? AstraRedstoneSystems
使用逻辑方块、内存、计时器、无线信号和数据处理,在不使用线缆的情况下构建复杂的红石系统。
由 DawcoU ?? 从波兰 ? 创建并维护
AstraRedstoneSystems 是一款面向技术型玩家和地图制作者的强大工具,允许你使用专用的逻辑方块来创建复杂的红石机制。适用于较新的 Minecraft 版本(1.18 - 26.2+)。 基于 Java 17 开发并利用 Paper API 实现最高效率,它是生存服、技术服和小游戏服务器的完美选择。??
⭐ AstraRedstoneSystems 支持:
- Paper
- Purpur
- Arclight(支持,但不推荐)
- Spigot(支持,但不推荐)
?⚠️ 支持 Spigot,但它不是推荐的运行平台。 某些功能的行为可能不同或导致兼容性问题。 强烈建议使用 Paper 或其分支以获得最佳体验。
? 主要功能
- 核心逻辑门: 包含所有基本门,如 非 (NOT)、与 (AND)、或 (OR)、异或 (XOR)、与非 (NAND)、或非 (NOR)、同或 (XNOR)。 ?
- 数据处理: 用于数学运算、变量和比较的高级门电路。 ?
- 内存与定时: RS 锁存器、T 触发器以及增强型中继器,延迟可达数秒。 ⏱️
- 远距离感应: 可在远处工作的运动传感器。 ?
- 多输入门: 基础逻辑门(例如 AND、XOR、OR)可拥有 2-3 个输入端 ???
- 便捷的门配置: 通过直观的图形用户界面轻松编辑门设置。 ?️
?️ 命令与权限
| 命令 | 描述 | 权限 |
|---|---|---|
/gate <category> <type> |
获取特定的逻辑门方块 ? | astrars.gates.<category> |
/gate <category> <type> <param> |
获取带参数的门(例如 DECODER 5) ⚙️ |
astrars.gates.<category> |
/ars help |
显示插件帮助菜单 ❓ | 无 |
/ars info |
显示作者、版本和许可证信息 ℹ️ | 无 |
/ars reload |
重新加载配置文件和语言文件 ⚙️ | astrars.reload |
/ars selector |
给予选择工具魔杖 ? | astrars.admin |
/ars cut |
将选定的电路区域剪切到剪贴板 ✂️ | astrars.admin |
/ars copy |
将选定的电路区域复制到剪贴板 ? | astrars.admin |
/ars paste |
将剪贴板中复制的电路粘贴到当前位置 ? | astrars.admin |
/ars undo |
撤销上次粘贴操作 ↩️ | astrars.admin |
/ars redo |
恢复之前撤销的粘贴操作 ↪️ | astrars.admin |
/ars rotate <90 | -90 | 180> |
按指定角度旋转剪贴板中的复制电路 ? | astrars.admin |
/ars schematic save <name> |
将当前剪贴板内容保存为结构文件 ? | astrars.admin |
/ars schematic load <name> |
将结构文件加载到剪贴板 ? | astrars.admin |
/ars schematic delete <name> |
删除已保存的结构文件 ?️ | astrars.admin |
? 完整门列表与文档
所有方块在放置时都有一个预定义的输出方向(正面),这取决于你放置时的朝向。输入来自背面、左侧或右侧。
⚙️ 1. 逻辑类 (/bramka logic <type>)
- 非门 (NOT) ?:反转来自背面的输入信号。
- 或非门 (NOR) ?:仅当所有侧面输入均为 OFF 时,输出才为 ON。
- 与门 (AND) ?:仅当两侧输入均为 ON 时,输出才为 ON。
- 或门 (OR) ?:如果至少一个输入(背面或侧面)为 ON,则输出为 ON。
- 缓冲门 (BUFFER) ?:隔离并将来自背面的信号向前传递。
- 脉冲门 (PULSER) ?:单稳态电路。检测来自背面的上升沿,触发一个干净的 1 tick 脉冲 输出,然后立即关闭。
- 与非门 (NAND) ?:与门的反相。仅当两侧均为 ON 时,输出才为 OFF。
- 同或门 (XNOR) ?:如果两侧输入相同(均为 ON 或均为 OFF),则输出为 ON。
