注意:当前不再更新或提供支持。
关于如何自定义岛屿的说明……请查看本页下方!
添加了一个适用于多人游戏和团队模式的“虚空”世界类型。
基本说明
- 确保已安装 CompatLayer (仅限 1.10/1.11)
- 在单人游戏中选择世界类型 Void? World,或在服务器上选择 voidworld 。
- 输入 /island create <可选类型> 以开始在一个岛屿上
附带 5 种默认岛屿类型,它们都有一些可自定义的配置,并且可以启用/禁用:
- 草地 (Grass)
- 沙子 (Sand)
- 雪地 (Snow)
- 木头 (Wood)
Garden of Glass (仅在配置中启用且安装了 Botania 和 Garden of Glass 时有效)
自定义岛屿
- 使用结构方块数据(位于 "保存文件夹/structures" 中)
- 将使用结构方块制作的 .nbt 文件放入 "voidislandcontrolstructures" 配置文件夹中
- 要设置出生点,请在数据模式下放置一个结构方块。将标签设置为 "spawn_point"。
- 在配置中将岛屿添加到自定义岛屿列表中
这些岛屿类型可与 Sky Resources 配合用作起始岛屿
(与 1.10 版本的 Sky Resources 不兼容)
自定义部分包含的配置项:
- 填充岛屿下方的方块
- 移除基岩
- 生成主世界(甚至仅使用单一生物群系)
- 云层和地平线的 Y 轴高度
- 岛屿 Y 轴高度、大小、缓冲距离
- 拥有虚空下界维度,并使传送门与主世界一一对应链接
- 在单个岛屿上使用单区块模式 (One Chunk Mode)
- 初始空箱子
- 初始物品栏
- 使用 startingInv 命令轻松设置!
- 只需将物品放入你的物品栏,然后使用该命令即可!
- 为每个岛屿生成命令方块
- 在世界开始时运行命令
- 以及更多高级配置项!
/island 命令有许多子命令。
- create (可选 int/string)[type] - create 命令会在世界中的某个位置创建一个新的岛屿。
- invite [player] - invite 命令邀请另一名玩家加入你的岛屿。
- join - join 命令会让你加入最近通过 invite 命令邀请你的岛屿。
- leave - leave 命令让你离开当前所在的岛屿,返回出生点,并清空物品栏。如果你是岛上最后一个人,该岛屿将无法再次被认领。
- home - home 命令将玩家传送回他们的家园岛屿,但默认情况下必须距离至少 500 格。
- spawn - spawn 命令将玩家传送到出生点。
- reset (可选 int/string)[type] - reset 命令会清除岛屿、物品栏,并像 create 命令那样重新开始全新的岛屿。
- onechunk - onechunk 命令在出生点创建一个大小为单个区块的世界边界,并重置出生点。此命令默认禁用,必须在配置中进行更改才能启用。
NOTE: CURRENTLY NOT BEING UPDATED OR SUPPORTED.
FOR INSTRUCTIONS ON HOW TO DO CUSTOM ISLANDS....LOOK DOWN ON THIS PAGE!
Adds a world type for a "void" world that works for multiplayer and teams.
Basic Instructions
- Make sure CompatLayer is installed (1.10/1.11 Only)
- Choose the world type Void? World in single-player, or voidworld on servers.
- Type /island create <optional type> to start on an island
Comes with 5 default island types that all have some customize configs and can enabled/disabled:
- Grass
- Sand
- Snow
- Wood
Garden of Glass (Only if enabled in config and Botania and Garden of Glass are installed)
Custom Islands
- Uses structure block data (located in the "save folder/structures")
- Place the .nbt files made using structure blocks in the "voidislandcontrolstructures" config folder
- To set a spawn point, place down a structure block in data mode. Set the tag to "spawn_point".
- Add the island to the Custom Islands list in the config
These island types work with Sky Resources as starting islands
(Incompatible with Sky Resources on 1.10)
Customize some of these included configs:
- Fill blocks for under the islands
- Get rid of bedrock
- Generate an overworld (and even with a single biome)
- Cloud and horizon Y level
- Island Y level, Size, Buffer Distance
- Have a void nether dimension, and have portals link 1-1 to the overworld
- One Chunk Mode on 1 island
- Starter Empty Chest
- Starting Inventory
- Use the startingInv command to easily set it!
- Just put the items in your inventory and use the command!
- Have command blocks spawn for each island
- Run commands on world start
- Along with more advanced configs!
The /island command has many sub-commands.
- create (optional int/string)[type] - The create command creates a new island at a position in the world.
- invite [player] - The invite command asks another player join your island.
- join - The join command will have you join an island if recently asked by the invite command.
- leave - The leave command has you leave the island you're on, go to spawn, and clears the inventory. If you are the last person on the island, the island can't be claimed again.
- home - The home command teleports the player back to their home island, but has to be by default 500 blocks away.
- spawn - The spawn command teleports the player to spawn.
- reset (optional int/string)[type] - The reset command clears the island, the inventory, and starts brand new like the create command does.
- onechunk - The onechunk command creates a world border of one chunk size at spawn and resets spawn. This command is disabled by default and has to be changed in the config.
