对于 1.4.5-R0.3 及更高版本,所有使用 NMS/OBC 的插件将锁定为其编译时对应的 Minecraft 版本,因此每次 Minecraft 更新后,您都需要等待插件更新。谢谢!
版本 1.0.5、1.0.6 和 1.0.6a 拥有完全相同的功能,只是针对不同的发布版本(感谢 Bukkit!/讽刺)。
JumpPlus 是一个专为允许玩家进行二段跳(或多段跳)而设计的插件。
所有参数均可配置:包括垂直和水平速度、最大跳跃次数、免费跳跃的最大次数以及跳跃消耗(饥饿值)。您可以轻松实现月球般的跳跃效果,或者仅获得刚好能攀爬两个方块高度的二段跳能力。
配置文件中的默认值旨在提供与冲刺跳跃基本匹配的水平速度(即直线前进 3 个方块),以及能够实现二段跳跨越两个方块高度(叠加在另一个方块之上)的垂直速度。
使用方法
- 正常起跳。
- 面朝下一次跳跃的方向,并按住 Shift 键。
- 可重复步骤 2,次数由 config.yml 设定。但请注意:如果您在空中悬停时间过长且服务器不允许飞行,您将被踢出服务器。
命令
- /jptoggle:为指定玩家启用或禁用该插件。
- /jpreload:重新加载 config.yml 和基于权限的设置
权限
- jumpplus.*:授予用户插件中的所有功能。
- jumpplus.bypass.*:授予用户所有功能,且无惩罚或限制。
- jumpplus.use:允许用户使用二段跳(或多段跳)。- 默认为 true
- jumpplus.reload:允许用户重载插件。- 默认为 OP(管理员)
- jumpplus.bypass.food:允许用户无消耗跳跃。- 默认为 OP
- jumpplus.bypass.limit:允许用户无限次跳跃。- 默认为 OP
- jumpplus.bypass.gravity:允许用户在二段跳时不受坠落伤害。默认为 OP。
配置说明
- speed.horizontal:跳跃的水平速度。接受整数或小数格式。
- speed.vertical:跳跃的垂直速度。接受整数或小数格式。
- maxJumps:玩家可使用跳跃的最大次数。第一次普通跳跃不计入在内。接受整数格式。
- maxFreeJumps:玩家可免费使用的最大跳跃次数。接受整数格式。如果由于某些原因此值高于 maxjumps,则 maxfreejumps 将等于 maxjumps。
- jumpCost:“maxfreejumps”之上的跳跃消耗。消耗单位为饥饿值点数(1 点 = 0.5 饥饿值)。接受整数格式。
- fallModifier:设置坠落距离修正系数。正值表示减少坠落伤害,负值表示增加坠落伤害。接受整数。
- particleEffect:设置是否在二段跳时显示视觉粒子效果。接受布尔值。
- reloadTimer:设置基于权限的配置更新之间的延迟时间(以分钟为单位)。设为 0 以禁用。接受整数
- 设置插件的默认状态(可通过游戏内的 /jptoggle 更改)。true 表示启动时启用,false 表示启动时禁用。接受布尔值
权限配置
- 将以下节点添加到玩家或组中,其中 configName 必须严格对应上述名称(全部小写):
jumpplus.config.<configName>-<setting>
- 通过 /jpreload 命令、reloadTimer 计时器或重启服务器来重载配置
示例
- jumpplus.config.maxjumps-6
- jumpplus.config.vspeed-1.15
- jumpplus.config.particleeffect-true
本插件应 Bukkit 论坛上的请求制作。
For 1.4.5-R0.3 and beyond all plugins using NMS/OBC will be locked to the MC version it was compiled for, so you'll have to wait a plugin update every time mc updates. Thank you!
Versions 1.0.5, 1.0.6 and 1.0.6a all have the SAME features, just for different releases (thanks bukkit! /sarcasm).
JumpPlus is a plugin purely designed for allowing double (or multiple) jumping.
Everything is configurable: both vertical and horizontal speeds, maximum number of jumps, maximum number of free jumps and jump cost(in hunger). In you can easily make a moon jump or a double jump just enough to climb two blocks.