- 非蕴含门 (NIMPLY) ?:非蕴含。仅当侧面为 OFF 时,输出为 ON。
- 异或门 (XOR) ?:异或。如果两侧输入不同,则输出为 ON。
- 蕴含门 (IMPLY) ?:仅当背面为 ON 且侧面为 OFF 时,输出才为 OFF。
- 多路复用器 (MUX) ?:根据后方输入的状态,传递来自左侧或右侧的信号。如果后方输入为 OFF,则取左侧信号;如果为 ON,则取右侧信号。
? 2. 内存类 (/bramka memory <type>)
- 锁存器 (LATCH) ?:RS 锁存器存储单元。在一侧右边设置输入,在左侧重置。
- T 触发器 (TFF) ?:每次接收到来自背面的短脉冲时,改变其输出状态(切换 ON/OFF)。
- 存储单元 (MEMORY_CELL) ?:它存储背面的二进制信号,在右侧输入处接收红石信号,将其写入方块中间,并在左侧输入处读取它并开启输出。
? 3. 数字类 (/bramka number <type>)
- MATH ?: 核心计算器方块。接收来自左侧和右侧输入的数字,执行操作(
ADD、SUB、MUL、DIV、POW),并将结果向前输出。 - DECIMAL_ACCUMULATOR ?: 累加器,用于组合数字以形成更大的数值(例如,先输入 1 再输入 2 会生成 12)。在侧面脉冲时立即重置。
- COUNTER ⬜: 计数器。根据侧面输入增加或减少其内部存储的数字。
- COMPARATOR ?: 比较器。比较来自左侧和右侧的两个数字。支持
==、>、<、>=、<=、!=。如果条件为真,则输出红石信号。 - DECODER ?: 解码器。当背面传入的数字与预设的目标参数匹配时,输出红石信号。
- RANDOM_BOOLEAN ?: 随机布尔值生成器。触发时生成随机的真/假状态。
- RANDOM_NUMBER ?: 随机数生成器。在指定范围内生成随机数。
- NUMBER_GATE ?: 常量提供者。从背面充能时,输出一组预配置的数字。
- BOOLEAN_GATE ?: 布尔门。将红石信号转换为数据。充能时输出
1,未充能时输出0。
? 4. 字符串类 (/bramka string <type>)
- STRING_COMPARATOR ?: 字符串比较器。比较来自两侧的两个文本字符串。
- STRING_DECODER ?: 字符串解码器。当传入的文本与解码器的文本参数匹配时,输出红石信号。
- STRING_GATE ?: 字符串常量提供者。充能时输出一段预设的文本。
? 5. 数据类 (/bramka data <type>)
- CABLE_DATA ⚫: 通用数据高速公路。在数据方块之间传输文本和数字,且不会与常规红石混淆。包含防回波保护!
- DISPLAY ⬜: 文本全息显示。动态地在空中渲染来自背面的任何字符串/数字。
- TRANSISTOR ?: 数据阀门。除非被侧面的红石信号阻挡,否则将来自背面的数据传输到前面。
- DISK_GATE (Formerly VARIABLE_GATE) ?: 固定式的字符串/数字存储单元。背面用于接收并存储传入的文本或数字,侧面用于重置该单元。
- RAM_GATE ?: 易失性存储单元。工作原理与 DISK_GATE 相同,但需要从右侧获得持续的红石信号来存储并保持当前值,并从左侧进行重置。
- BATTERY ?: 能量存储单元。从背面充能时充电,并随时间缓慢衰减。以其当前状态的百分比形式输出(例如
85%)。 - DATA_DETECTOR ?: 数据存在传感器。监听来自背面的信号,仅在接收到有效数据(如文本或数字)时开启其输出。如果输入为空或没有数据,则保持关闭状态。
? 6. 空间(无线)类 (/bramka space <type>)
- SENDER ?: 蓝牙发射器。读取来自背面的文本/数字或标准红石信号,并将其无线广播到特定频道。
- RECEIVER ?: 蓝牙接收器。调谐至某个频道,捕获传输的数据字符串或红石信号,并将其向前输出。
- SENSOR ?: 运动雷达。扫描配置的半径,如果在附近检测到生物实体,则输出红石信号。
⏱️ 7. 时间类 (/bramka time <type>)
- CLOCK ?: 自动时钟发生器。根据配置的间隔不断切换其输出。
- CLOCK_GATE ?: 门控时钟。仅当背面输入处于活跃充能状态时,才切换其输出。
- REPEATER ?: 高级中继器。允许自定义长达数秒的延迟,而不会损失信号强度。
? 安装
- 从 Modrinth 下载
.jar文件。? - 将其放入你的
plugins文件夹中。? - 重启服务器。?
