PluginLift电梯插件
插件简介
PluginLift 是一款适用于 Paper 1.21.11 的电梯插件。它提供 2×2 轿厢、双格电梯门、楼层显示器、呼梯面板和集选式调度,并使用自定义模型呈现完整的电梯外观。
主要功能
- 固定 2×2 内部空间的电梯轿厢。
- 每层配备两格宽、两格高的电梯门和门顶楼层显示器。
- 呼梯面板通过组件连接器与对应楼层站连接。
- 上行与下行呼梯请求分别排队,电梯优先处理当前运行方向上的请求。
- 轿厢内可打开楼层选择菜单。
- 电梯门检测门口玩家,在关闭过程中遇到阻挡时保持开启或重新打开。
- 使用实体承载层移动乘客,不修改玩家的速度、重力或飞行状态。
- 支持四个朝向的楼层站、呼梯面板和电梯布局。
- 自动保存楼层站、呼梯面板和已组装电梯。
插件物品
| 物品 |
用途 |
| 楼层站套件 |
在地面上放置楼层站、电梯门和楼层显示器。 |
| 呼梯面板 |
在地面上放置呼梯面板。 |
| 组件连接器 |
依次选择楼层站和呼梯面板并建立连接。 |
| 竖井同步器 |
将同一竖井内对齐的楼层站组装为一部电梯。 |
| 楼层设置器 |
设置楼层编号、楼层描述和到站提示音。 |
建造电梯
- 管理员执行
/pluginlift give all 获取全部插件物品。
- 使用楼层站套件在各楼层放置楼层站。所有楼层站必须位于相同的 X/Z 位置、保持相同朝向,并留出畅通的 2×2 竖井空间。
- 在每层放置呼梯面板。
- 手持组件连接器,依次右键楼层站和对应的呼梯面板。两者顺序可以互换,连接距离不得超过 16 格。
- 使用楼层设置器右键楼层站,并在聊天栏输入
楼层编号 | 楼层描述 | 提示音开/关。
- 每个楼层编号必须唯一。设置完成后,使用竖井同步器右键任意楼层站组装电梯。
- 点击呼梯面板上半部分登记上行呼梯,点击下半部分登记下行呼梯。
- 进入轿厢后右键内部区域,打开楼层选择菜单并选择目的楼层。
最高楼层不能登记上行呼梯,最低楼层不能登记下行呼梯。
命令
| 命令 |
说明 |
/pluginlift help |
显示插件命令帮助。 |
/pluginlift give <station|panel|connector|sync|config|all> [数量] |
获取指定插件物品。 |
/pluginlift list |
查看已组装的电梯。 |
/pluginlift resourcepack |
重新发送资源包。 |
/pluginlift delete <ID> |
删除指定电梯并保留楼层站。 |
/pluginlift respawn |
重新生成插件显示实体。 |
/pluginlift reload |
重新载入插件配置和数据。 |
Overview
PluginLift is an elevator plugin for Paper 1.21.11. It provides a 2×2 cabin, two-block-wide elevator doors, floor displays, hall-call panels, and collective call scheduling, presented with a complete set of custom models.
Main Features
- 内部空间固定为2×2的电梯轿厢。
- 每个楼层站均配备两格宽、两格高的电梯门以及顶部的楼层显示屏。
- 通过组件连接器将外呼面板与对应的楼层站相连。
- 上行和下行呼叫队列独立,优先响应当前运行方向的请求。
- 提供轿厢内楼层选择菜单。
- 门口玩家检测功能:当入口处有玩家时,保持门关闭或重新打开。
- 基于实体的载具楼层,可在不改变玩家速度、重力状态或飞行状态的情况下运送乘客。
- 支持四个水平方向(东南西北)的楼层站、外呼面板及电梯布局。
- 自动存储楼层站、外呼面板及已组装的电梯。
插件物品
| 物品 |
用途 |
| 楼层站套件 |
在地面放置楼层站、电梯门和楼层显示屏。 |
| 外呼面板 |
在地面放置外呼面板。 |
| 组件连接器 |
选择楼层站和外呼面板以建立连接。 |
| 井道同步器 |
将同一井道中对齐的多个楼层站组装为一部电梯。 |
| 楼层配置器 |
设置楼层编号、楼层描述及到达提示音。 |
建造电梯
- 以管理员身份运行
/pluginlift give all 获取所有插件物品。
- 使用楼层站套件在各楼层放置一个楼层站。所有楼层站必须共享相同的 X/Z 坐标和朝向,且门后需留出清晰的 2×2 井道空间。
- 在每个楼层放置一个外呼面板。
- 手持组件连接器,右键点击楼层站及其外呼面板。选择顺序不限,最大连接距离为 16 格。
- 使用楼层配置器右键点击每个楼层站,并在聊天栏输入
楼层编号 | 楼层描述 | 铃声开/关。接受的铃声值为 开/关 或 on/off。
- 每个楼层编号必须唯一。配置完成后,使用 shaft Synchronizer(轴同步器)右键点击任意楼层站以组装电梯。
- 点击外呼面板的上半部分可注册上行呼叫,点击下半部分可注册下行呼叫。
- 进入轿厢并右键点击其内部以打开楼层选择菜单,选择目的地。
顶层无法注册上行呼叫,底层无法注册下行呼叫。
命令
| 命令 |
描述 |
/pluginlift help |
显示命令帮助信息。 |
/pluginlift give <station|panel|connector|sync|config|all> [数量] |
给予所选的插件物品。 |
/pluginlift list |
列出已组装的电梯。 |
/pluginlift resourcepack |
重新发送资源包。 |
/pluginlift delete <ID> |
删除电梯但保留其楼层站。 |
/pluginlift respawn |
重生插件的显示实体。 |
/pluginlift reload |
重载插件配置及存储数据。 |
PluginLift电梯插件
插件简介
PluginLift 是一款适用于 Paper 1.21.11 的电梯插件。它提供 2×2 轿厢、双格电梯门、楼层显示器、呼梯面板和集选式调度,并使用自定义模型呈现完整的电梯外观。
主要功能
- 固定 2×2 内部空间的电梯轿厢。
- 每层配备两格宽、两格高的电梯门和门顶楼层显示器。
- 呼梯面板通过组件连接器与对应楼层站连接。
- 上行与下行呼梯请求分别排队,电梯优先处理当前运行方向上的请求。
- 轿厢内可打开楼层选择菜单。
- 电梯门检测门口玩家,在关闭过程中遇到阻挡时保持开启或重新打开。
- 使用实体承载层移动乘客,不修改玩家的速度、重力或飞行状态。
- 支持四个朝向的楼层站、呼梯面板和电梯布局。
- 自动保存楼层站、呼梯面板和已组装电梯。
插件物品
| 物品 |
用途 |
| 楼层站套件 |
在地面上放置楼层站、电梯门和楼层显示器。 |
| 呼梯面板 |
在地面上放置呼梯面板。 |
| 组件连接器 |
依次选择楼层站和呼梯面板并建立连接。 |
| 竖井同步器 |
将同一竖井内对齐的楼层站组装为一部电梯。 |
| 楼层设置器 |
设置楼层编号、楼层描述和到站提示音。 |
建造电梯
- 管理员执行
/pluginlift give all 获取全部插件物品。
- 使用楼层站套件在各楼层放置楼层站。所有楼层站必须位于相同的 X/Z 位置、保持相同朝向,并留出畅通的 2×2 竖井空间。
- 在每层放置呼梯面板。
- 手持组件连接器,依次右键楼层站和对应的呼梯面板。两者顺序可以互换,连接距离不得超过 16 格。
- 使用楼层设置器右键楼层站,并在聊天栏输入
楼层编号 | 楼层描述 | 提示音开/关。
- 每个楼层编号必须唯一。设置完成后,使用竖井同步器右键任意楼层站组装电梯。
- 点击呼梯面板上半部分登记上行呼梯,点击下半部分登记下行呼梯。
- 进入轿厢后右键内部区域,打开楼层选择菜单并选择目的楼层。
最高楼层不能登记上行呼梯,最低楼层不能登记下行呼梯。
