一款适用于 Minecraft 1.12.2 的客户端模组,允许你选择生物以查看其生成条件并实时追踪,无需任何物品。
功能
- 可通过按键绑定(默认为 O)或物品栏按钮访问 GUI。
- 左侧为可筛选滚动列表的生物;右侧面板显示详细信息和生成条件。
- 主屏幕支持对选定生物的实时追踪。双击列表中的生物可切换追踪状态。
- 点击生物群系列表可将生物群系名称复制到剪贴板。
- 支持 Just Enough Resources、自定义掉落查看器,并与 JEI 集成完整的掉落表。
- 若无服务端安装,则无法使用自定义掉落查看器(如果你玩单人游戏,可以忽略此条)。然而,只要配置文件中有 loot dump 文件,掉落表的 JEI 集成即可在没有服务端安装的情况下正常工作。
- 自定义查看器可以使用鼠标或按键打开 JEI:R/左键点击用于配方,U/右键点击用于用途。
配置项
- enableTracking:全局禁用追踪(需要重启)。
- detectionRange:设置判定生成尝试的半径。
- spawnCheckRetries:设置生成条件检查的最大重试次数。较高的值能更好地处理随机生成条件,但会增加选择时的分析时间。这可能导致在选择一些生成条件棘手的生物时出现较长的延迟。
- whitelist/blacklist:配置允许/禁止追踪的生物。白名单优先级高于黑名单。支持部分匹配(例如,
zomb匹配 ID 中包含 "zombie" 的所有生物,或minecraft匹配所有来自 Minecraft 命名空间的生物)。为了避免匹配范围过广,请保留命名空间匹配的:分隔符(例如aoa:)。由于这是一个纯客户端模组,无法在服务端强制执行生物限制。 - dropSimulationCount:在估算掉落物时要运行的战利品表模拟次数。较高的值会产生更准确的结果,但会增加分析时间。该过程在后台异步执行以避免阻塞 UI,因此增加此值不应导致问题。
- useModelXRay:启用实体预览的 X 光渲染,而不是默认的发光轮廓。
- GUI exclusion:防止某些实体被包含在 GUI/导出的战利品中。这对于召唤兽和其他临时性且不添加任何内容的生物尤其相关。
- external spawn hints:在
config/supermobtracker/spawn_hints.json中添加非自然生成或缺失生成表的生物。这旨在涵盖世界生成、结构、脚本生成、刷怪笼以及类似不会出现在正常生物群系生成列表中的来源。 - loot dump:使 JEI 集成的战利品表功能正常工作所必需。详见下方的
/smtlootdump命令部分以获取更多信息。
外部生成提示
有些生物根本不使用正常的生物群系生成表,因此分析器没有原生数据可供采样。对于这种情况,Super Mob Tracker 可以从 config/supermobtracker/spawn_hints.json 加载备用生成元数据。模组已捆绑了少数几个模组的生成提示,但这远远不够。此数据也可用于补充或覆盖已知条件的生物数据,例如添加提示。
有关格式更多信息,请参阅 GitHub 页面。
/smtlootdump
将所有战利品表转储到 config/supermobtracker/ 文件夹中的单个压缩 JSON 文件中。这是战利品表 JEI 集成正常工作所必需的,并且每当战利品表发生变化时(例如,添加/移除模组或更改模组配置后),都需要重新运行。当然,未更新的战利品转储不会破坏任何东西,但战利品信息可能会过时。
你可以提供每个战利品表要模拟的迭代次数,这将用于估算掉落几率。默认使用 dropSimulationCount 配置值。
常见问题
我需要在服务器上安装这个模组吗?
不需要,除非你想使用内置的 GUI 战利品表查看器。通常情况下,JER/JEI 集成足以查看战利品表(尽管 JER 有时可能非常不准确,因为它不模拟掉落)。即使没有服务端安装,模组也能正常工作。
通过 /smtlootdump 生成的战利品表与内置 GUI 中的战利品表大致相同,这意味着如果文件已生成,你可以完全放弃服务端安装。
生物列表是如何过滤的?
