RealisticWorld
一个适用于 Minecraft 26.3 的 Paper 插件,使用更真实的、基于气候的地形生成器替换主世界生成器。
功能
- 使用带有域扭曲(domain warping)的大陆性噪声生成大陆、海岸线、大陆架和深海
- 使用带有狭窄过渡区域的脊状噪声生成高耸陡峭的山脉;雪线取决于温度
- 具有成形山谷以及砾石、沙子或粗化泥土河岸的河流
- 气候模型(温度、湿度和基于海拔的冷却)决定原版生物群系,保持与树木、矿石、洞穴和生物的兼容性
- 原版结构正常生成;插件通过
getBaseHeight提供自定义地形高度 - 每个生物群系拥有独立的地形形状、表面和特征(见下文)
- 使用 3D 噪声生成繁茂洞穴和滴水石洞穴,并包含自定义洞穴特征
- 可配置的世界高度(默认:Y -64 至 511)
- 通过更新
bukkit.yml,自动将自己注册为主世界、下界和末地默认世界的生成器 - 自定义洞穴(奶酪洞、意大利面隧道、天坑)替换原版洞穴挖掘器,因为原版的含水层与自定义地形不兼容,并在海洋中导致空气袋以及随机的水和岩浆
- 生物群系地形形状使用高斯核(约 60 格)进行混合,防止在生物群系边界处出现突兀的台阶
- 移除 Y -40 以上的原版岩浆湖(可配置);保留岩浆块下方的岩浆
- 岩浆块下方的岩浆(深度为 1–2 格,可配置):在下界,位于岩浆表面和岩浆海沿岸;在主世界深层洞穴中,作为岩浆喷口
下界
- 岩浆海、峡谷、钟乳石、连续柱体、浮空岛屿、锯齿状玄武岩三角洲、凹陷的灵魂沙山谷和菌毯森林
- 自定义特征:玄武岩石柱、黑石废墟和骨肋
末地
- 带有底部的中央圆形岛屿、带有小岛屿的间隙、带有梯田的大型外围岛屿、悬挂石柱和漂浮碎片
- 外围区域划分为多个区域,每个区域拥有独立的地形、表面和特征(见下文)
生物群系特定特征
海洋: 沙洲(海洋)、海沟(深海)、珊瑚礁(温暖海洋)、沙波纹(温和海洋)、沙梯田(深海温和海洋)、海底巨石(寒冷海洋)、海山(深海寒冷海洋)、冰山和浮冰(冰冻海洋和深海冰冻海洋)。
海岸: 沙波纹和漂流木(沙滩)、冰筏(积雪沙滩)、带有岩石尖峰的悬崖(多石海岸)。
沙漠和恶地: 沙丘、层状砂岩、砾石平原、孤峰和石林(沙漠);陶土梯田(恶地和林地恶地);尖塔(侵蚀恶地)。
热带草原: 科普杰(Kopjes)、带有陶土边缘的高原和风力塑造的梯田。
温带生物群系: 池塘和野花田(平原和向日葵平原);倒下的原木、蘑菇、长满地衣的地面和裸露的树根(森林、繁花森林、白桦森林、古老白桦森林和深色森林)。
寒冷生物群系: 灰化土、长满地衣的巨石和倒下的云杉树(针叶林变种);冰冻池塘和雪堆(积雪平原和积雪针叶林);冰高原(冰刺)。
热带和沼泽生物群系: 喀斯特塔(竹林);崎岖地形和长满地衣的巨石(丛林和稀疏丛林);带有潮汐通道的平坦沼泽(沼泽和红树林沼泽)。
高地: 花甸和池塘(草甸);花瓣和池塘(樱花树林);梯田和巨石(林地);冰川冰和冰斗(积雪斜坡和冰冻高峰);锯齿状山脊(锯齿山峰);方解石、安山岩和尖塔(多石山峰);碎石坡(被风吹拂的变种)。
洞穴: 粘土池(繁茂洞穴);带有方解石的滴水石丘陵(滴水石洞穴)。
末地生物群系
主岛(发生末影龙战斗的地方)以及中心周围 end.main-island.radius + 100 格范围内的区域保持不变。更远的外围会生成六个额外的区域。
Minecraft 仅支持五种原版末地生物群系;插件无法注册新的生物群系 ID。因此,每个自定义区域都会报告一个原版生物群系,该生物群系决定了生物、紫颂植物和末地城。按 F3 显示的是原版生物群系名称,而 /rw info 显示的是自定义区域。
| 区域 | 原版生物群系 | 地形和表面 | 特征 |
|---|---|---|---|
chorus_forest |
末地中部 | 平坦的末地石,带有紫珀斑块 | 密集的紫颂植物 |
crystal_fields |
末地中部 | 尖塔、紫水晶和方解石 | 带有簇群的紫水晶尖塔 |
obsidian_wastes |
末地荒地 | 由黑曜石和哭泣黑曜石组成的锯齿状山脊 | 黑曜石柱 |
ender_dunes |