命令
| 命令 |
说明 |
/pluginlift help |
显示插件命令帮助。 |
/pluginlift give <station|panel|connector|sync|config|all> [数量] |
获取指定插件物品。 |
/pluginlift list |
查看已组装的电梯。 |
/pluginlift resourcepack |
重新发送资源包。 |
/pluginlift delete <ID> |
删除指定电梯并保留楼层站。 |
/pluginlift respawn |
重新生成插件显示实体。 |
/pluginlift reload |
重新载入插件配置和数据。 |
Overview
PluginLift is an elevator plugin for Paper 1.21.11. It provides a 2×2 cabin, two-block-wide elevator doors, floor displays, hall-call panels, and collective call scheduling, presented with a complete set of custom models.
Main Features
- Elevator cabins with a fixed 2×2 interior.
- Two-block-wide, two-block-high elevator doors and an overhead floor display at every landing.
- Hall-call panels connected to their floor stations with the component connector.
- Separate up and down call queues, with requests in the current travel direction served first.
- An in-cabin floor selection menu.
- Doorway player detection that holds or reopens doors when the entrance is occupied.
- An entity-based carrier floor that moves passengers without changing player velocity, gravity, or flight state.
- Floor stations, hall-call panels, and elevator layouts that support all four horizontal directions.
- Automatic storage of floor stations, hall-call panels, and assembled elevators.
Plugin Items
| Item |
Purpose |
| Floor Station Kit |
Places a floor station, elevator doors, and floor display on the ground. |
| Hall-Call Panel |
Places a hall-call panel on the ground. |
| Component Connector |
Selects a floor station and hall-call panel to connect them. |
| Shaft Synchronizer |
Assembles aligned floor stations in the same shaft into one elevator. |
| Floor Configurator |
Sets the floor number, floor description, and arrival chime. |
Building an Elevator
- Run
/pluginlift give all as an administrator to obtain all plugin items.
- Use the Floor Station Kit to place a station at every floor. All stations must share the same X/Z position and facing, with a clear 2×2 shaft behind the doors.
- Place a Hall-Call Panel at every floor.
- Hold the Component Connector and right-click the floor station and its hall-call panel. Either selection order works, and the maximum connection distance is 16 blocks.
- Right-click each station with the Floor Configurator and enter
floor number | floor description | chime on/off in chat. The accepted chime values are 开/关 or on/off.
- Every floor number must be unique. After configuration, right-click any station with the Shaft Synchronizer to assemble the elevator.
- Click the upper half of a hall-call panel to register an up call, or the lower half to register a down call.
- Enter the cabin and right-click its interior to open the floor selection menu and choose a destination.
The top floor cannot register an up call, and the bottom floor cannot register a down call.
Commands
| Command |
Description |
/pluginlift help |
Displays command help. |
/pluginlift give <station|panel|connector|sync|config|all> [amount] |
Gives the selected plugin item. |
/pluginlift list |
Lists assembled elevators. |
/pluginlift resourcepack |
Sends the resource pack again. |
/pluginlift delete <ID> |
Deletes an elevator while keeping its floor stations. |
/pluginlift respawn |
Respawns the plugin's display entities. |
/pluginlift reload |
Reloads the plugin configuration and stored data. |
评论 0
登录后参与评分
还没有评论,来抢沙发吧