Tellus
Tellus 是一个模组,通过将各种开源地理数据集实时转换为 Minecraft 中的区块,来复刻现实世界中的地形、道路和建筑。它专注于逼真的海拔(全球精度为 30 米,对支持更高精度的区域提供更详细的覆盖)、生物群系分布、城市、建筑以及受气候驱动的时间与天气系统,旨在将 Minecraft 转变为一个可玩的、体素化的地球地图。

灵感来源于并部分基于 Gegy 的 Terrarium:
生存模式说明:某些生存功能尚缺失(包括特定功能和生物群系)。虽然可以创建生存世界,但即将到来的更新可能会破坏这些世界;目前而言,Tellus 更适合用于测试和探索,而非长期生存。
网络与数据说明:Tellus 需要活跃的互联网连接,无法在离线状态下工作。它会逐渐流式传输地形数据集(例如土地覆盖、气候和天气数据),因此请预期会有持续的数据流量消耗,具体用量取决于你探索世界的范围。
服务器支持说明:Tellus 必须安装在服务器上,但客户端无需安装。目前尚无官方服务器支持;现阶段建议先在单人游戏中创建世界,然后将该世界移动至已安装 Tellus 的服务器中,以便新区块能由 Tellus 生成。
注意:本模组的创作过程中使用了生成式 AI 辅助。
功能特性
- 基于地理高程数据生成的地球尺度地形
- 高度自定义的地形生成(比例尺、高度限制等)
- 内置地形预览界面,可在创建世界前可视化设置效果
- 生物群系分布匹配现实世界的气候区域
- 实时天气和时间系统(可选)
- 专门的 Distant Horizons 集成支持
- Voxy 实时区块加载支持
- 游戏内地图传送 UI,可选择现实世界中的地点
Distant Horizons 集成
Tellus 支持 Distant Horizons,以渲染超出原版视距范围的行星尺度地形。当安装了 DH 时,远处地形将使用 Tellus 的数据和设置进行构建,而非通用的原版采样方式。
- 近似模式(Approximate mode):Tellus 利用 DH 的一项特定功能,直接采样高程、土地覆盖、气候和水文等数据,从而大幅加快使用 DH 时的生成速度,但会舍弃某些功能,如准确的植被和结构(例如村庄、废弃传送门)。
- 详细模式(Detailed mode):Tellus 回退到 DH 基于区块的远端地形生成器,这种方式更准确,但显著更慢。
由于 Tellus 的世界是地球尺度的,强烈建议使用 DH 或 Voxy,这对于舒适的探索和远距离视野几乎是必不可少的。
部分命令
/tellus map:打开 GeoTP 地图 UI(需要权限)。
/tellus weather:根据你当前的游戏内位置显示本地的 Tellus 天气和时间信息。
/tellus config weather enable_realtime_time <true|false>:覆盖服务器上的实时时间设置(需要权限)。
/tellus config weather enable_realtime_weather <true|false>:覆盖服务器上的实时天气设置(需要权限)。
更多命令将在后续添加。
设置
以下选项在创建 Tellus 世界时的“自定义世界生成”界面中可用。

世界设置
- 世界比例尺(World Scale):控制一个方块代表多少现实世界的米数。较低的值会创建更详细、更大的世界;较高的值会压缩距离和特征。当前限制为每个方块 1:1m 至 1:500m,计划未来扩展至高达 1:40km 的比例。
- 陆地高度比例尺(Terrestrial Height Scale):将海平面以上的高程从米转换为方块的乘数。较高的值会产生更高的山脉和地貌。
- 海洋高度比例尺(Oceanic Height Scale):将海平面以下的高程从米转换为方块的乘数。较高的值会使海洋和海沟更深。
- 高度偏移(Height Offset):将所有地形整体向上或向下移动固定的方块数。可用于提升或降低整个世界。
- 海平面(Sea Level):在不移动地形的情况下设置水位线。设置为“自动”以跟随高度偏移。
- 最大海拔(Max Altitude):方块单位下的世界上限。设置为“自动”让 Tellus 根据你的比例尺设置计算安全上限。
- 最小海拔(Min Altitude):方块单位下的世界下限。设置为“自动”让 Tellus 根据你的比例尺设置计算安全下限。
- 河流/湖泊岸线融合(River/Lake Shoreline Blend):用于将河流和湖泊边缘平滑融入附近地形的方块距离。
- 海洋岸线融合(Ocean Shoreline Blend):用于将海洋海岸线平滑融入陆地的方块距离。
- 在悬崖上限制岸线融合(Limit Shoreline Blend on Cliffs):防止在陡峭坡度过渡处进行岸线平滑处理,以保留尖锐的悬崖形态。
生态设置(开发中)
这些选项当前处于锁定状态,尚不可调整。它们描述了未来更新中将可配置的内容。
- 陆地植被(Land Vegetation):将在陆地上启用草、花和小植物。
- 陆地植被密度(Land Vegetation Density):将控制陆地植被的密集程度。
- 树木密度(Tree Density):将控制合格生物群系中刷新的树木数量。
- 水生植被(Aquatic Vegetation):将在水中启用海带和海草。
- 村庄中的农作物(Crops in Villages):将在村庄生成期间添加村庄农田地块。
地质设置
洞穴和地下生成系统仍在开发中,此处内容可能会有变动。