- 在语言文件夹中自定义消息,并在
config.yml中进行设置。?⚙️
?️ 其他项目
?️ AstraLogin - 看看我的另一个插件!这是一个现代、安全且轻量级的登录系统,采用 Bcrypt 哈希算法和先进的玩家保护功能。
链接 ?
GitHub AstraRedstoneSystems: GitHub ?️
? 支持与社区
如果你需要帮助、想要报告错误或跟随 DawcoU 的开发进度,请加入我们的官方 Discord 社区:
? 加入我们的 Discord 服务器 ??
? AstraRedstoneSystems
Build complex redstone systems without cables using logic blocks, memory, timers, wireless signals and data processing.
Created and maintained with ? from Poland by DawcoU ??
AstraRedstoneSystems is a powerful tool for technical players and map makers, allowing you to create complex Redstone mechanisms using dedicated logic blocks. For newer Minecraft versions (1.18 - 26.2+). Developed in Java 17 and leveraging the Paper API for maximum efficiency, it is the perfect choice for Survival, Technical, and Mini-Game servers. ??
⭐ AstraRedstoneSystems supports:
- Paper
- Purpur
- Arclight (supported, but not recommended)
- Spigot (supported, but not recommended)
?⚠️ Spigot is supported, but it is not the recommended platform. Some features may behave differently or cause compatibility issues. Paper or its forks are strongly recommended for the best experience.
? Key Features
- Core Logic Gates: Includes all basic gates like NOT, AND, OR, XOR, NAND, NOR, XNOR. ?
- Data Processing: Advanced gates for math, variables, and comparisons. ?
- Memory & Timing: RS-Latch, T-Flip-Flop, and enhanced repeaters with delays up to several seconds. ⏱️
- Long-Range Sensing: Motion sensors that work at a distance. ?
- Multi-input gates: Basic logic gates (e.g., AND, XOR, OR) can have 2-3 inputs ???
- Convenient Gate Configuration: Easily edit gate settings through an intuitive GUI. ?️
?️ Commands & Permissions
| Command | Description | Permission |
|---|---|---|
/gate <category> <type> |
Receive a specific logic gate block ? | astrars.gates.<category> |
/gate <category> <type> <param> |
Receive a gate with parameter (e.g. DECODER 5) ⚙️ |
astrars.gates.<category> |
/ars help |
Displays the plugin help menu ❓ | None |
/ars info |
Displays information about author, version, and license ℹ️ | None |
/ars reload |
Reloads configuration and language files ⚙️ | astrars.reload |
/ars selector |
Gives the selection tool wand ? | astrars.admin |
/ars cut |
Cuts the selected circuit area into the clipboard ✂️ | astrars.admin |
/ars copy |
Copies the selected circuit area to the clipboard ? | astrars.admin |
/ars paste |
Pastes the copied circuit from clipboard at current position ? | astrars.admin |
/ars undo |
Reverts the last paste action ↩️ | astrars.admin |
/ars redo |
Restores the previously undone paste action ↪️ | astrars.admin |
/ars rotate <90 | -90 | 180> |
Rotates the copied circuit in clipboard by specified degrees ? | astrars.admin |
/ars schematic save <name> |
Saves the current clipboard contents to a schematic file ? | astrars.admin |
/ars schematic load <name> |
Loads a schematic file into the clipboard ? | astrars.admin |
/ars schematic delete <name> |
Deletes a saved schematic file ?️ | astrars.admin |
? Full Gate List & Documentation
All blocks have a predefined output direction (Front) based on where you look during placement. Inputs come from the Back, Left, or Right sides.
⚙️ 1. Logic Category (/bramka logic <type>)
- NOT ?: Inverts the input signal from the back.
- NOR ?: Output ON only if all inputs sides are OFF.
- AND ?: Output ON only if both side inputs are ON.