The default values on the config are for a horizontal speed that basically matches the sprinting jump(3 blocks straight), and vertical velocity to double jump two blocks (on top of the other).
Usage
- Jump normally.
- Face the direction of the next jump, and press Shift.
- Can repeat 2. as many times the config.yml says, but be careful: if you stay hovering in the air for too long and server doesn't allow flying, you'll get kicked.
Commands
- /jptoggle: Enable/Disable the plugin for the selected player.
- /jpreload: Reload config.yml and permission based settings
Permissions
- jumpplus.*: Grants user all abilities in the plugin.
- jumpplus.bypass.*: Grants user all abilities without penalty or limit.
- jumpplus.use: Allow user to use double (multiple) jump. - defaults to true
- jumpplus.reload: Allow user to reload the plugin. - defaults to OP
- jumpplus.bypass.food: Allow user to jump without cost. - defaults to OP
- jumpplus.bypass.limit: Allow user to jump indefinitely. - defaults to OP
- jumpplus.bypass.gravity: Allow user to double jump with no fall damage. Defaults to OP.
Configuration
- speed.horizontal: Horizontal speed of the jump. Accepts integer or decimal format.
- speed.vertical: Vertical speed of the jump. Accepts integer or decimal format.
- maxJumps: Maximum number of jumps a player can use. The first, normal jump doesn't count. Accepts integer format.
- maxFreeJumps: Maximum number of jumps a player can use without cost. Accepts integer format. If this for some reason is higher than maxjumps then maxfreejumps = maxjumps.
- jumpCost: Cost of jumps above "maxfreejumps". Costs are in hunger value (1 point = 0.5 hunger). Accepts integer format.
- fallModifier: Set the fall distance modifier. Positive means less fall damage, negative means more fall damage. Accepts integer.
- particleEffect: Set whether to show visual particles on double jump or not. Accepts boolean.
- reloadTimer: Set the delay between permission based config updates (in minutes). 0 to disable. Accepts integer
- Set the default state of the plugin (can be changed ingame with /jptoggle). True to start it enabled, false to start it disabled. Accepts boolean
Permission Configurations
- Add the following node to a player/group, where configName is exactly the name described above (all lowercase):
jumpplus.config.<configName>-<setting>
- Reload with /jpreload, with the reloadTimer or by reloading the server
Examples
- jumpplus.config.maxjumps-6
- jumpplus.config.vspeed-1.15
- jumpplus.config.particleeffect-true
Plugin made by request on Bukkit forums.
下载 JumpPlus
下载 JumpPlus
下载 JumpPlus
下载 JumpPlus
下载 JumpPlus
下载 JumpPlus
下载 JumpPlus
下载 JumpPlus
下载 JumpPlus
确保在 PlayerToggleSneakEvent 中 jumpPlayer 不为 null,以防插件未能提前创建玩家。
由于 此原因,除 1.4.6(所有版本)外,无法与其他 CraftBukkit 版本兼容。
关于这个资源的讨论、问题反馈与使用心得
还没有讨论,来发第一帖吧
你是这个资源的作者?登录后可认领此资源。
相似资源
插件
重新定义服务器上的生物运输方式。使用高度可定制的口袋道具,安全地捕获、存储和释放任何实体。
插件
使床在所有维度中爆炸的模组
插件
为 Armor Poser 模组添加兼容性
插件
SkyBlock、OneBlock、Boxed、SkyGrid、AcidIsland、CaveBlock、Poseidon、StrangerRealms——以及更多!这些只是由 BentoBox 支持的基于岛屿的游戏模式之一。来自原版 ASkyBlock 的作者。
插件
一个高度兼容、功能完善且稳定的 TPA 模组
插件
AbAcc AbAcc 是一款适用于 Minecraft 服务器的管理插件,可简化玩家作弊检测与举报管理工作。工作人员可以发起并管理对可疑玩家的检查流程,并在检查完成后将其释放。
评论 0
登录后参与评分
还没有评论,来抢沙发吧