- 洞穴生成(Cave Generation):切换地下洞穴生成。
- 矿石分布(Ore Distribution):在 Tellus 世界中启用原版矿石分布。
- 岩浆池(Lava Pools):启用地下岩浆池。
结构设置
本部分允许您开启或关闭原版结构和世界特性,例如村庄、神殿、纪念碑、遗迹以及地下特性如深暗域和紫水晶洞。某些结构(尤其是深暗域和部分海洋结构)可能尚未正确生成,仍在开发中。
实时设置
- 实时时间:根据您在游戏内的位置,将游戏内的昼夜循环与现实世界时间同步,使日出和日落时间与该位置的本地时钟相匹配。
- 实时天气:获取您所在位置的实时天气状况并在游戏中反映出来(雨、雷暴或雪),而不是使用 Minecraft 默认的随机天气判定。
- 历史积雪覆盖(开发中):追踪近期的温度和降雪数据,以决定地面是否应该出现并持续积雪,从而创造更真实的季节性积雪效果。
兼容性设置
- Distant Horizons 渲染模式:快速模式使用 Tellus 的 LOD 生成器快速构建简化的远距离地形,成本较低。详细模式要求 Distant Horizons 对远距离地形使用完整的区块生成,虽然更准确但显著更慢且开销更大。对于大多数配置,建议保留快速 LOD 生成。
- LOD 水体解析器:为 Distant Horizons 的快速 LOD 添加详细的水深采样,改善远处的海岸线、湖泊和海底,但会增加额外开销。如果您计划在水域密集区域游玩,建议保持启用;否则可以禁用它以获得更好的性能。
- 即将推出:其他兼容性选项正在开发中,目前尚不可用。
缓存
- OSM 地图:传送地图 UI 使用的缓存地图瓦片。删除后,浏览时将强制重新下载。
- ESA WorldCover:用于生物群系和植被查询的缓存土地覆盖瓦片。
- 地形瓦片:用于地形高度采样的缓存高程瓦片。
- 总计:所有 Tellus 缓存的总大小(只读)。
- 删除缓存 / 删除所有缓存:移除缓存数据以释放磁盘空间;数据将在需要时重新下载或重建。
数据来源
ESA WorldCover 2021(土地覆盖)
- ESA WorldCover 2021(10 米土地覆盖,v200)
- (c) ESA WorldCover 项目 / 包含修改后的 Copernicus Sentinel 数据 (2021)
- 由 ESA WorldCover 联盟处理。
- 许可证:CC BY 4.0
- 游戏内处理:重投影至世界网格,重采样至方块,并缓存为瓦片以实现快速查找。
Koppen-Geiger 气候分类
- 来源:Beck, H.E., Zimmermann, N.E., McVicar, T.R., et al. (2018).
- 1 公里分辨率的当前和未来 Koppen-Geiger 气候分类图(Scientific Data)。
- 许可证:CC BY 4.0
- 出版 DOI:
- 游戏内处理:重投影并重采样以匹配世界网格,缓存以实现快速查找。
地形瓦片(全球 DEM 瓦片)
- 地形瓦片(AWS 开放数据注册表 / Mapzen Jord)
- 地形瓦片的来源致谢:
- 北极 DEM 地形数据:DEM(s) 是根据 DigitalGlobe, Inc. 的图像创建的,并在美国国家科学基金会奖项 1043681、1559691 和 1542736 下资助。
- 澳大利亚地形数据 (c) 澳大利亚联邦(地球科学澳大利亚)2017。
- 奥地利地形数据 (c) offene Daten Osterreichs - Digitales Gelandemodell (DGM) Osterreich。
- 加拿大地形数据包含根据《加拿大开放政府许可》授权的信息。
- 欧洲地形数据使用 Copernicus 数据和信息生产,由欧盟资助——EU-DEM 图层。
- 全球 ETOPO1 地形数据:美国国家海洋和大气管理局。
- 墨西哥地形数据来源:INEGI,大陆地形,2016。
- 新西兰地形数据版权所有 2011 皇冠版权 (c) 新西兰土地信息和新西兰政府(保留所有权利)。
- 挪威地形数据 (c) Kartverket。
- 英国地形数据 (c) 环境署版权和/或数据库权 2015。保留所有权利。
- 美国 3DEP(前身为 NED)以及全球 GMTED2010 和 SRTM 地形数据由美国地质调查局提供。
Open-Meteo(天气)
- 天气数据由 Open-Meteo.com 提供。
- 许可证:CC BY 4.0
- 署名:“Weather data by Open-Meteo.com”。
Tellus
Tellus is a mod that replicates real-world terrain, roads and buildings in Minecraft by converting various open-sourced geographical datasets into chunks in real-time. It focuses on realistic elevation (30m globally with more detailed coverage for areas that support it), biome placement, cities, buildings, and climate-driven time and weather, aiming to transform Minecraft into a playable, voxelised map of the Earth.

