TierVision
无需离开游戏,即可查看所有人的 PvP 段位 —— 涵盖 MCTiers、PvPTiers 和 SubTiers。
TierVision 将 Minecraft PvP 段位排名放置在你真正需要的地方 —— 玩家头顶、标签页列表,以及你可以在大厅中打开的一组查询界面。它读取 MCTiers、PvPTiers 和 SubTiers 的排名数据(这些平台对不同的武器组进行评级且经常存在分歧),并且从不假装其中某一个代表了全貌。
功能特性
玩家头顶显示段位。名牌上有一个徽章:武器组图标、段位,然后是玩家名字。
? HT1 | ItzRealMe 适用于隐藏名牌的 PvP 服务器。大多数练习和 PvP 服务器会使用记分板队伍关闭原版名牌,并绘制自己的浮动名字。这会阻止所有普通的名牌模组生效。TierVision 会检测游戏是否决定不绘制标签,并自行提供一个,位置远离服务器自身的文本。默认情况下它会标记最近的 15 名玩家,因此即使是 300 人的大厅也能保持可读性。
标签页列表和聊天栏中的段位。标签页列表默认开启。聊天栏默认关闭 —— 如果你希望击杀信息带有注释,请在设置中开启。
三个站点并列显示。每个站点拥有独立的面板,而不是合并为一个数字。它们对不同的武器组进行排名,对同一玩家的评价可能不同,且独立降级 —— 因此“PvPTiers 无法访问”和“该玩家在 PvPTiers 上无排名”会被如实区分显示,而不会都显示为空白。
站点
支持的武器组
-
MCTiers Vanilla, Sword, Axe, Pot, Netherite OP, UHC, SMP, Mace 默认开启
-
PvPTiers Sword, Axe, Pot, Netherite Pot, UHC, SMP, Mace, Crystal, Elytra 默认开启
-
SubTiers Bow, OG Vanilla, Manhunt, Bed, Trident, Diamond SMP, Diamond Vanilla, DeBuff, Creeper, Speed, Minecart, Elytra 默认关闭
SubTiers 为可选启用,关闭后将彻底移除。它对十二种与其他两个平台重叠极少的武器组进行排名 —— Manhunt、Minecart、Bed、Creeper —— 这正是你之所以需要它的原因,也是为什么它不应在未邀请的情况下出现的原因:在 MCTiers 上有排名的玩家绝大多数根本不在 SubTiers 上。一个开关即可启用它,再次关闭则会在所有地方(包括查询界面)移除它。
真实的武器组艺术图。使用各段位网站实际使用的图标 —— sword, axe, mace, pot, SMP, UHC, Netherite OP, Netherite Pot, Vanilla, Crystal —— 内联渲染在名牌、聊天栏以及菜单中。
成就标题。从 Combat Grandmaster(战斗大师)到 Rookie(新手),根据玩家的总积分以与网站相同的方式推导得出,并附带匹配的徽章。
3D 玩家模型。查找任何用户名,并在 3D 中看到他们的真实皮肤 —— 包括那些不在线、不在你的服务器上、甚至从未加入过的玩家。
使用方法
两个按键,均可在 Options → Controls → TierVision 下重新绑定:
按键 功能
```Y 查询 —— 搜索任意用户名,或浏览按段位排序的所有在线玩家
从查询界面,你可以打开完整档案(每个启用站点上的所有武器组,包含巅峰段位、地区、积分、总体排名和徽章)或两名玩家之间的直接对比。
### 命令 ###
命令 功能
- ```/tv 打开查询界面
- ```/tv config 设置
- ```/tv lookup <player> 玩家完整档案
- ```/tv tell <player> 将玩家的段位打印到聊天栏
- ```/tv compare <a> <b> 跨所有武器组的直接对比
- ```/tv source <mctiers⎮pvptiers⎮subtiers> 开启或关闭某个站点
- ```/tv source <best⎮every> 如何合并对同一武器组进行排名的站点
- ```/tv mode <kit⎮best> 徽章显示的武器组
- ```/tv toggle 开启或关闭所有显示
- ```/tv refresh 清除缓存并重新获取
- ```/tv status 配置摘要、各站点健康状况、缓存统计
- ```/tiervision 是上述所有命令的长格式写法。
阅读徽章
**HT1 ** 高段位 1 —— 最高排名
**LT3 ** 低段位 3
**RHT2 ** 退役于高段位 2
颜色随段位下降依次为 gold(金)→ orange(橙)→ purple(紫)→ blue(蓝)→ green(绿),退役排名饱和度降低。将武器组设置为 Best,每个玩家的徽章将显示其排名最高的武器组;选择特定武器组,则无论在何处均显示该武器组。
当多个启用的站点对同一武器组进行排名时,Combine(合并方式)决定你看到的内容:best 给出一个携带更好排名的徽章,every 则为每个站点给出一个徽章。
### 值得了解设置 ###
通过 /tv config 打开。
MCTiers / PvPTiers / SubTiers —— 各自一个开关。关闭即彻底移除,无处不在
Combine —— 最佳排名,或每个站点一个徽章
Kit —— 特定武器组,或 Best —— 最多六个并列显示
Tag if server hides —— 上述 PvP 服务器的名牌功能。默认开启
Max tagged —— 同时携带标签的附近玩家数量(默认 15)
Only crosshair —— 仅限制为你准星所指的玩家
Chat —— 在聊天栏中标注玩家名字。默认关闭
Combat HUD —— 战斗期间的对手卡片。默认关闭
Show peak tier —— 当玩家段位下降后,附加其历史最佳段位
做个好邻居
没有任何段位网站提供批量端点,因此繁忙的大厅可能意味着每个玩家都需要一次请求。TierVision 对此非常重视:
对站点的请求间隔发送,相同的请求被合并为单次调用;
遇到速率限制或服务器错误时,该站点进入指数退避,尊重 Retry-After 标头;
结果缓存在内存和磁盘中,因此下次启动时段位立即显示;
