❄️ EZvac | 逼真的暖通空调与室内气候模拟
EZvac 是一款轻量级、独立的 Paper & Purpur 1.21.1 服务器插件,用于模拟暖通空调(HVAC)和室内气候系统。它为您的 Minecraft 服务器带来了逼真的 3D 管道气流、动态室温建模、变速热泵、基于告示牌的恒温器以及实时预计到达时间(ETA)显示!
与简单的静态半径插件不同,EZvac 模拟了空气在相连房间体积中的实际传播、室外昼夜温度循环以及压缩机转速的渐进变化。
✨ 主要功能
- ? 3D 管道气流模拟: 空气通过通风口(铁活板门)、敞开的门和房间体积进行动态传播,使用基于刻预算的 3D 寻路图算法。
- ?️ 智能告示牌恒温器: 显示实时室内温度、设定目标值、当前运行模式(制冷 / 制热 / 空闲 / 关闭)、设备负载百分比以及动态 ETA 预测。
- ⚙️ 变速设备:
- ? 热泵: 基于投掷器的变速制冷与制热。
- ❄️ 空调: 基于投掷器的变速制冷。
- ? 熔炉: 固定容量的高热量熔炉单元。
- ?️ 运行配置文件(节能、正常、涡轮): 通过壁挂式设置面板自定义系统速度、噪音和能源输出。
- ☀️ 昼夜气候与生物群系: 室外环境温度根据世界时间和生物群系(雪地、沙漠、下界、末地、温带)动态变化。
- ? 诊断与监控设备:
- 点式温度计: 独立告示牌传感器,测量局部方块/通风口的温度。
- RPM 监视器: 实时 RPM 仪表盘,显示压缩机马达速度和活跃容量。
- 设置面板: 交互式配置文件切换器(节能 / 正常 / 涡轮)。
- ? 物品与背包安全: 注册的设备消耗 零 燃料、水桶或背包物品。EZvac 仅管理它创建的流体输出源。
?️ 入门指南
- 放置一个告示牌 作为您的恒温器控制器位置。
- 创建恒温器:
/hvac create thermostat <id> <group> [targetF]
(面向告示牌)
- 注册设备:
/hvac create equipment <group> <heat_pump|ac|furnace>
(面向投掷器)
- 注册通风口:
/hvac create vent <group>
(面向铁活板门)
- 直接通过告示牌交互或
/hvac 命令调整温度或配置文件设置!
?️ 运行配置文件
| 配置文件 |
最大压缩机 RPM |
最大制冷/制热容量 |
| ? 节能 (Eco) |
2,400 RPM |
70% |
| ⚡ 正常 (Normal) |
3,600 RPM |
100% |
| ? 涡轮 (Turbo) |
4,200 RPM |
115% |
? 命令与权限
命令
/hvac help — 查看游戏内命令参考。
/hvac list — 列出服务器上所有已注册的 HVAC 设备。
/hvac stats — 查看实时气流节点预算和系统性能。
/hvac create <device> — 注册恒温器、设备、通风口、温度计和面板。
/hvac remove — 移除目标 HVAC 设备。
/hvac set <id> <targetF> — 设置恒温器目标温度。
权限
ezvac.use (默认: true) — 读取告示牌显示、使用帮助命令以及操作设置面板。
ezvac.admin (默认: op) — 完全行政控制(创建、删除、编辑和诊断系统)。
⚙️ 技术要求
- 服务端软件: Paper、Purpur 或兼容的 1.21.1 分支版本
- Java 版本: Java 21+
- 许可证: 公共领域 / The Unlicense
- GitHub:
❄️ EZvac | Realistic HVAC & Indoor Climate Simulation
EZvac is a lightweight, standalone HVAC and indoor-climate simulation plugin for Paper & Purpur 1.21.1. It brings realistic 3D ducted airflow, dynamic room temperature modeling, variable-speed heat pumps, sign-based thermostats, and live ETA displays to your Minecraft server!
Unlike simple static radius plugins, EZvac models actual air propagation through connected room volumes, outdoor diurnal temperature cycles, and compressor RPM ramping.
✨ Key Features
- ? 3D Ducted Airflow Simulation: Air propagates dynamically through vents (iron trapdoors), open doors, and room volumes using a tick-budgeted 3D pathfinding graph.
- ?️ Smart Sign Thermostats: Displays real-time indoor temperature, setpoint targets, current operating mode (COOL / HEAT / IDLE / OFF), equipment load percentage, and dynamic ETA predictions.
- ⚙️ Variable-Speed Equipment:
- ? Heat Pump: Dispenser-backed variable-speed cooling & heating.
- ❄️ Air Conditioner: Dispenser-backed variable-speed cooling.
- ? Furnace: Fixed-capacity high-heat furnace unit.
- ?️ Operating Profiles (Eco, Normal, Turbo): Customize system speed, noise, and energy output with wall-mounted settings panels.
- ☀️ Diurnal Climate & Biomes: Outdoor ambient temperatures change dynamically based on world time and biomes (Snowy, Desert, Nether, End, Temperate).
- ? Diagnostic & Monitoring Devices:
- Point Thermometer: Standalone sign sensor measuring local block/vent temperature.
- RPM Monitor: Live RPM gauges showing compressor motor speed and active capacity.
- Settings Panel: Interactive profile switcher (Eco / Normal / Turbo).
- ? Item & Inventory Safe: Registered equipment consumes zero fuel, buckets, or inventory items. EZvac only manages fluid output sources it creates.
?️ Getting Started
- Place a Sign where you want your Thermostat controller.
- Create the Thermostat:
/hvac create thermostat <id> <group> [targetF]
(Looking at the sign)
- Register Equipment:
/hvac create equipment <group> <heat_pump|ac|furnace>
(Looking at a Dispenser)
- Register Vents:
/hvac create vent <group>
(Looking at an Iron Trapdoor)
- Adjust temperatures or profile settings directly via sign interaction or
/hvac commands!
?️ Operating Profiles
| Profile |
Max Compressor RPM |
Max Cooling/Heating Capacity |
| ? Eco |
2,400 RPM |
70% |
| ⚡ Normal |
3,600 RPM |
100% |
| ? Turbo |
4,200 RPM |
115% |
? Commands & Permissions
Commands
/hvac help — View in-game command reference.
/hvac list — List all registered HVAC devices on the server.
/hvac stats — View real-time airflow node budget and system performance.
/hvac create <device> — Register thermostats, equipment, vents, thermometers, and panels.
/hvac remove — Remove the targeted HVAC device.
/hvac set <id> <targetF> — Set thermostat target temperature.
Permissions
ezvac.use (Default: true) — Read sign displays, use help commands, and operate settings panels.
ezvac.admin (Default: op) — Full administrative control (create, remove, edit, and diagnose systems).
⚙️ Technical Requirements
- Server Software: Paper, Purpur, or compatible 1.21.1 forks
- Java Version: Java 21+
- License: Public Domain / The Unlicense
- GitHub:
评论 0
登录后参与评分
还没有评论,来抢沙发吧