- OR ?: Outputs ON if at least one input (Back or Sides) is ON.
- BUFFER ?: Isolates and passes the signal from the back forward.
- PULSER ?: Monostable circuit. Detects the rising edge from the back and triggers a clean 1-tick pulse output, then instantly shuts down.
- NAND ?: Inverted AND. Output OFF only if both sides are ON.
- XNOR ?: Output ON if both side inputs are identical (both ON or both OFF).
- NIMPLY ?: NOT IMPLY. Output ON only if Sides are OFF.
- XOR ?: Exclusive OR. Output ON if side inputs are different.
- IMPLY ?: Output OFF only if Back is ON and Sides are OFF.
- MUX ?: Multiplexer. Passes the signal from the left or right side, depending on the status of the rear input. If the rear input is OFF, it takes the signal from the left side, and if ON, it takes the signal from the right side.
? 2. Memory Category (/bramka memory <type>)
- LATCH ?: RS-Latch memory cell. Set input on one right side and Reset on the left side.
- TFF ?: Toggle Flip-Flop. Changes its output state (Toggles ON/OFF) every time it receives a short pulse from the back.
- MEMORY_CELL ?: It stores the binary signal at the back, takes the redstone signal at the right input, writes it to the middle of the gate and at the left input reads it and turns on the output.
? 3. Numbers Category (/bramka number <type>)
- MATH ?: Core calculator block. Takes numbers from Left and Right inputs, performs actions (
ADD,SUB,MUL,DIV,POW), and sends the result forward. - DECIMAL_ACCUMULATOR ?: Accumulates digits to form larger numbers (e.g., typing 1 then 2 creates 12). Resets immediately on side pulse.
- COUNTER ⬜: Increases/decreases its internal stored number based on side inputs.
- COMPARATOR ?: Compares two numbers from Left and Right sides. Supports
==,>,<,>=,<=,!=. Outputs a redstone signal if true. - DECODER ?: Outputs a Redstone signal if the incoming number from the back matches the preset target parameter.
- RANDOM_BOOLEAN ?: Generates a random true/false state when triggered.
- RANDOM_NUMBER ?: Generates a random number within a specified range.
- NUMBER_GATE ?: Constant provider. Outputs a preconfigured number when powered from the back.
- BOOLEAN_GATE ?: Converts Redstone to Data. Outputs
1if powered, and0if unpowered.
? 4. String Category (/bramka string <type>)
- STRING_COMPARATOR ?: Compares two text strings from the sides.
- STRING_DECODER ?: Outputs a Redstone signal if the incoming text matches the decoder's text parameter.
- STRING_GATE ?: Constant text provider. Outputs a preset piece of text when powered.
? 5. Data Category (/bramka data <type>)
- CABLE_DATA ⚫: The universal data highway. Transfers text and numbers between data blocks without mixing them up with normal Redstone. Includes anti-echo protection!
- DISPLAY ⬜: Text hologram display. Renders any incoming string/number from the back dynamically in the air.
- TRANSISTOR ?: Data valve. Passes data from the back to the front unless it is blocked by a side Redstone signal.
- DISK_GATE (Formerly VARIABLE_GATE) ?: The fixed String/Number memory cell on the back takes and stores incoming text or number and the sides are used to reset the cell.
- RAM_GATE ?: Volatile memory cell works the same as DISK_GATE but requires a constant redstone signal from the right side to store and hold the current value and the left side resets it.
- BATTERY ?: Energy storage cell. Charges when powered from the back and slowly decays over time. Outputs its current status as a percentage (e.g.,
85%). - DATA_DETECTOR ?: Data presence sensor. Listens for signals from the back and turns ON its output only when valid data is received (such as text or a number). Remains OFF if the input is empty or has no data.
? 6. Space (Wireless) Category (/bramka space <type>)
- SENDER ?: Bluetooth transmitter. Reads text/numbers or standard Redstone signals from the back and broadcasts them wirelessly to a specific channel.
- RECEIVER ?: Bluetooth receiver. Tunes into a channel, captures the transmitted data string or Redstone signal, and outputs it forward.
- SENSOR ?: Motion radar. Scans a configured radius and outputs a Redstone signal if a living entity is detected nearby.