从未被站点收录的玩家会被记住,而非反复询问;只联系你已开启的站点 —— 禁用的站点不产生任何费用;聊天栏绝不会触发网络请求,名牌和标签页列表每秒每玩家最多询问一次,无论经过多少帧。绘制徽章是缓存读取,而非查询。皮肤解析通过 Minecraft 自身的会话服务器路径完成,而非第三方头像服务,因此查看某人不会向其他人暴露你的行为。
### 安装
需要 Fabric Loader 0.16+、Fabric API 以及 Java 21。请根据你的游戏版本选择对应的 jar 文件:
Jar | Minecraft
---|---
1.21.11 | 1.21.9 及更高版本
1.21.8 | 1.21.6 – 1.21.8
1.21.5 | 1.21.2 – 1.21.5
1.21.1 | 1.21 – 1.21.1
1.20.6 | 1.20.5 – 1.20.6
将 jar 文件和 Fabric API 放入你的 mods 文件夹中。
###备注###
本模组与 MCTiers、PvPTiers 或 SubTiers 无关。Kit 的艺术图和网站标志属于它们所有。SubTiers 自己的 Kit 艺术图尚未打包,因此其十二个 Kit 显示的是一个代表性的原版物品——Bow(弓)显示为 bow,Manhunt(追捕者模式)显示为 compass,Minecart(矿车)显示为 minecart。
某些服务器会刻意隐藏玩家名称标签。此功能始终绘制名称标签,但不会显示对你而言不可见、潜行或隐藏的玩家——它仅为你面前已渲染的玩家标注名称——但如果你的服务器不希望如此,只需在 `/tv config` 中进行一次切换即可。
TierVision
See everyone's PvP tier — from MCTiers, PvPTiers and SubTiers — without leaving the game.
TierVision puts Minecraft PvP tier rankings where you actually need them — above players' heads, in the tab list, and in a set of lookup screens you can open mid-lobby. It reads MCTiers, PvPTiers and SubTiers, which rank different kits and frequently disagree, and it never pretends one of them is the whole picture.
What it does
Tiers above players' heads. A badge on the nametag: the kit's logo, the tier, then the name.
? HT1 | ItzRealMe Works on PvP servers that hide nametags. Most practice and PvP servers switch the vanilla nametag off with a scoreboard team and draw their own floating name. That stops every ordinary nametag mod dead. TierVision notices when the game decided not to draw a label and supplies one itself, sitting clear of the server's own text. It tags the nearest 15 players by default, so a 300-player lobby stays readable.
Tiers in the tab list and chat. Tab is on by default. Chat is off by default — turn it on in settings if you want kill messages annotated.
Three sites, side by side. Each site gets its own panel rather than being blended into one number. They rank different kits, disagree about the same players, and go down independently — so "PvPTiers is unreachable" and "this player is unranked on PvPTiers" are shown as the different things they are, never both as a blank.
Site
Kits it ranks
-
MCTiers Vanilla, Sword, Axe, Pot, Netherite OP, UHC, SMP, Mace on by default
-
PvPTiers Sword, Axe, Pot, Netherite Pot, UHC, SMP, Mace, Crystal, Elytra on by default
-
SubTiers Bow, OG Vanilla, Manhunt, Bed, Trident, Diamond SMP, Diamond Vanilla, DeBuff, Creeper, Speed, Minecart, Elytra off by default
SubTiers is opt-in, and stays gone when you turn it off. It ranks twelve kits that barely overlap the other two — Manhunt, Minecart, Bed, Creeper — which is exactly why you'd want it and exactly why it shouldn't turn up uninvited: most players ranked on MCTiers aren't on SubTiers at all. One toggle switches it on, and switching it back off removes it everywhere, lookup screens included.
