需要为你的服务器增添装饰吗?厌倦了手动建造玩家雕像了吗?有点自恋?如果你对上述任何问题回答了“是”,那么这个玩家雕像生成器就是为你量身打造的!
安装方法
- 下载下方的 .jar 文件(如果你使用的是 Minecraft 1.19 及更早版本,请下载插件版本 1.13)
- 将 .jar 文件移动到你 spigot/bukkit/craftbukkit 等服务器文件夹中的 "plugins" 文件夹内
- 重启你的服务器
- 输入
/statue USERNAME 为指定的用户名生成雕像
基础用法
- 用法:
/statue USERNAME [glass|concrete|terracotta|planks|gray|wool] [default|slim|legacy] [xy|xz|yz] [iron_armor|diamond_armor|chainmail_armor|golden_armor] [left_leg|right_leg|body|head|left_arm|right_arm] [hue:0-1|saturation:0-1|brightness:0-1|contrast:0-1|posterize:LEVEL] [quote] [converter:<rgb|lab|absrgb|hsl|hsb>]
- 控制台/命令方块用法:
/statue USERNAME x:[x coord] y:[y coord] z:[z coord] direction:[North|South|East|West] world:[world] [glass|concrete|terracotta|planks|gray|wool] [default|slim|legacy] [xy|xz|yz] [iron_armor|diamond_armor|chainmail_armor|golden_armor] [left_leg|right_leg|body|head|left_arm|right_arm] [hue:0-1|saturation:0-1|brightness:0-1|contrast:0-1|posterize:LEVEL] [converter:<rgb|lab|absrgb|hsl|hsb>]
- 用法:
/undostatue (管理员) 你现在不仅可以撤销上一次的雕像操作了!
- 用法:
/clearskincache (管理员) 清除缓存的皮肤图片(每 20 分钟自动运行一次)
示例
| 示例 |
命令 |
描述 |
| EXAMPLE 1 |
/statue [USERNAME] glass |
仅使用玻璃制作雕像 |
| EXAMPLE 2 |
/statue [USERNAME] concrete |
仅使用混凝土制作雕像 |
| EXAMPLE 3 |
/statue [USERNAME] terracotta planks |
仅使用陶瓦和木板制作雕像 |
| EXAMPLE 4 |
/statue [USERNAME] gray |
制作灰度雕像 |
| EXAMPLE 5 |
/statue [USERNAME] slim gray |
制作具有 slim 皮肤格式(3px 臂宽)的灰度雕像 |
| EXAMPLE 6 |
/statue [USERNAME] wool xz |
仅使用羊毛制作雕像。由于 xz 参数,雕像呈躺卧姿态 |
| EXAMPLE 7 |
/statue [USERNAME] diamond_armor concrete |
制作带有钻石盔甲的雕像,且仅由混凝土构成 |
| EXAMPLE 8 |
/statue [USERNAME] wool glass chainmail_helmet iron_chestplate golden_boots |
制作带有锁链头盔、铁胸甲和金靴子的雕像,且仅由羊毛和玻璃构成 |
| EXAMPLE 9 |
/statue [USERNAME] head right_arm slim |
仅制作雕像的头部和右臂组件,并使用细手臂模型(用于分部分构建雕像) |
| EXAMPLE 10 |
/statue [USERNAME] hue:.2 contrast:.3 posterize:3 saturation:.4 brightness:.5 |
将图像色相偏移 .2,对比度设为 .3(降低对比度),以 3 个层级对图像进行色调分离,饱和度降至 .4,亮度降至 .5 |
| CONSOLE EXAMPLE 11 |
/statue [USERNAME] x:-593 y:32 z:269 direction:North world:world |
仅限控制台/命令方块;在指定坐标和世界位置构建雕像 |
| CONSOLE EXAMPLE 12 |
/statue [USERNAME] x:-593 y:32 z:269 direction:North world:world hue:.34 posterize:3 wool |
仅限控制台/命令方块;在指定坐标和世界位置构建雕像,并应用相关参数 |
| EXAMPLE 13 |
/statue [USERNAME] converter:lab |
基于 LAB 色彩空间进行颜色到方块的转换,可能会产生更准确的颜色 |
| EXAMPLE 14 |
/statue [USERNAME] converter:rgb |
基于 RGB 色彩空间进行颜色到方块的转换,这是原始的颜色差异算法 |
功能
- 如果 Mojang API 不可用,插件会尝试连接备用 API 来获取皮肤
- 现在如果手臂宽度小于 4 像素,会自动创建瘦型雕像(无需再输入
slim)
- 支持新型皮肤(袖子、裤腿、夹克等)
- 支持具有 3 像素手臂的
slim皮肤格式
- 支持没有袖子、裤腿或夹克的旧版皮肤
- 因此基本上支持所有皮肤!