过滤框同时匹配本地化和未本地化的生物名称。这意味着你可以输入模组名称、所选语言中的名称或默认的英文名称。
生成条件似乎有问题
许多生物具有固有的随机生成条件,这些条件可能无法被分析完全捕捉。增加 spawnCheckRetries 配置可能会有所帮助,但条件仍可能稀疏。这也可能导致刷新选择时产生不同的结果。这也是为什么某些生物的分析速度较慢(可能需要一秒钟)的原因。
某些生物群系/维度/方块显示为原始注册表名称
部分模组未为其生物群系/维度//方块提供正确的本地化键。在这种情况下,你的整合包应提供一个包含相应键的 lang 文件以获取正确的名称。假设原始名称为 <modid>:<biome_name>,生物群系的本地化键格式为 biome.<modid>.<biome_name>.path,维度的为 dimension.<modid>.<dimension_name>.path,方块的为 tile.<modid>.<block_name>.name。我不会在模组本身中包含针对其他模组的特定本地化内容。当然,如果这些内容已存在本地化,则属于 Bug,应当报告。
部分掉落物缺失或错误
掉落模拟系统使用假玩家,并在一个最小化的假世界中初始化实体。然而,某些怪物可能需要真正的玩家(例如 Corail Tombstone),或者其战利品表以模拟无法复制的特殊方式进行初始化。在这些情况下,部分掉落物可能会缺失或错误。
此外,由于战利品表中统计上的随机性,除非是必定掉落的物品,否则大多数掉落物都会存在一定的波动。增加 dropSimulationCount 配置项有助于减少波动,但总会保留一些随机性。如果某个掉落物非常稀有,它可能在模拟中根本不会出现。
Curseforge 图标由 Star Artsy 制作。
A client-side Minecraft 1.12.2 mod that lets you select mobs to view spawn conditions and track live, no item required.
Features
- GUI accessible via keybinding (default O) or Inventory button.
- Filterable scrolling list of mobs on the left; right panel shows details and spawn conditions.
- Live tracking on the main screen for selected mob. Double-click a mob in the list to toggle tracking.
- Click on the biomes list to copy biome names to clipboard.
- Support for Just Enough Resources, custom drops viewer, and full drops tables integrated with JEI.
- Custom drops viewer cannot be used without server-side installation (if you play singleplayer, you can ignore this). However, the JEI integration of drops tables will work without server-side installation, as long as you have the loot dump file in config.
- The custom viewer can use mouse or keys to open JEI: R/Left-click for recipes, U/Right-click for uses.
Configs
- enableTracking: Globally disable tracking (requires restart).
- detectionRange: Set radius for considering spawn attempts.
- spawnCheckRetries: Set maximum retries for spawn condition checks. Higher values handle random spawn conditions better but increase analysis time on selection. This can lead to some high delays when selecting some mobs with tricky spawn conditions.
- whitelist/blacklist: Configure which mobs are allowed/disallowed for tracking. Whitelist takes priority over blacklist. Partial matches are supported (e.g.,
zombmatches all mobs with "zombie" in their ID orminecraftmatches all mobs from the Minecraft namespace). To avoid matching too broadly, keep the:separator for namespace matching (e.g.,aoa:). As it is a purely client-side mod, there is no way to enforce server-side mob restrictions. - dropSimulationCount: Number of loot table simulations to run when estimating drops. Higher values yield more accurate results but increase analysis time. The process is done asynchronously to avoid blocking the UI, so increasing this value should not cause issues.
- useModelXRay: Enable X-ray rendering for the entity preview, instead of the default glowing outline.
- GUI exclusion: Prevent some entities from being included in the GUI/dumped loot. This is mostly relevant on summons and other temporary mobs, that add nothing.
- external spawn hints: Add non-natural or spawn-table-less mobs in
config/supermobtracker/spawn_hints.json. This is intended for worldgen, structures, scripted spawns, spawners, and similar sources that do not appear in normal biome spawn lists. - loot dump: Required for the JEI integration of loot tables to work. See the
/smtlootdumpcommand section below, for more details.
External Spawn Hints
Some mobs do not use normal biome spawn tables at all, so the analyzer has nothing native to sample from. For those cases, Super Mob Tracker can load fallback spawn metadata from config/supermobtracker/spawn_hints.json. The mod already comes bundled with the spawn hints of a select few mods, but it is far from enough. This data can also be used to complement or override data of mobs whose conditions are known, for example to add hints.
