Capture Biomes
是否曾梦想将冰雪覆盖的苔原带入你阳光明媚的沙漠世界?或者把你的森林变成一片沼泽仙境?
借助 Capture Biomes,你可以将任何生物群系装入瓶中,并在任意位置释放——
按照你的意愿重塑 Minecraft 世界!
功能
? 使用信标将任何生物群系捕获到 生物群系药水 中
? 药水的颜色、名称和描述与所捕获的生物群系相匹配
? 根据信标金字塔的大小,生成更大范围的生物群系药水
⚙️ 完全支持在 config.yml 中进行配置
使用方法
- 放置一个信标,并用常规的金字塔结构为其充能
- 将所需数量的经验瓶投掷到信标顶部:
- 1 级信标 + 16 个经验瓶 → 4x4 生物群系药水
- 2 级信标 + 32 个经验瓶 → 8x8 生物群系药水
- 3 级信标 + 48 个经验瓶 → 16x16 生物群系药水
- 4 级信标 + 64 个经验瓶 → 32x32 生物群系药水
- 信标会自动生成位于其所在生物群系的 生物群系药水
- 将该药水投掷到另一个生物群系的地面上,即可改变该区域的生物群系
信标的等级取决于金字塔的大小:
- 1 层 → 1 级
- 2 层 → 2 级
- 3 层 → 3 级
- 4 层 → 4 级
安装
- 从 Modrinth 或 GitHub 下载最新的 .jar 文件
- 将其放入服务器的
plugins 文件夹中
- (可选)通过
config.yml 配置插件,然后重启服务器或使用插件的重载命令
药水尺寸
生物群系药水的大小取决于创建它时所使用的信标等级。
投掷后,药水会影响一个 size × size × size 的长方体区域,其中 size 是对应信标等级的数值(可在 config.yml 中配置)。
示例: 在 2 级信标上创建的药水会影响 8 × 8 × 8 个方块的范围,以药水落地点为中心。
高度行为:
- 如果中心坐标上方有实心方块(例如在洞穴中),生物群系会向上延伸至该方块上方
size 个方块。
- 如果中心坐标上方没有实心方块,生物群系会向上延伸至世界的最大高度。
- 生物群系始终会向下延伸至药水落地点下方
size 个方块。
- 向上和向下延伸的方块数量是可配置的,可以通过修改配置文件中的
y-offset-multiplier 来调整。
指令
| 指令 |
描述 |
权限 |
/capturebiomes disable |
禁用插件。 |
OP |
/capturebiomes enable |
启用插件。 |
OP |
/capturebiomes version |
在游戏中显示当前插件版本并检查更新。 |
OP |
/capturebiomes givebiomepotion <biome> <tier> |
给予指定生物群系和等级的生物群系药水。 示例: /capturebiomes givebiomepotion snowy_taiga 3 |
OP |
/capturebiomes reloadconfig |
重新加载插件的配置 (config.yml)。 |
OP |
/capturebiomes resetconfig |
重置插件的配置 (config.yml) 并自动重新加载它。 |
OP |
/capturebiomes help |
在游戏中显示此指令概览。 |
OP |
/biome |
显示你当前所在的生物群系。 |
所有人 |
支持的版本
本插件支持 Minecraft 1.21.5 及以上版本。我不建议在较低版本上使用此插件,因为它尚未经过官方测试——尽管它可能仍然可以工作。
请记住,我是在业余时间开发和维护此插件的,因此对新 Minecraft 版本的更新可能会有延迟。
配置
编辑插件文件夹中的 config.yml 以适应你的偏好:
# =========================================
# Capture Biomes - Configuration
# =========================================
enabled: true # 启用/禁用插件功能
# =========================================
# Beacon Settings
# =========================================
beacon:
# 每个信标等级所需的物品数量
# 必须 > 0 且 <= trigger_item 的最大堆叠数
required-item-count:
tier-1: 16
tier-2: 32
tier-3: 48
tier-4: 64
# 生物群系药水的范围(NxN 区域)
# 必须 > 0
biome-potions-size:
tier-1: 4
tier-2: 8
tier-3: 16
tier-4: 32
# 生物群系扩散的垂直范围(倍数)
# 决定生物群系延伸的程度:
# - 在撞击点 **下方**
# - 在中心 Y 轴的第一个固体方块 **上方**
# 实际范围(上下)通过将药水的基础大小乘以该倍数来计算
# 必须是一个 >= 0.0 且 <= 5.0 的浮点数
# 将此设置为 0.0 将完全禁用垂直偏移
y-offset-multiplier: 1.0
trigger_item: EXPERIENCE_BOTTLE # 用于触发仪式的物品
biome-potions-amount: 1 # 每次获得的药水数量 (> 0)
# =========================================
# 生物群系药水设置
# =========================================
# 已生成的药水不受影响
potion-cooldown:
enabled: true # 启用冷却时间
length: 15 # 秒数 (> 0)
# =========================================
# 生物群系开关
# =========================================
biomes:
enable-mushroom_fields: false
enable-deep_dark: false
# =========================================
# 高级设置 – 仅在您了解其含义时修改!
# 配置错误可能会导致插件损坏或出现意外行为。
# =========================================
console:
enable-logging: true
enable-additional-logging: false # 额外的调试日志
item-check:
timeout-ticks: 200 # 总持续时间(20 ticks = 1秒)
interval-ticks: 2 # 检查间隔
bstats:
enabled: true
重置配置文件
若要将插件的配置重置为默认值,请使用 /capturebiomes resetconfig 命令,或删除插件文件夹中的 config.yml 并重启服务器。
支持的生物群系和维度
本插件支持大多数 主世界生物群系(如下所列)。
下界和末地的生物群系以及自定义生物群系和维度目前尚不支持,将被忽略。
? 寒冷
Deep Cold Ocean, Cold Ocean, Snowy Tundra, Snowy Plains, Snowy Slopes, Snowy Beach, Snowy Taiga, Ice Spikes, Frozen Peaks, Frozen Ocean, Frozen River, Deep Frozen Ocean
? 炎热
Desert, Savanna, Savanna Plateau, Badlands, Eroded Badlands, Wooded Badlands, Windswept Savanna, Beach
? 森林 / 平原
Forest, Birch Forest, Dark Forest, Flower Forest, Old Growth Birch Forest, Old Growth Pine Taiga, Old Growth Spruce Taiga, Windswept Forest, Grove, Taiga, Meadow, Cherry Grove, Sunflower Plains, Plains, Pale Garden, Dappled Forest
? 丛林
Jungle, Bamboo Jungle, Sparse Jungle
? 海洋 / 河流
Ocean, Deep Ocean, Warm Ocean, Lukewarm Ocean, Deep Lukewarm Ocean, River
? 沼泽
Swamp, Mangrove Swamp
⚪ 山脉 / 岩石
Stony Peaks, Stony Shore, Jagged Peaks, Windswept Gravelly Hills, Windswept Hills
⚫ 洞穴 / 地下
Lush Caves, Dripstone Caves, Deep Dark(默认禁用,可在配置文件中配置)
? 其他
Mushroom Fields(默认禁用,可在配置文件中配置)
帮助
如果您需要任何帮助,请随时提交 Issue:Open an issue
bStats
本插件使用 bStats 来收集 匿名统计信息,如玩家数量和服务器版本。
所有收集的数据都是 匿名且安全的,有助于改进插件。
如果您不希望插件发送数据,请在 config.yml 中禁用 bStats。
许可证
本插件遵循 GNU General Public License v3 许可。
- 您可以自由地 使用、修改和重新分发 本插件,但需遵守相同的 GPLv3 许可协议。
- 严禁 在未进行适当修改的情况下 上传或分享 本插件。
- 您必须始终 注明原作者。
- 更多信息,请参阅完整许可协议:GNU GPL v3
鸣谢
由 REDcrafterM 开发
Capture Biomes
Ever dreamed of bringing a snowy tundra to your sunny desert world? Or maybe turn your forest into a swampy wonderland?
With Capture Biomes, you can bottle up any biome and unleash it anywhere –
reshape your own Minecraft world exactly the way you want!
Features
? Capture any biome in a Biome Potion using a Beacon
? Potion colors, names, and descriptions match the captured biome
? Bigger Biome Potions depending on the Beacon pyramid size
⚙️ Full configuration support in the config.yml
Usage
- Place a Beacon and power it with the usual pyramid
- Drop the required amount of XP bottles on top of the beacon:
- Tier 1 Beacon + 16 XP bottles → 4x4 Biome Potion
- Tier 2 Beacon + 32 XP bottles → 8x8 Biome Potion
- Tier 3 Beacon + 48 XP bottles → 16x16 Biome Potion
- Tier 4 Beacon + 64 XP bottles → 32x32 Biome Potion
- The beacon automatically creates a Biome Potion of the biome in which the beacon is located
- Throw the potion on the ground in another biome to change the biome in the area
The tier of the Beacon depends on the size of the pyramid:
- 1 layer → Tier 1
- 2 layers → Tier 2
- 3 layers → Tier 3
- 4 layers → Tier 4
Installation
- Download the latest .jar from Modrinth or GitHub
- Place it in your server's
plugins folder
- (Optional) Configure the plugin via
config.yml and restart the server or use the plugin's reload command
Potion Size
The size of a Biome Potion depends on the tier of the beacon used to create it.
When thrown, the potion affects a cuboid of size × size × size blocks, size being the matching value for the Beacon tier (configurable in the config.yml).
Example: A potion created on a tier 2 Beacon affects an area of 8 × 8 × 8 blocks, with the location where the potion lands as the center.
Height behavior:
- If there is a solid block above the center coordinate (e.g. in a cave), the biome extends up to
size blocks above that block.
- If there is no solid block above the center, the biome extends up to the world's maximum height.
- The biome always extends
size blocks below the point where the potion lands.
- The amount of blocks to extend up- and downwards is configurable in the config.yml by modifying the
y-offset-multiplier.