- 支持以下方块类型:玻璃、混凝土、陶瓦、木板、灰色系方块、羊毛(也可以混合使用!)
- 默认设置为
default
- 还支持不同的皮肤朝向(躺下、侧卧、站立)
- 例如,如果你想生成一个用户名为 USERNAME、皮肤格式为
slim 且雕像呈躺卧状态的模型,你需要输入 /statue USERNAME slim xz。
- 支持 WorldGuard(即使没有安装 WorldGuard 也能正常工作)!!!
- 支持 Vault(即使没有安装 Vault 也能正常工作)!!!
- 支持 EssentialsX 经济系统(即使没有安装 EssentialsX 也能正常工作)!!!
- 告知玩家建造雕像所需的方块/物品。
- 仅当背包中有未着色/未染色的方块时才允许建造雕像(管理员可绕过此限制),适用于生存/普通玩家,所需材料包括陶瓦、木材、羊毛、混凝土和钻石(钻石消耗量 = 方块数量除以 16)。可配置!
- 采用多线程处理,因此不应导致服务器卡顿
- 旋转雕像使其面向你(支持 4 个方向 + 前述的 xy、xz、yz,共计 12 种朝向!)
- 如果由生存/普通玩家使用,插件不会删除方块——只会修改空气。这可以防止意外修改地形,并消除雕像破坏基岩或其他不应被破坏事物的可能性。
- 雕像会在玩家上方两个方块处生成,以防止窒息。
- 撤销雕像操作仅影响 ANY 玩家创建的最后一个雕像(仅限管理员)
- 现在你可以为玩家雕像添加盔甲(锁链、金色、钻石、铁)!你可以通过指定盔甲类型然后添加
_helmet、_chestplate 或 _boots 来选择一件盔甲(例如:diamond_boots)。
- 插件使用 bStats 进行插件指标统计;不存储任何个人信息,如果你使用 worldedit/essentialsX,则你已经在使用 bStats。你可以通过进入插件文件夹中
bStats 文件夹下的配置文件来选择退出。
- 你现在可以直接从电脑创建玩家雕像(如果你是管理员)。
- 配置文件支持冷却时间(分钟)、额外所需物品及额外物品的数量
如何直接从电脑上的皮肤图片创建雕像
- 获取你的皮肤 .png 文件并复制它
- 前往 Spigot 服务器文件夹中的
plugins 文件夹
- 进入
PlayerStatueBuilderX 文件夹
- 将你的皮肤 .png 文件粘贴到这里。请记住文件名!!!(例如
bestskin.png 或 bestskin)
- 启动服务器
- 输入
/statue .文件名 确保在写入文件名之前加上点号。如果在命令中输入时文件名末尾有 .png,请将其移除。例如:你的文件名为 bestSkinEver.png,那么你应该输入 /statue .bestSkinEver
- 你可以在其后添加
glass、diamond_armor 等,就像普通的皮肤雕像一样来自定义它!
权限
playerstatuebuilderx.createStatue:
description: 允许创建雕像
default: true
playerstatuebuilderx.bypass:
description: 创建雕像,绕过材料要求
default: op
playerstatuebuilderx.specialOrientation:
description: 允许在 xz 和 yz 平面上创建雕像。朝向不可预测,因此仅限管理员!
default: op
playerstatuebuilderx.override:
description: 创建玩家雕像并覆盖方块(通常如果不是空气则跳过)
default: op
playerstatuebuilderx.noWait:
description: 玩家无需等待冷却时间即可制作雕像 - 默认为 5 分钟
default: op
playerstatuebuilderx.undo:
description: 允许玩家撤销服务器上 ANYONE 创建的最后一个雕像(不退还材料)。你必须拥有 "override" 权限才能生效
default: op
playerstatuebuilderx.custom:
description: 玩家可以在前面加 '.' 以从插件的数据文件夹创建自定义雕像
default: true
playerstatuebuilderx.clearCache:
description: 玩家可以运行 /clearskincache
default: op
配置文件说明
# PlayerStatueBuilderX 配置文件
# 对于雕像总方块数下方的数值,需将一种“计费”物品加入总数
# 因此如果比率为 16 且雕像中的总方块数为 512,则玩家需要 512/16 = 32 个“计费”物品(在本例中为钻石)
rate: 16
# 使用命令的冷却时间,单位为分钟(无小数,设为零表示无冷却)。所以 1 表示成功创建雕像(或雕像部件)之间的间隔为 1 分钟。
cooldown: 1
# “rate”决定玩家需要多少额外的这种“计费”物品。例如:EMERALD、REDSTONE、DIAMOND 等。
charge: DIAMOND
# 插件是否需要精确材料(例如:需要 10 个蓝色混凝土和 7 个红色混凝土,而不是 17 个白色混凝土)
exact: false
# 每个放置方块的代价(以 $ 计 - 支持 EssentialsX/Vault)。例如:如果 priceRate 为 2.5,则 1000 块方块的雕像会使成本增加 $2500
priceRate: 0.0
画廊

1.7 示例:
<br>
1.10 示例:

1.17 示例
Need something to decorate your server? Tired of building player statues by hand? A tad bit conceited? If you answered yes to any of these questions, this player statue builder is perfect for you!