Real kit artwork. The actual logos the tier sites use — sword, axe, mace, pot, SMP, UHC, Netherite OP, Netherite Pot, Vanilla, Crystal — rendered inline in nametags and chat as well as in the menus.
Achievement titles. Combat Grandmaster down to Rookie, derived from the player's point total the same way the site does it, with the matching badge.
3D player models. Look up any username and see their actual skin in 3D — including players who aren't online, aren't on your server, and never have been.
How to use it
Two keys, both rebindable under Options → Controls → TierVision:
Key Opens
G Nearest player — a card for whoever is standing closest to you
Y Lookup — search any username, or browse everyone online sorted by tier
From the lookup screen you can open a full profile (every kit on every enabled site, with peak tiers, region, points, overall placement and badges) or a head-to-head comparison of two players.
Commands
Command Does
/tvOpen the lookup screen/tv configSettings/tv lookup <player>Full profile for a player/tv tell <player>Print a player's tiers into chat/tv compare <a> <b>Head-to-head across every kit/tv source <mctiers⎮pvptiers⎮subtiers>Turn a site on or off/tv source <best⎮every>How to combine sites that rank the same kit/tv mode <kit⎮best>Which kit the badge shows/tv toggleTurn all displays on or off/tv refreshDrop the cache and refetch/tv statusConfig summary, per-site health, cache stats/tiervisionis the long form of every command.
Reading a badge **HT1 ** high tier 1 — the best placement there is **LT3 ** low tier 3 **RHT2 ** retired at high tier 2 Colours run gold → orange → purple → blue → green as tiers descend, with retired placements desaturated. Set the kit to Best and each player's badge shows whichever kit they rank highest in; pick a specific kit and it shows that one everywhere.
When more than one enabled site ranks the same kit, Combine decides what you see: best gives one badge carrying the better placement, every gives one badge per site.
###Settings worth knowing###
Open with /tv config.
MCTiers / PvPTiers / SubTiers — one toggle each. Off means gone, everywhere Combine — best placement, or one badge per site Kit — a specific kit, or Best — up to six side by side Tag if server hides — the PvP-server nametag feature above. On by default Max tagged — how many nearby players carry a tag at once (default 15) Only crosshair — restrict tags to whoever you're looking at Chat — annotate player names in chat. Off by default Combat HUD — an opponent card while you're fighting. Off by default Show peak tier — append a player's best-ever tier when they've since dropped Being a good neighbour None of the tier sites offers a batch endpoint, so a busy lobby could mean a request per player. TierVision takes that seriously:
requests to a site are spaced apart and identical ones are collapsed into a single call; a rate-limit or server error puts that site into exponential backoff, honouring Retry-After; results are cached in memory and on disk, so tiers appear instantly on your next launch; players the sites have never heard of are remembered as such, rather than asked about repeatedly; only the sites you have switched on are ever contacted — a disabled site costs nothing; chat never triggers a network request at all, and nametags and the tab list ask at most once a second per player however many frames go by. Drawing a badge is a cache read, not a lookup. Skins are resolved through Minecraft's own session-server path rather than a third-party avatar service, so looking someone up doesn't tell anyone else you did.
Install
Requires Fabric Loader 0.16+, Fabric API, and Java 21. Pick the jar matching your game:
Jar Minecraft
1.21.11 1.21.9 and newer
1.21.8 1.21.6 – 1.21.8
1.21.5 1.21.2 – 1.21.5
1.21.1 1.21 – 1.21.1
1.20.6 1.20.5 – 1.20.6
Drop the jar and Fabric API into your mods folder.
###Notes###
Not affiliated with MCTiers, PvPTiers or SubTiers. Kit artwork and site logos belong to them. SubTiers' own kit art isn't bundled yet, so its twelve kits show a representative vanilla item — a bow for Bow, a compass for Manhunt, a minecart for Minecart.
Some servers hide nametags deliberately. The feature that draws tags anyway never reveals a player who is invisible, sneaking, or hidden from you — it only labels players already rendering in front of you — but if your server would rather you didn't, it's one toggle in /tv config.
下载 TierVision
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 TierVision
下载 TierVision
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 TierVision
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 TierVision
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 TierVision
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 TierVision
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 TierVision
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 TierVision
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 TierVision
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
Bug Fixes & NameTag 支持者
关于这个资源的讨论、问题反馈与使用心得
还没有讨论,来发第一帖吧
你是这个资源的作者?登录后可认领此资源。
相似资源
模组
显示你正在注视的方块的信息。(适用于 Minecraft 1.16+ 的 Hwyla/Waila 分支)
模组
使用 JavaScript 编辑配方、添加自定义物品、编写世界事件!
模组
查看物品与配方
模组
在游戏画面角落显示附近世界地形、玩家、生物和实体的地图。可创建路径点,帮助你找到标记过的位置。
模组
AE2:一款流行的自动化与存储模组
模组
那是什么?一个 Waila/Hwyla 的分支。
评论 0
登录后参与评分
还没有评论,来抢沙发吧