Commands
| Command |
Description |
Permission |
/capturebiomes disable |
Disables the plugin. |
OP |
/capturebiomes enable |
Enables the plugin. |
OP |
/capturebiomes version |
Shows the current plugin version in the ingame chat and checks for updates. |
OP |
/capturebiomes givebiomepotion <biome> <tier> |
Gives a Biome Potion of the specified biome and tier. Example: /capturebiomes givebiomepotion snowy_taiga 3 |
OP |
/capturebiomes reloadconfig |
Reloads the plugin’s configuration (config.yml). |
OP |
/capturebiomes resetconfig |
Resets the plugin’s configuration (config.yml) and automatically reloads it. |
OP |
/capturebiomes help |
Shows this command overview in the ingame chat. |
OP |
/biome |
Shows the biome you are currently standing in. |
Everyone |
Supported Versions
This plugin supports Minecraft version 1.21.5 and above. I don't recommend to use this plugin on lower versions, as it hasn't been officially tested - though it might still work.
Please keep in mind that I develop and maintain this plugin in my spare time, so updates to new Minecraft versions may be delayed.
Config
Edit the config.yml in the plugin's folder to adapt it to your preferences:
# =========================================
# Capture Biomes - Configuration
# =========================================
enabled: true # Enable/disable plugin functionality
# =========================================
# Beacon Settings
# =========================================
beacon:
# Required items per beacon tier
# Must be > 0 and <= max stack size of trigger_item
required-item-count:
tier-1: 16
tier-2: 32
tier-3: 48
tier-4: 64
# Size of biome potions (NxN area)
# Must be > 0
biome-potions-size:
tier-1: 4
tier-2: 8
tier-3: 16
tier-4: 32
# Vertical range of biome spread (multiplier)
# Determines how much the biome extends:
# - BELOW the impact point
# - ABOVE the first solid block at the center's y-axis
# The actual range (up and down) is calculated by multiplying the base size of the potion by this multiplier
# Must be a floating-point number >= 0.0 and <= 5.0
# Setting this to 0.0 will completely disable the vertical offset
y-offset-multiplier: 1.0
trigger_item: EXPERIENCE_BOTTLE # Item used to trigger the ritual
biome-potions-amount: 1 # Amount of potions to get each time (> 0)
# =========================================
# Biome Potion Settings
# =========================================
# Already created potions are NOT affected
potion-cooldown:
enabled: true # Enable cooldown
length: 15 # Seconds (> 0)
# =========================================
# Biome Toggles
# =========================================
biomes:
enable-mushroom_fields: false
enable-deep_dark: false
# =========================================
# Advanced Settings – only modify if you know what you're doing!
# Misconfiguring these could potentially break the plugin or cause unexpected behavior.
# =========================================
console:
enable-logging: true
enable-additional-logging: false # Extra debug logs
item-check:
timeout-ticks: 200 # Total duration (20 ticks = 1s)
interval-ticks: 2 # Check interval
bstats:
enabled: true
Resetting the config
In order to reset the plugin's config to its default values, either use the /capturebiomes resetconfig command or delete the config.yml in the plugin's folder and restart the server.
Supported Biomes and Dimensions
This plugin supports most overworld biomes (listed below).
Nether and End biomes as well as custom biomes and dimensions are currently not supported and will be ignored.
? Cold
Deep Cold Ocean, Cold Ocean, Snowy Tundra, Snowy Plains, Snowy Slopes, Snowy Beach, Snowy Taiga, Ice Spikes, Frozen Peaks, Frozen Ocean, Frozen River, Deep Frozen Ocean
? Hot
Desert, Savanna, Savanna Plateau, Badlands, Eroded Badlands, Wooded Badlands, Windswept Savanna, Beach
? Forest / Plains
Forest, Birch Forest, Dark Forest, Flower Forest, Old Growth Birch Forest, Old Growth Pine Taiga, Old Growth Spruce Taiga, Windswept Forest, Grove, Taiga, Meadow, Cherry Grove, Sunflower Plains, Plains, Pale Garden, Dappled Forest
? Jungle
Jungle, Bamboo Jungle, Sparse Jungle
? Oceans / Rivers
Ocean, Deep Ocean, Warm Ocean, Lukewarm Ocean, Deep Lukewarm Ocean, River
? Swamps
Swamp, Mangrove Swamp
⚪ Mountains / Stony
Stony Peaks, Stony Shore, Jagged Peaks, Windswept Gravelly Hills, Windswept Hills
⚫ Caves / Underground
Lush Caves, Dripstone Caves, Deep Dark (disabled by default, configurable in config)
? Other
Mushroom Fields (disabled by default, configurable in config)
Help
If you need any help, please feel free to open an issue: Open an issue
bStats
This plugin uses bStats to collect anonymous statistics like player counts and server versions.
All data collected is anonymous and secure, helping to improve the plugin.
If you don't want the plugin to send data, disable bStats in the config.yml.
License
This plugin is licensed under the GNU General Public License v3.
- You are free to use, modify, and redistribute the plugin under the same GPLv3 license.
- Uploading or sharing the plugin without proper modifications is strictly prohibited.
- You must always provide credit to the original author.
- For more information, see the full license: GNU GPL v3
Credits
Developed by REDcrafterM
评论 0
登录后参与评分
还没有评论,来抢沙发吧