See the github page for more information on the format.
/smtlootdump
Dumps all loot tables into a single zipped JSON file, in the config/supermobtracker/ folder. This is required for the JEI integration of loot tables to work, and will need to be re-run whenever loot tables change (e.g., after adding/removing mods or changing mod configs). Of course, an un-updated loot dump will not break anything, but the loot information may be outdated.
You may provide the number of iterations to simulate for each loot table, which will be used to estimate drop chances. The default uses the dropSimulationCount config value.
Q&A
Do I need to install this on a server?
You do not need to, unless you want to use the custom in-GUI loot tables viewer. Most of the time, the JER/JEI integration should be sufficient for loot tables viewing (although JER can be wildly inaccurate at times, due to not simulating drops). The mod will still work fine without server-side installation.
The loot tables built with /smtlootdump are about the same as the custom in-GUI loot tables, meaning you can completely ditch the server-side if the file has been generated.
How is the mobs list filtered?
The filter box matches both localized and unlocalized mob names. This means you can type the mod name, the name in your selected language, or the default English name.
The spawn conditions seem off
Many mobs have inherently random spawn conditions that may not be fully captured by the analysis. Increasing the spawnCheckRetries config can help, but the conditions could still be sparse. Refreshing the selection may also yield different results due to this. This is also why some mobs can be slow to analyze (taking a second).
Some biomes/dimensions/blocks show up as raw registry names
Some mods do not provide proper localization keys for their biomes/dimensions//blocks. In this case, your modpack should provide a lang file with the appropriate keys to get proper names. Considering a raw name of <modid>:<biome_name>, the localization key format is biome.<modid>.<biome_name>.path for biomes, dimension.<modid>.<dimension_name>.path for dimensions, and tile.<modid>.<block_name>.name for blocks. I will not include other-mods-specific localization in the mod itself. Of course, if localization for these exist, it is a bug and should be reported.
Some drops are missing or incorrect
The drop simulation system uses a fake player and initializes the entity in a minimal fake world. However, some mobs may require a real player (e.g. Corail Tombstone) or get their loot table initialized in a special way that the simulation cannot replicate. In these cases, some drops may be missing or incorrect.
On top of that, due to statistical randomness in loot tables, most drops will have some variance unless they are guaranteed drops. Increasing the dropSimulationCount config can help reduce variance, but some randomness will always remain. If a drop is very rare, it may not show up at all in the simulation.
Curseforge icon by Star Artsy.
下载 Super Mob Tracker
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Super Mob Tracker
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Super Mob Tracker
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Super Mob Tracker
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Super Mob Tracker
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Super Mob Tracker
下载 Super Mob Tracker
下载 Super Mob Tracker
下载 Super Mob Tracker
下载 Super Mob Tracker
新增
- 为具有原生生物群系列表的实体添加外部生成提示支持(而不仅限于那些没有任何原生生物群系的实体)。这些提示旨在修正或补充分析得出的生成条件,而非完全替代它们。因此,仅提示中指定的字段会覆盖分析得出的值,而未指定的字段将保留其分析得出的值。
- 为外部生成提示添加了灵活的
hints配置。它们接受一个翻译键,其中的占位符({})将被提供的物品、方块或实体替换(在适用时显示工具提示和图标)。此系统取代了之前的summon,提供了更通用且可定制的各类生成提示支持。
修复
- 修复了一些因缺少战利品表管理器而导致崩溃的实体问题。
关于这个资源的讨论、问题反馈与使用心得
还没有讨论,来发第一帖吧
你是这个资源的作者?登录后可认领此资源。
相似资源
模组
显示你正在注视的方块的信息。(适用于 Minecraft 1.16+ 的 Hwyla/Waila 分支)
模组
使用 JavaScript 编辑配方、添加自定义物品、编写世界事件!
模组
查看物品与配方
模组
在游戏画面角落显示附近世界地形、玩家、生物和实体的地图。可创建路径点,帮助你找到标记过的位置。
模组
AE2:一款流行的自动化与存储模组
模组
那是什么?一个 Waila/Hwyla 的分支。
评论 0
登录后参与评分
还没有评论,来抢沙发吧