of repeated jumps.
This makes the mod especially useful for everyday traversal, base building, path walking, caves, stairs, uneven terrain, and situations where vanilla auto-jump feels slow or intrusive.
What the mod does
- Lets you walk up full blocks more smoothly.
- Keeps movement feeling closer to normal walking than to jumping.
- Gives you three movement modes that can be switched at any time.
- Works entirely on the client, so it can be used in singleplayer and on vanilla-compatible servers.
- Saves its mode per server, so you can enable it where it works well and keep different behavior elsewhere.
In practice, the mod changes how movement feels when you approach blocks that would normally require a jump. Instead of repeatedly hopping up terrain, StepUp raises the player's step height and lets the character climb over the block edge in a more continuous way.
Why use it instead of vanilla auto-jump
Vanilla auto-jump can be useful, but many players dislike it because it:
- triggers when you do not want it to,
- changes movement timing,
- makes traversal feel less precise,
- adds repeated jump behavior,
- and applies the normal hunger penalty of jumping.
StepUp aims to keep the useful part of auto-jump, walking over obstacles, without inheriting those downsides.
Modes
The mod cycles through three modes:
StepUp
This is the main feature mode.
- The mod raises the player's step height above vanilla.
- You can walk over full blocks without jumping.
- Movement feels smooth and continuous.
- While sneaking, the mod temporarily falls back to normal step height for better control.
Disabled
- StepUp is turned off.
- Vanilla auto-jump is also turned off.
- Movement returns to standard non-autojump behavior.
Vanilla Auto Jump
- StepUp's custom step-height behavior is disabled.
- Vanilla auto-jump is turned on through the normal Minecraft option.
- This is useful if you want to compare the two behaviors quickly.
Controls
By default, the mode toggle is bound to J.
- Press
Jto switch betweenStepUp,Disabled, andVanilla Auto Jump. - The key can be changed in Minecraft's Controls menu like any normal keybind.
- When you switch modes, the mod shows a short status message in chat so you can see the active mode immediately.
Configuration
StepUp stores its settings in:
config/stepup.json
The configuration is saved per server. That means:
- singleplayer can have one default behavior,
- one multiplayer server can use
StepUp, - another can stay on
Disabled, - and another can stay on
Vanilla Auto Jump.
This is useful because some servers may feel better with the feature enabled, while others may have movement rules, plugins, or anti-cheat setups where you prefer to leave it off.
The file keeps:
- a default state for new worlds and unknown servers,
- and a list of server-specific overrides keyed by server address or singleplayer.
Typical use cases
- Walking around bases with slabs, stairs, and small elevation changes.
- Exploring hills, caves, and uneven terrain without constant hopping.
- Building while moving across partial structures and rough surfaces.
- Playing with auto-jump-like convenience without wanting the normal vanilla behavior.
- Keeping different movement preferences for different servers.
Requirements
- Minecraft Java Edition
1.21to1.21.11 - Fabric Loader
- Fabric API
- Java 21
Installation
- Install Fabric Loader for your Minecraft version.
- Install Fabric API for the same version.
- Put the StepUp jar in your
modsfolder. - Start the game.
Because this mod is client-side, it does not require a server-side installation for normal use.
Compatibility
This fork was updated specifically for the full Minecraft 1.21.x line.
The same jar is intended to run on:
1.211.21.11.21.21.21.31.21.41.21.51.21.61.21.71.21.81.21.91.21.101.21.11
Internally, this fork includes compatibility work for API differences across the 1.21.x series, especially around client keybinding and step-height handling.
Notes
- This mod is designed to work on the client.
- It should work with vanilla-compatible servers in normal cases.
- Some servers may still interfere with the effect if they change movement behavior or enforce custom restrictions.
Credits
Full credit for the original public StepUp mod release and maintenance goes to Giselbaer.
- Original author profile:
- Original mod page:
This fork exists only to keep the mod usable on newer Fabric 1.21.x versions.
The upstream history of the project also includes earlier StepUp/StepUpNext work reflected in the archived repository and license notices. This fork keeps that lineage intact while updating compatibility for current versions.
License
This fork continues to respect the upstream project's MIT license.
下载 StepUpAgain2
下载 StepUpAgain2
下载 StepUpAgain2
下载 StepUpAgain2
下载 StepUpAgain2
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 StepUpAgain2
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 StepUpAgain2
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 StepUpAgain2
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 StepUpAgain2
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 StepUpAgain2
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
StepUp NeoForge 1.4.6+mc26.3
- 移植至 Minecraft 26.3 / Java 25。
- 将键盘映射和鼠标处理迁移至 Minecraft 的 SDL 输入常量。
- 保留了可重新绑定的 J/K 操作、模式切换、单服务器设置以及潜行行为。
- 移除了翻译后的操作名称中固定的默认键后缀。
依赖项
- Minecraft Java Edition 26.3 及 Java 25。
- Minecraft 26.3 所需的 NeoForge 26.3.0.3-beta 或更高版本。
Windows 上的 Prism Launcher 11.1.0
如果启动时出现原生错误导致崩溃,请在实例的 Java 参数中添加 -XX:StackShadowPages=32。确保该参数出现在启动日志中。请参阅 Prism issue #6073。
关于这个资源的讨论、问题反馈与使用心得
还没有讨论,来发第一帖吧
你是这个资源的作者?登录后可认领此资源。
相似资源
模组
显示你正在注视的方块的信息。(适用于 Minecraft 1.16+ 的 Hwyla/Waila 分支)
模组
查看物品与配方
模组
在游戏画面角落显示附近世界地形、玩家、生物和实体的地图。可创建路径点,帮助你找到标记过的位置。
模组
使用 JavaScript 编辑配方、添加自定义物品、编写世界事件!
模组
添加区块认领和玩家组队功能,并与 Xaero's Minimap 和 World Map 集成
模组
AE2:一款流行的自动化与存储模组
评论 0
登录后参与评分
还没有评论,来抢沙发吧