欢迎来到全新的区域保护方式!ChunkProtection 是一款简单的区域保护插件,允许玩家无需使用“权杖”、“被栅栏包围的大片区域”、“告示牌”或复杂命令即可保护自己的领地!玩家可以轻松添加/移除其保护区域内的成员,而无需修改告示牌或输入复杂的命令!继续阅读以了解更多信息!
功能:
简单易用的区域保护!
添加/移除成员!
供参考的用户命令!
用于维护的管理员命令!
更多功能即将推出!
要求:
必须配备 MySQL 数据库!!还需要一个权限插件!
使用方法:
如何认领区域:
放置一个栅栏!就是这么简单!栅栏所在的区块(chunk)将被保护为你所有!(区块是预定义的从基岩到天空上限的 16x16 区域!)
如何取消认领区域:
1) 站在你想要取消认领的保护区域内。
2) 手中拿一根木棍。
3) 破坏一个栅栏!在持有木棍的情况下破坏你区域内的栅栏,即可取消该区域的认领!
如何添加成员:
1) 站在你想要添加成员的保护区内。(你想添加的玩家也必须站在那里)
2) 手中拿一根木棍。
3) 用你手中的木棍击打你想添加为成员的球员!哈哈
如何移除成员:
1) 站在你想要移除成员的保护区内。(你想移除的玩家也必须站在那里)
2) 手中拿一根骨头。
3) 用你手中的骨头击打你想移除的成员!哈哈(如果其他玩家不配合,管理员也可以使用命令移除成员)
安装方法:
1) 下载。
2) 停止服务器,然后将 ChunkProtection.jar 添加到服务器的 plugin 文件夹中。
3) 启动服务器,然后再次停止服务器。(此时会出现 MySQL 连接问题,插件将无法启用)
4) 编辑 plugins 文件夹中 ChunkProtection 目录下的 config.yml。将 database、user 和 password 节点更改为你的 MySQL 数据库对应的值。
5) 启动你的服务器!完成。
配置方法:
1) 编辑 config.yml 以满足你的需求!
host: 这是你的 MySQL 数据库的主机地址,如果你的 MySQL 服务器与 Minecraft 服务器在同一台计算机上运行,请保留为 localhost。
port: 这是用于与 MySQL 数据库通信的监听端口。除非你是有经验的管理员并知道自己在做什么,否则请保留为 3306!!!!
database: 在此处放入你的数据库名称。
user: 在此处放入希望连接到你的数据库的用户名。
password: 在此处放入你所命名用户的密码。
maxChunks: 这是单个玩家同时可以拥有的最大区块数(16x16 区域)。
allowFire: 如果你希望允许火焰(任何形式,由任何来源引起)出现在保护区域内,请设为 true。(这并不意味着保护整个服务器免受火灾影响!仅适用于由 ChunkProtection 保护的地区)。如果不希望允许火焰,请设为 false。
blockCreeperExplosion: 如果你希望 ChunkProtection 阻止由苦力怕爆炸导致的方块错误放置,请设为 true。(仅在发生在由 ChunkProtection 保护的区域内时生效!)。如果你希望允许苦力怕爆炸导致方块错误放置,请设为 false。(不会阻止伤害发生)。
allowBucketFill: 如果你不希望非所有者或非成员玩家在受保护区域内装满水桶,请设为 false。如果你不介意,请设为 true。
注意!!!! - 如果你使用任何其他反破坏插件,请将 allowFire 设为 true,将 blockCreeperExplosion 设为 false,并将 allowBucketFill 设为 true。
2) 将 ChunkProtection.user 权限赋予任何希望允许使用该插件的人。将 ChunkProtection.admin 权限赋予任何希望允许使用 ChunkProtection 命令删除部分的人。
权限:
ChunkProtection.user
这是基本权限节点。将其授予任何希望允许使用该插件的人。
ChunkProtection.admin
这是一个面向服务器管理员/监督员的权限节点。将其授予任何希望允许使用 ChunkProtection 命令删除部分的人。
命令:
/cp show owner
显示你当前站立位置的区块的所有者。
/cp show members
显示你当前站立位置的区块的所有成员。
/cp delete chunk
删除你当前站立位置的土地上的保护。
/cp delete member [playerName]
将从你当前站立位置的土地的成员列表中删除指定玩家。
未来改进:
iConomy 支持!
