
StructBlend
让建筑结构与地形无缝融合。不再出现尴尬的错位!
修改前 & 修改后

这个模组修复了什么问题?
如果你玩了很多包含结构生成的模组,你可能见过类似这样的情况:
- 房子的一半悬在悬崖外,底下全是空气;
- 建筑的另一半硬塞进山坡里,门被埋在泥土中;
- 结构周围有一圈明显人工痕迹的、整齐得离谱的“泥土平台”或直墙;
- 村庄房屋悬浮在半空,底部有空隙可以钻过去;
- 一座小型砂岩平台随机漂浮在海面上。
StructBlend 会在新地形生成时修复结构周围的地形:该填的地方填充,该削的地方削平,并将边缘塑造为自然坡度,使建筑看起来就像是原本就该在那里一样。
它绝不会改变建筑本身的任何方块。它只调整建筑周围和下方的地形。
强烈建议搭配 StructureOverlapless 使用。
功能特性
自然的地形过渡
- 建筑物下方的空隙会自动用泥土和石头填充,阻碍建筑的凸起山体会被削平;
- 从建筑边缘向外延伸约 16 个方块的柔和坡度,对于地基较宽的建筑则约为 24 个方块;
- 坡度具有细微的自然变化,不是僵硬的圆锥体或平顶土堆;
- 地面与建筑地板对齐,因此建筑外部不会留下“一个方块深的沟槽”。
清理被掩埋的空间
如果山坡掩埋了建筑内部或入口,多余的地形会被雕刻掉,以便你能正常进出。
海岸与水中的结构
- 位于浅水或岸边的建筑下方会建造支撑结构,使其不再看起来像是站在桩子上;
- 最终落入水中的沙漠金字塔会获得合适的基底;
- 船只、漂流木和其他本应漂浮在水面上的物体保持原样,而不会被变成小岛;
- 那些原本会漂浮在海面上的小型孤立砂岩平台将被跳过,不再生成。
村庄的特殊处理
由于村庄房屋处于不同的高度,村庄不会像普通结构那样整体被抹平。相反,每座房屋都有独立的基础:
- 仅填充,不削平,因此山坡上的村庄不会被整平;
- 道路、桥梁和其他本应抬高的部分保持原样;
- 岸边房屋下方的单层水域会被填满,但在深水中不会创建人工岛屿。
已针对以下村庄模组进行过生成测试:Towns and Towers、Repurposed Structures、ChoiceTheorem's Overhauled Village (CTOV)、Better Villages、Villages&Pillages、Sky Villages、Aether Villages、Underground Villages、Tidal Towns、Improved Village Placement。
性能
该模组在新区块生成时进行所需的地形计算。这项工作经过专门优化和测试,开销极低,几乎可以忽略不计!
配置
配置文件位于 config/structblend-common.toml:
# 此模组不应处理的 ID 列表
excludedStructures = ["minecraft:pillager_outpost", "examplemod:example_tower"]
如果某个结构在处理后的外观变得更糟,只需将其 ID 添加到列表中即可。

StructBlend
Structures that blend seamlessly into the terrain. No more awkward placements!
Before & After

What does this mod fix?
If you play with a lot of structure mods, you've probably seen things like this:
- A house with half of it hanging off a cliff, nothing but air underneath;
- A building whose other half is jammed into a hillside, with its door buried in dirt;
- A perfectly neat "dirt platform" or straight wall around a structure that's obviously artificial;
- Village houses floating on their own, with gaps you can crawl through underneath;
- A small sandstone platform randomly floating on the ocean.
StructBlend fixes the ground around structures while new terrain is being generated: it fills where it needs filling, cuts where it needs cutting, and shapes the edges into natural slopes, so buildings look like they were always meant to be there.
It never changes any blocks of the building itself. It only adjusts the terrain around and beneath it.
Highly recommended to use alongside StructureOverlapless.
Features
Natural terrain transitions
- Gaps under buildings are automatically filled with dirt and stone, and hills that get in the way are cut down;
- A gentle slope extends about 16 blocks out from the building's edge, or about 24 blocks for buildings with wide foundations;
- Slopes have subtle, natural variation, not a rigid cone or flat-topped mound;
- The ground lines up with the building's floor, so there's no "one-block trench" left around the outside.
Clearing buried spaces
If a hillside buries a building's interior or entrance, the excess terrain is carved away so you can get in and out normally.
Structures on shores and in water
- Buildings in shallow water or on the shoreline get support built underneath, so they no longer look like they're standing on stilts;
- Desert pyramids that end up in water get a proper base;
- Boats, driftwood and other things meant to float on water are left as they are, instead of being turned into little islands;
- Small, isolated sandstone platforms that would float on the ocean are skipped and no longer generate.
Special handling for villages
Village houses sit at different heights, so villages aren't flattened as a whole like regular structures. Instead, each house gets its own foundation:
- Fill only, never cut, so hillside villages aren't leveled flat;
- Roads, bridges and other parts that are meant to be elevated stay as they are;
- Shoreline houses get the single layer of water under them filled in, but no artificial islands are created in deep water.
Generation-tested with the following village mods: Towns and Towers, Repurposed Structures, ChoiceTheorem's Overhauled Village (CTOV), Better Villages, Villages&Pillages, Sky Villages, Aether Villages, Underground Villages, Tidal Towns, Improved Village Placement.
Performance
The mod does the terrain calculations it needs when new chunks generate. This work has been specifically optimized and tested, keeping the overhead low enough to be negligible!
Configuration
The config file is located at config/structblend-common.toml:
# List of structure IDs that this mod should not process
excludedStructures = ["minecraft:pillager_outpost", "examplemod:example_tower"]
If a structure looks worse after processing, just add its ID to the list.
评论 0
登录后参与评分
还没有评论,来抢沙发吧