Inspired by and partially based on Gegy’s Terrarium:
Survival note: Some survival features are still missing (including certain features and biomes). While a survival world is possible, upcoming updates may break those worlds; for now Tellus is better suited for testing and exploration than long-term survival.
Internet & data note: Tellus requires an active internet connection and will not work offline. It gradually streams terrain datasets, (e.g. land cover, climate, and weather data) so expect ongoing data usage that varies with how much of the world you explore.
Server support note: Tellus must be installed on the server, but is not required on clients. Official server support is not available yet; for now you should create the world in singleplayer first, then move that world to the server (with Tellus installed) so new chunks generate with Tellus.
Note: generative AI was used to assist with the creation of this mod.
Features
- Earth-scale terrain generated from geographic elevation data
- Highly customizable terrain generation (scale, height limits, and more)
- Built-in terrain preview screen for visualizing settings before world creation
- Biomes placed to match real-world climate regions
- Real-time weather and time systems (optional)
- Dedicated Distant Horizons integration
- Voxy real-time chunk ingestion support
- In-game map teleport UI for choosing real-world locations
Distant Horizons Integration
Tellus supports Distant Horizons to render planet-scale terrain far beyond vanilla view distance. When DH is installed, distant terrain is built using Tellus data and settings instead of generic vanilla sampling.
- Approximate mode: Tellus takes advantage of a a specific feature in DH that samples elevation, land-cover, climate, and water and more data directly to drastically improve generation speeds when using DH, although discards certain features such as accurate foilage and structures (e.g. villages, ruined portals)
- Detailed mode: Tellus falls back to DH's chunk-based generator for far terrain, which is more accurate but significantly slower.
Because Tellus worlds are Earth-scale, use of DH or Voxy is strongly recommended and is almost essential for comfortable exploration and long-distance views.
Some commands
/tellus map: Opens the GeoTP map UI (requires permissions).
/tellus weather: Shows local Tellus weather and time information based on your current in-game position.
/tellus config weather enable_realtime_time <true|false>: Overrides the real-time time setting on the server (requires permissions).
/tellus config weather enable_realtime_weather <true|false>: Overrides the real-time weather setting on the server (requires permissions).
More commands will be added over time.
Settings
These options are available in the "Customize World Generation" screen when creating a Tellus world.

World Settings
- World Scale: Controls how many real-world meters are represented by one block. Lower values create more detailed, larger worlds; higher values compress distances and features. Current limits are 1:1m to 1:500m per block, with larger scales planned up to 1:40km.
- Terrestrial Height Scale: Multiplier that converts elevation above sea level from meters to blocks. Higher values produce taller mountains and landforms.
- Oceanic Height Scale: Multiplier that converts elevation below sea level from meters to blocks. Higher values deepen oceans and trenches.
- Height Offset: Shifts all terrain up or down by a fixed number of blocks. Use this to raise or lower the entire world.
- Sea Level: Sets the waterline in blocks without shifting the terrain. Set to Automatic to track the height offset.
- Max Altitude: Upper world limit in blocks. Set to Automatic to let Tellus compute a safe cap based on your scale settings.
- Min Altitude: Lower world limit in blocks. Set to Automatic to let Tellus compute a safe floor based on your scale settings.
- River/Lake Shoreline Blend: Distance in blocks used to smooth river and lake edges into nearby terrain.
- Ocean Shoreline Blend: Distance in blocks used to smooth ocean coastlines into land.
- Limit Shoreline Blend on Cliffs: Prevents shoreline smoothing on steep slopes to preserve sharp cliffs.
Ecological Settings (work in progress)
These options are currently locked and not adjustable yet. They describe what will be configurable in a future update.