Installation
- Download the .jar below (Download plugin version 1.13 if you are using Minecraft version 1.19 and earlier)
- Move the .jar to your "plugins" folder in your spigot/bukkit/craftbukkit etc. server folder
- Restart your server
- Type
/statue USERNAME to generate a statue for the specified USERNAME
Basics
- Usage:
/statue USERNAME [glass|concrete|terracotta|planks|gray|wool] [default|slim|legacy] [xy|xz|yz] [iron_armor|diamond_armor|chainmail_armor|golden_armor] [left_leg|right_leg|body|head|left_arm|right_arm] [hue:0-1|saturation:0-1|brightness:0-1|contrast:0-1|posterize:LEVEL] [quote] [converter:<rgb|lab|absrgb|hsl|hsb>]
- Console/Command Block Usage:
/statue USERNAME x:[x coord] y:[y coord] z:[z coord] direction:[North|South|East|West] world:[world] [glass|concrete|terracotta|planks|gray|wool] [default|slim|legacy] [xy|xz|yz] [iron_armor|diamond_armor|chainmail_armor|golden_armor] [left_leg|right_leg|body|head|left_arm|right_arm] [hue:0-1|saturation:0-1|brightness:0-1|contrast:0-1|posterize:LEVEL] [converter:<rgb|lab|absrgb|hsl|hsb>]
- Usage:
/undostatue (Admin) You can now UNDO more than just your last statue!
- Usage:
/clearskincache (Admin) Clears cached skin images (auto runs every 20 minutes)
Examples
| Example |
Command |
Description |
| EXAMPLE 1 |
/statue [USERNAME] glass |
creates a statue made of glass only |
| EXAMPLE 2 |
/statue [USERNAME] concrete |
creates a statue made of concrete only |
| EXAMPLE 3 |
/statue [USERNAME] terracotta planks |
creates a statue made of only terracotta and wood planks |
| EXAMPLE 4 |
/statue [USERNAME] gray |
creates a grayscale statue |
| EXAMPLE 5 |
/statue [USERNAME] slim gray |
creates a grayscale statue that has the slim skin format (3px arms) |
| EXAMPLE 6 |
/statue [USERNAME] wool xz |
creates a statue made of only wool. The statue is lying down because of the xz parameter |
| EXAMPLE 7 |
/statue [USERNAME] diamond_armor concrete |
creates a statue with diamond armor made only out of concrete |
| EXAMPLE 8 |
/statue [USERNAME] wool glass chainmail_helmet iron_chestplate golden_boots |
creates a statue with a chainmail helmet, iron chestplate, and golden boots, made only out of wool and glass |
| EXAMPLE 9 |
/statue [USERNAME] head right_arm slim |
creates the head and right arm components of the statue only with slim arms (Use this to build a statue in parts) |
| EXAMPLE 10 |
/statue [USERNAME] hue:.2 contrast:.3 posterize:3 saturation:.4 brightness:.5 |
shifts the hue of the image by .2, sets contrast at .3 (decreases contrast), posterizes the image with 3 levels, saturation reduced to .4, brightness reduced to .5 |
| CONSOLE EXAMPLE 11 |
/statue [USERNAME] x:-593 y:32 z:269 direction:North world:world |
console/command block only; builds a statue with the specified coordinates and world |
| CONSOLE EXAMPLE 12 |
/statue [USERNAME] x:-593 y:32 z:269 direction:North world:world hue:.34 posterize:3 wool |
console/command block only; builds a statue with the specified coordinates and world with parameters |
| EXAMPLE 13 |
/statue [USERNAME] converter:lab |
creates a statue with color to block conversion based on the LAB color space which may result in more accurate colors |
| EXAMPLE 14 |
/statue [USERNAME] converter:rgb |
creates a statue with color to block conversion based on the RGB color space which is the original color diff algorithm |
Features
- The plugin attempts to connect to a fallback API to grab skins if the Mojang API is down
- Now automatically creates a slim statue if the arms are less than 4 pixels wide (instead of having to type
slim)
- Supports the new skin type (sleeves, pantlegs, jacket, etc.)