下载 Void Island Control
下载 Void Island Control
下载 Void Island Control
下载 Void Island Control
下载 Void Island Control
下载 Void Island Control
下载 Void Island Control
下载 Void Island Control
下载 Void Island Control
下载 Void Island Control
1.5.3
出生岛屿现在应在正确的维度生成
出生点不应重置?也许吧?希望如此?可能不会……
自定义按钮现在应显示在 WORLDTYPE 世界生成设置中
1.5.2
添加了仅用于服务器的自动创建岛屿配置
希望已修复自定义岛屿的光照问题
添加了禁用 home 和 visit 命令的配置
添加了 list 管理员命令以列出所有岛屿
1.5.1
现已确保修复自定义岛屿的生成问题
添加了 buff 计时器配置,以控制传送时 buff 的持续时间
单人游戏或单岛合作模式下的玩家可以按需建造任意距离
修复了尝试访问离线玩家时的 NPE(空指针异常)
1.5.0
玩家登录时将直接传送,而非等待最初几个游戏刻后
希望已修复自定义岛屿的出生点
修复了 leave 命令中的拼写错误,使其使用正确的命令名称
修复了在其他维度中 home 命令无法正常工作的问题
1.4.3
修复了 /islandAdmin getIslandHere 命令无法工作的问题
延长了抗性时间,以避免在使用命令传送时死亡
最后离开其岛屿的玩家需再次输入命令以确认
1.4.2
修复了模组方块在自定义岛屿中无法工作的问题
修复了 forcespawn 配置被反转的问题
改进了 join/invite 命令的帮助信息
1.4.1
热修复启动时崩溃的问题
1.4.0
新的出生点系统
- 使用结构方块数据结构。在你希望玩家生成自定义岛屿的位置放置它,并赋予其 spawn_point 标签
- 不再为此使用配置文件
修复了一些管理员命令无法工作的问题
玩家在传送时应减少(尽可能避免)死亡情况
1.3.10
修复了岛屿创建命令的问题
1.3.9
自定义岛屿现在可以包含结构方块生成的结构
修复了在 createIslands 配置关闭的情况下创建岛屿命令仍可工作的问题
修复了主出生岛屿在某些情况下未使用正确类型的问题
1.3.8
修复了出生保护消息一直显示的问题
修复了无法访问其他岛屿的问题
玩家现在将生成到正确的起始维度,且无崩溃或错误
添加了岛屿保护配置,以禁用对岛屿保护的检查
1.3.6
在配置文件中添加了新的世界类型 "CUSTOMIZED" 选项
修复了创建世界时的崩溃问题
1.3.5
添加了一些管理员命令
添加了出生保护
添加了隐藏提示条(toast)的配置
添加了岛屿保护/建筑范围的配置
处于出生点之外或自身岛屿之外的玩家将被传送
在配置文件中添加了新的世界类型 "WORLDTYPE" 选项
1.3.4
修复了末地中末地传送门生成的问题
添加了配置以更改发生岛屿管理的维度
熄灭火焰:首次生成的玩家会被熄灭火焰(这在极少数情况下会导致玩家在生成到正确位置前被烧死)
在其他维度中隐藏帮助提示条
1.3.3
希望已修复下界/末地结构配置以正确工作
1.3.2
修复了当 (0,0) 处的出生岛屿为自定义岛屿时岛屿创建的问题
1.3.1
添加了强制生成配置
添加了主岛屿 (0,0) 类型配置
修复了草地岛屿方块的问题
1.3.0
添加了自定义岛屿支持!
- 使用结构方块数据
- 将使用结构方块创建的 .nbt 文件放入 "voidislandcontrolstructures" 配置文件夹中
- 在配置文件的自定义岛屿列表中添加该岛屿
更改并改进了配置文件。这将导致现有配置失效
更改并移除了下界与主世界保持 1:1 比例的配置!传送门将不再通往相同的位置!
添加了生成下界结构的配置
添加了使末地为虚空状态的配置
添加了生成末地结构的配置
更新了 GoG 右键操作以匹配 Botania 的玩家改进生成机制(希望效果更好?)
1.2.5
玻璃花园(Garden of Glass)岛屿回归!
1.2.4
修复了实体前往下界或其他情况导致的崩溃(希望如此)
将提示条通知改为显示 /island 以提供帮助,从而提供更长的命令列表
延长了抗性时间以避免受到伤害
1.2.3
热修复与其他实体相关的崩溃问题
在出生点时会弹出岛屿通知
1.2.2
热修复服务器崩溃问题
1.2.1
添加了 /kick 命令
访问其他岛屿时强制进入旁观者模式
提示条通知会告知你使用 /island create
1.2.0
更新适配 1.12!
目前显然不支持 GoG
1.1.7
添加了岛屿生物群系配置,以更改岛屿周围的生物群系
1.1.6
如果环境寒冷,木质岛屿将变更为更温暖的生物群系
1.1.5
热修复 1.1.4 版本中丢失的岛屿数据问题
1.1.4
添加了配置选项以禁用清除/替换物品的功能
1.1.3
修复了 join/invite 命令(希望如此)
在 1.11 中添加了 GoG 支持
现在可以在 GoG 岛屿上执行特殊的 GoG 操作,例如获取鹅卵石(仅限新创建的岛屿)
在启用自动创建配置时,禁用了创建消息
1.1.2
在炎热生物群系中生成的雪岛将变为平原,以允许雪人生成
1.1.1
修复邀请/加入命令的热修复
1.1.0
新增对 Garden of Glass 的支持!
新增 startingInv 命令,以便轻松设置配置!
新增加入命令!
新增配置选项,禁止玩家创建新岛屿
关于这个资源的讨论、问题反馈与使用心得
还没有讨论,来发第一帖吧
你是这个资源的作者?登录后可认领此资源。
相似资源
模组
原版世界生成优化模组
模组
新增 50+ 个独特生物群系,为你的世界增添新树木、花卉等更多元素!
模组
基于 GTCEu 1.12.2 的现代 GregTech
模组
让你能够在世界中的任何位置定位结构。
模组
简单的原版生物群系更新,包含有趣的怪物、方块等更多内容!
模组
为你的终界增添新生物群系、神秘仪式和全新生物
评论 0
登录后参与评分
还没有评论,来抢沙发吧