末地荒地 | 由末地石和方解石组成的波纹沙丘 | 由骨块制成的死龙肋骨 |
purpur_ruins |
末地高地 | 末地石砖和紫珀的梯田 | 断裂的紫珀柱行和横梁 |
void_rifts |
小型末地岛屿 | 切割岛屿的狭窄裂隙,带有黑曜石边缘 | 无 |
地形高程在区域之间平滑混合,而表面材料在区域边界处过渡。四个经典区域(end_highlands、end_midlands、end_barrens、small_end_islands)保留其现有的平滑地形,并与新区域竞争空间。
末地城仅在原版末地高地或末地中部生物群系以及足够大的岛屿上生成。设置 end.custom-biomes: false 以恢复主岛之外的旧版末地生成方式。
配置
config.yml 按维度(overworld、nether、end)组织,并包括以下设置:
- 大陆大小、陆地比例、丘陵和山脉高度、山脉覆盖率和河流宽度
- 气候(生物群系大小、温度、湿度)
- 沙丘、洞穴密度、天坑、洞穴岩浆高度和岩浆喷口
- 各个特征组
- 下界岩浆高度、地板和天花板高度、峡谷、柱体、岛屿、岩浆与岩浆混合以及特征
- 末地主岛、外围岛屿、碎片和尖塔
每个选项都附有注释说明。旧版配置文件会在启动时自动备份(config-backup-v<N>.yml),迁移至新布局,并在可能的情况下保留现有值。
生物群系设置
end.biome-size: 使用相同的缩放等级控制末地区域的尺寸。overworld.climate.biome-size: 控制基于气候的生物群系区域大小(支持small、medium、large、extreme;也接受德语klein、mittel、gross、extrem)。nether.biome-size: 控制下界生物群系的尺寸。overworld.biomes.weights、nether.biomes.weights和end.biomes.weights: 每个生物群系都有一个生成权重(默认为 1.0,0.5 表示生成频率减半,2.0 表示生成频率翻倍,设为 0 则禁用该生物群系)。
权重仅影响与相同气候和海拔兼容的生物群系的分布。海岸线、河流和山脉不受生物群系尺寸的影响;请使用 continent-size、horizontal-scale 以及山脉相关设置来调整这些特征。
高度数据包
插件会在类加载器以及 cache/、versions/ 和服务端目录下的 JAR 包中搜索原版文件。如果未能找到,请将原版服务器 JAR 中的 data/minecraft/dimension_type/overworld.json 和 pack.mcmeta 复制到 plugins/RealisticWorld/vanilla/ 目录下,并保持其相对路径不变。
命令
/rw create <name> [normal|nether|end] [seed]/rw info— 显示你当前位置的生物群系和地形数值/rw tp <world>— 传送至指定世界
权限: realisticworld.admin
注意事项
- 已生成的世界中已有的区块不会被修改。新产生的区块会使用自定义生成器,这可能导致新旧地形之间出现可见的边界。
- 世界高度由一个覆盖主世界维度类型的数据包控制。现有的主世界不应更改其高度。
- 生成器会适应实际的世界高度。如果没有启用高度数据包(
world-height.enabled: false),山脉将被压缩在 Y -64 到 319 的高度范围内。 - 地牢、晶洞和熔岩湖属于原版装饰元素,无法通过 API 单独禁用。插件会在生成后移除熔岩湖;地牢和晶洞则会保留。
- 原版结构放置依赖于生成器提供的地形高度。部分结构可能仍会轻微悬浮或嵌入斜坡中。
许可证
许可证链接: 或
RealisticWorld
A Paper plugin for Minecraft 26.3 that replaces the Overworld generator with a more realistic, climate-based terrain generator.