⏱️ 7. Time Category (/bramka time <type>)
- CLOCK ?: Automatic clock generator. Constantly toggles its output based on a configured interval.
- CLOCK_GATE ?: Gated clock. Toggles its output only when the back input is actively powered.
- REPEATER ?: Advanced repeater. Allows custom delays up to several seconds without losing signal strength.
? Installation
- Download the
.jarfile from Modrinth. ? - Drop it into your
pluginsfolder. ? - Restart your server. ?
- Customize your messages in the languages folder and settings in
config.yml. ?⚙️
?️ Other Projects
?️ AstraLogin - Check out my other plugin! It's a modern, secure, and lightweight login system featuring Bcrypt hashing and advanced player protection.
Links ?
GitHub AstraRedstoneSystems: GitHub ?️
? Support & Community
If you need help, want to report a bug, or follow the development by DawcoU, join our official Discord community:
? Join our Discord Server ??
下载 AstraRedstoneSystems
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 AstraRedstoneSystems
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 AstraRedstoneSystems
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 AstraRedstoneSystems
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 AstraRedstoneSystems
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 AstraRedstoneSystems
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 AstraRedstoneSystems
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 AstraRedstoneSystems
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 AstraRedstoneSystems
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
⚡ AstraRedstoneSystems v1.6.0 - 逻辑与架构大更新
⚡? 全面重构与 JSON 存储迁移
- 核心引擎重构与技术债清理: 整个代码库已彻底从头重构!我们清除了遗留的代码结构,并消除了旧版本中累积的技术债,从而构建出更清晰、更快且更易维护的架构。 ?️⚡
- YAML 到 JSON 迁移: 门控数据存储和 AstraRS 蓝图文件现已正式从 YAML 文件迁移至优化的 JSON 结构。此次架构升级显著提高了读写吞吐量,并加快了系统加载速度。 ??
?️?️ 交互式门控配置 GUI
- GUI 配置套件: 告别输入冗长繁琐的命令吧!现在右键点击任意已放置的逻辑门,即可立即打开直观的交互式 GUI 菜单,只需几次点击,您便可配置参数、修改内部逻辑状态以及微调门控行为。 ?️✨
?? 多输入逻辑门与新数据检测器
- 多输入门支持: 基础及高级逻辑门(AND、XOR、NOR、OR、NAND、XNOR)现已支持多个同时输入连接!单个门现在可以无缝处理来自背面及两侧侧面的同时输入。 ??
- 新
Data_Detector门: 引入了专用的数据线组件!Data_Detector门会监控从其后方连接进入的数据流(数字或文本值)。当有效数据通过时,它会自动在前端触发一个激活的红石脉冲输出;当未检测到数据信号时,则保持非激活状态。 ?⚡
??️ 门清理与系统优化
- 废弃同步器门移除: 过时的
Synchronizer门已从插件生态系统中彻底移除。其功能属于冗余设计,移除它可以在不牺牲灵活性的前提下简化复杂的电路设置。 ?️❌ - 大规模门网络优化: 在处理加载区块内数百甚至数千个活跃逻辑门时,大幅提升了服务器性能和刻执行效率。 ??
- 破坏与物品掉落修复: 解决了边缘情况下的故障:摧毁门块时偶尔无法掉落正确的自定义物品,或在世界文件中残留逻辑数据的问题。 ?️?
感谢您对 AstraRedstoneSystems 开发的支持!建造宏伟建筑,保持逻辑思维,并在我们的 Discord 上报告任何错误! ???
关于这个资源的讨论、问题反馈与使用心得
还没有讨论,来发第一帖吧
你是这个资源的作者?登录后可认领此资源。
相似资源
插件
PacketEvents 是一款专为 Minecraft Java 版打造的协议库,旨在简化数据包的处理与传输。
插件
ExyliaPlugins 的库。
插件
通过对话框或铁砧界面帮助你的 Anthme
插件
重新定义服务器上的生物运输方式。使用高度可定制的口袋道具,安全地捕获、存储和释放任何实体。
插件
为基于 Spigot/Paper/Folia 的服务器添加对 Vivecraft 的支持
插件
用于绘制游戏内地图或在浏览器中随探索实时进行地图绘制的实时地图。
评论 0
登录后参与评分
还没有评论,来抢沙发吧