- Supports the
slim skin format with 3 pixel arms
- Supports the older skin type without sleeves, pantlegs, or a jacket
- So it basically supports all skins!
- Supports the following block types: glass, concrete, terracotta, planks, gray-colored blocks, wool (you can combine them too!)
- The default setting is
default
- Also supports different skin orientations (lying down, lying on side, standing up)
- So you would type
/statue USERNAME slim xz if you would like to generate a skin with the user USERNAME, with a skin format of slim, and having the statue laying down.
- WorldGuard Support (also works without WorldGuard)!!!
- Vault Support (also works without Vault)!!!
- EssentialsX Economy Support (also works without EssentialsX)!!!
- Informs the player of what blocks/items are needed to build the statue.
- Allows building of a statue ONLY if the uncolored/undyed blocks are in inventory (Admins bypass this) w/ Terracotta, Wood, Wool, Concrete, and Diamonds (Diamond Cost = number of blocks divided by 16) - for survival/normal players. Configurable!
- Multithreaded so it shouldn't lag your server
- Rotates the statue so that it faces you (Supports 4 directions + the aforementioned xy,xz,yz, so 12 orientations in total!)
- If used by a survival/normal player, the plugin won't delete blocks- only modifies air. This prevents accidental modification of the terrain, and eliminates the possibility that the statue will destroy bedrock or other stuff it shouldn't destroy.
- Spawns the statue two blocks above the player to prevent suffocation.
- Undo-ing a statue affects only the last statue created by ANY player (Admin only)
- You can add armor to your player statues now (chainmail, golden, diamond, iron)! You can select a piece of armor by stating what type of armor and then adding
_helmet , _chestplate , or _boots (ex: diamond_boots).
- The plugin uses bStats for plugin metrics; no personal information is stored and if you use worldedit/essentialsX you already use bStats. You may opt out by going to the configuration file under the
bStats folder in your plugins folder.
- You can now create a player statue DIRECTLY from your computer (if you're an admin).
- Config file supports cooldowns (min), extra items required, and # of extra items required
How to create a statue with a skin image directly from your computer
- Obtain your skin's .png file and copy it
- Go to your
plugins folder in your spigot server folder
- Go to the
PlayerStatueBuilderX folder
- Paste your skin's .png file here. Remember the name of the file!!! (Like
bestskin.png or bestskin)
- Start your server
- Type
/statue .FILENAME Make sure you ADD the period BEFORE you write the name of the file. REMOVE .png at the end of your filename when you type it into the command if you have it. Ex: Your file is named bestSkinEver.png so you would type /statue .bestSkinEver
- You can add
glass diamond_armor etc. after it just like a normal skin statue to customize it!
Permissions
playerstatuebuilderx.createStatue:
description: Allow creation of a statue
default: true
playerstatuebuilderx.bypass:
description: Create a statue, bypassing material requirements
default: op
playerstatuebuilderx.specialOrientation:
description: Allows creation of statues in the xz and yz plane. Orientation unpredictable so Admin only!
default: op
playerstatuebuilderx.override:
description: Player statue is created and overwrites blocks (usually just skips if not air)
default: op
playerstatuebuilderx.noWait:
description: The player does not need to wait out the cooldown to make the statue - 5 minutes is default
default: op
playerstatuebuilderx.undo:
description: The player is allowed to undo the last statue created by ANYONE on the server (no material refunds). You must have "override" permissions for this to work
default: op
playerstatuebuilderx.custom:
description: The player can put a '.' in front to create a custom statue from the plugin's data folder
default: true
playerstatuebuilderx.clearCache:
description: The player can run /clearskincache
default: op
Configuration File Explanation
# PlayerStatueBuilderX Configuration File
# For the number of blocks below inside the statue total, add one of the "charge" item to the total
# So if rate is 16 and the total blocks in the statue is 512, the player would need 512/16 = 32 of the "charge" item (in this case, Diamond)
rate: 16
# Cooldown time for using the command in MINUTES (No decimals, set to zero for no cooldown). So 1 means 1 minute between SUCCESSFUL statue CREATIONS (or statue parts).
cooldown: 1
# The "rate" determines how many extra of this "charge" item a player will need. Ex: EMERALD, REDSTONE, DIAMOND, etc.
charge: DIAMOND
# Whether the plugin requires exact materials (ex: 10 blue_concrete and 7 red_concrete INSTEAD of 17 white_concrete)
exact: false
# Cost (in $ - EssentialsX/Vault support) per block that will be placed (ex: 1000 block statue adds $2500 to the cost if priceRate is 2.5)
priceRate: 0.0
Gallery

1.7 Example:
<br>
1.10 Example:

1.17 Example
评论 0
登录后参与评分
还没有评论,来抢沙发吧