SQLite 支持!
使用经验值购买区块选项!
Welcome to the new way to protect your area! ChunkProtection is a simple region protection plugin that allows players to protect their own area without using "wands" , "large areas surrounded in fence" , "signs" or commands!!!! Players can easily add/remove members from their protections without modifying a sign or putting in some complicated command! Read on for more info!
Features:
Easy-To-Use area protection!
Add/Remove members!
User Commands for reference!
Admin Commands for maintainance!
More To Come!
Requirements:
A MySQL database is required!! A permissions plugin is also required!
How To Use:
To Claim an Area:
Place a fence down! It's that easy! The chunk that the fence is placed in will be protected as yours! (a chunk is a predefined 16x16 area from bedrock to skylimit!)
To UnClaim an Area:
1) Stand in the protected area you wish to unclaim.
2) Put a stick in your hand.
3) Break a fence! By breaking a fence while holding a stick in your area, you will unclaim that area!
To Add a Member:
1) Stand in the protected area you wish to add a member to. (the player you want to add must stand there too)
2) Put a stick in your hand.
3) Hit the player you wish to add as a member with the stick you are holding! lol
To Remove a Member:
1) Stand in the protected area you wish to remove a member from. (the player you want to remove must stand there too)
2) Put a bone in your hand.
3) Hit the player you wish to remove as a member witht he bone you are holding! lol (admin can also remove the member by use of commands if the other player is being uncooperative)
How To Install:
1) Download.
2) Stop your server, then add the ChunkProtection.jar into your server's plugin folder.
3) Start your server, then Stop your server. (There will be MySQL connection issues and plugin will not enable)
4) Edit the config.yml inside of the ChunkProtection directory inside of your plugins folder. Change the database, user, and password nodes to match that of your MySQL database.
5) Start Your Server! DONE.
How To Configure:
1)Edit the config.yml to match your needs!
host: this is host of your MySQL database, leave it as localhost if you are running your MySQL server on the same computer as your minecraft server.
port: this is the listening port used to talk back and forth to your MySQL database. Leave as 3306 unless you are an experienced admin and know what you are doing!!!!
database: put the name of your database here.
user: put the name of the user you wish to connect to your database with.
password: put the password used by the user you named.
maxChunks: this is the maximum amount of chunks (16x16 areas) a single player can own at one time.
allowFire: put true if you want fire(by any form, and caused by any source) to be allowed on protections. (does NOT protect the entire server from fire! only areas protected by ChunkProtection). put false if you do not want fire to be allowed.
blockCreeperExplosion: put true if you want ChunkProtection to stop block misplacement caused by creeper explosions. (only stops it if it occurs on areas protected by ChunkProtection!). put false if you want blocks to be misplaced by creeper explosions. (does not stop damage caused).
allowBucketFill: put false if you do not want players that are not the Owner or Members of the protection to be allowed to fill their buckets on protected areas. put true if you don't mind.
Attention!!!! - if you use any other grief protection plugin, put true on allowFire, put false on blockCreeperExplosion, and true on allowBucketFill.
2) add the ChunkProtection.user permission to whoever you want to allow to use this plugin. add the ChunkProtection.admin permissions to whoever you want to allow to use the delete portion of ChunkProtection Commands.
Permissions:
ChunkProtection.user
This is the basic permission node. Give this to anyone you want to be allowed to use this plugin.
ChunkProtection.admin
This is a permission node aimed at server admin/mod. Give this to anyone you want to be allowed to use the delete portion of ChunkProtection commands.
Commands:
/cp show owner
this shows the owner of the chunk you are standing on.
/cp show members
this shows all the members of the chunk you are standing on.
/cp delete chunk
this deletes the protection from the land that you are standing on.
/cp delete member [playerName]
this will delete the player from the members list from the land that you are standing on.
Future Improvements:
iConomy Support!
SQLite Support!
Buy chunks with XP option!
评论 0
登录后参与评分
还没有评论,来抢沙发吧