- Land Vegetation: Will enable grasses, flowers, and small plants on land.
- Land Vegetation Density: Will control how dense land vegetation appears.
- Tree Density: Will control how many trees spawn in eligible biomes.
- Aquatic Vegetation: Will enable kelp and seagrass in water.
- Crops in Villages: Will add village farm plots during village generation.
Geological Settings
The cave and underground generation system is still work in progress, so expect changes here.
- Cave Generation: Toggles underground cave generation.
- Ore Distribution: Enables vanilla ore distribution in Tellus worlds.
- Lava Pools: Enables underground lava pools.
Structure Settings
This section lets you toggle vanilla structures and world features on or off, such as villages, temples, monuments, ruins, and underground features like Deep Dark and amethyst geodes. Some structures (notably Deep Dark and certain ocean structures) may not generate properly yet and are still work in progress.
Real-Time Settings
- Real-Time Time: Syncs the in-game day/night cycle to real-world time based on your in-game location, so sunrise and sunset match that location's local clock.
- Real-Time Weather: Pulls live weather conditions for your location and mirrors them in-game (rain, thunder, or snow) instead of Minecraft's default weather rolls.
- Historical Snow Coverage (work in progress): Tracks recent temperature and snowfall data to decide if snow should appear and persist on the ground, creating more realistic seasonal snow coverage.
Compatibility Settings
- Distant Horizons Render Mode: Fast uses Tellus's LOD generator to build simplified distant terrain quickly with lower cost. Detailed asks Distant Horizons to use full chunk generation for far terrain, which is more accurate but significantly slower and heavier. For most setups, keeping Fast LOD generation is recommended.
- LOD Water Resolver: Adds detailed water depth sampling to Distant Horizons fast LODs, improving coastlines, lakes, and ocean floors at distance but with extra cost. If you plan to play around water-heavy regions, it is suggested to keep this enabled; otherwise you can disable it for better performance.
- Coming Soon: Additional compatibility options are work in progress and currently unavailable.
Cache
- OSM map: Cached map tiles used by the teleport map UI. Deleting will force re-downloads as you browse.
- ESA WorldCover: Cached land cover tiles used for biome and vegetation lookups.
- Terrain tiles: Cached elevation tiles used for terrain height sampling.
- Total: Combined size of all Tellus caches (read-only).
- Delete cache / Delete all cache: Removes cached data to free disk space; data will be re-downloaded or rebuilt as needed.
Data Sources
ESA WorldCover 2021 (land cover)
- ESA WorldCover 2021 (10 m land cover, v200)
- (c) ESA WorldCover project / Contains modified Copernicus Sentinel data (2021)
- processed by ESA WorldCover consortium.
- License: CC BY 4.0
- In-game processing: reprojected to the world grid, resampled to blocks, and cached as tiles for fast lookup.
Koppen-Geiger climate classification
- Source: Beck, H.E., Zimmermann, N.E., McVicar, T.R., et al. (2018).
- Present and future Koppen-Geiger climate classification maps at 1-km resolution (Scientific Data).
- License: CC BY 4.0
- Publication DOI:
- In-game processing: reprojected and resampled to match the world grid, cached for fast lookup.
Terrain Tiles (global DEM tiles)
- Terrain Tiles (AWS Open Data Registry / Mapzen Jord)
- Source attributions for Terrain Tiles:
- ArcticDEM terrain data: DEM(s) were created from DigitalGlobe, Inc. imagery and funded under National Science Foundation awards 1043681, 1559691, and 1542736.
- Australia terrain data (c) Commonwealth of Australia (Geoscience Australia) 2017.
- Austria terrain data (c) offene Daten Osterreichs - Digitales Gelandemodell (DGM) Osterreich.
- Canada terrain data contains information licensed under the Open Government Licence - Canada.
- Europe terrain data produced using Copernicus data and information funded by the European Union - EU-DEM layers.
- Global ETOPO1 terrain data U.S. National Oceanic and Atmospheric Administration.
- Mexico terrain data source: INEGI, Continental relief, 2016.
- New Zealand terrain data Copyright 2011 Crown copyright (c) Land Information New Zealand and the New Zealand Government (All rights reserved).
- Norway terrain data (c) Kartverket.
- United Kingdom terrain data (c) Environment Agency copyright and/or database right 2015. All rights reserved.
- United States 3DEP (formerly NED) and global GMTED2010 and SRTM terrain data courtesy of the U.S. Geological Survey.
Open-Meteo (weather)
- Weather data provided by Open-Meteo.com.
- License: CC BY 4.0
- Credit: "Weather data by Open-Meteo.com".
评论 0
登录后参与评分
还没有评论,来抢沙发吧