Features
- Continents, coastlines, continental shelves, and deep oceans generated using continentalness noise with domain warping
- Tall, steep mountain ranges generated using ridged noise with narrow transition zones; snowlines depend on temperature
- Rivers with shaped valleys and gravel, sand, or coarse dirt riverbanks
- Climate model (temperature, humidity, and altitude-based cooling) determines vanilla biomes, preserving compatibility with trees, ores, caves, and mobs
- Vanilla structures generate normally; the plugin provides custom terrain heights through
getBaseHeight - Each biome has its own terrain shapes, surfaces, and features (see below)
- Lush Caves and Dripstone Caves generated using 3D noise, with custom cave features
- Configurable world height (default: Y -64 to 511)
- Automatically registers itself as the generator for the default world's Overworld, Nether, and End by updating
bukkit.yml - Custom caves (cheese caves, spaghetti tunnels, sinkholes) replace vanilla carvers, whose aquifers are incompatible with the custom terrain and caused air pockets in oceans and random water and lava
- Biome terrain shapes blend together using a Gaussian kernel (approximately 60 blocks), preventing abrupt steps at biome boundaries
- Vanilla lava lakes above Y -40 are removed (configurable); lava beneath magma blocks is preserved
- Lava beneath magma blocks (1–2 blocks deep, configurable): in the Nether, on magma surfaces and along lava seas; in deep Overworld caves, as magma vents
Nether
- Lava seas, canyons, stalactites, continuous pillars, floating islands, jagged basalt deltas, depressed Soul Sand Valleys, and Nylium forests
- Custom features: basalt spires, blackstone ruins, and bone ribs
End
- Rounded central island with an underside, a gap with small islands, large outer islands with terraces, hanging spires, and floating fragments
- Outer regions divided into zones, each with its own terrain, surface, and features (see below)
Biome-Specific Features
Oceans: Sandbanks (Ocean), trenches (Deep Ocean), coral reefs (Warm Ocean), sand ripples (Lukewarm Ocean), sand terraces (Deep Lukewarm Ocean), boulders on the seafloor (Cold Ocean), seamounts (Deep Cold Ocean), icebergs and pack ice (Frozen and Deep Frozen Ocean).
Coasts: Dune ripples and driftwood (Beach), ice floes (Snowy Beach), cliffs with rock spires (Stony Shore).
Deserts and badlands: Dunes, layered sandstone, gravel flats, buttes, and hoodoos (Desert); terracotta terraces (Badlands and Wooded Badlands); spires (Eroded Badlands).
Savannas: Kopjes, plateaus with terracotta edges, and wind-shaped terraces.
Temperate biomes: Ponds and wildflower fields (Plains and Sunflower Plains); fallen logs, mushrooms, mossy ground, and exposed roots (Forest, Flower Forest, Birch Forest, Old Growth Birch Forest, and Dark Forest).
Cold biomes: Podzol, mossy boulders, and fallen spruce trees (Taiga variants); frozen ponds and snowdrifts (Snowy Plains and Snowy Taiga); ice plateaus (Ice Spikes).
Tropical and swamp biomes: Karst towers (Bamboo Jungle); rugged terrain and mossy boulders (Jungle and Sparse Jungle); flat swamps with tidal channels (Swamp and Mangrove Swamp).
Highlands: Flower meadows and ponds (Meadow); petals and ponds (Cherry Grove); terraces and boulders (Grove); glacial ice and cirques (Snowy Slopes and Frozen Peaks); jagged ridges (Jagged Peaks); calcite, andesite, and spires (Stony Peaks); scree slopes (Windswept variants).
Caves: Clay pools (Lush Caves); dripstone hills with calcite (Dripstone Caves).
End Biomes
The main island (where the Ender Dragon fight takes place) and everything within end.main-island.radius + 100 blocks of the center remain unchanged. Farther out, six additional zones are generated.
Minecraft only supports the five vanilla End biomes; plugins cannot register new biome IDs. Each custom zone therefore reports a vanilla biome, which determines mobs, Chorus plants, and End Cities. F3 displays the vanilla biome name, while /rw info shows the custom zone.
| Zone | Vanilla Biome | Terrain and Surface | Features |
|---|---|---|---|
chorus_forest |
End Midlands | Flat End Stone with patches of Purpur | Dense Chorus plants |
crystal_fields |
End Midlands | Spires, Amethyst, and Calcite | Amethyst spires with clusters |
obsidian_wastes |
End Barrens | Jagged ridges of Obsidian and Crying Obsidian | Obsidian pillars |
ender_dunes |
End Barrens | Rippled dunes of End Stone and Calcite | Ribs of a dead dragon made of bone blocks |
purpur_ruins |
End Highlands | Terraces of End Stone Bricks and Purpur | Broken rows of Purpur pillars with beams |
void_rifts |
Small End Islands | Narrow rifts cutting through islands, with Obsidian edges | None |
Terrain elevations blend smoothly between zones, while surface materials transition at zone boundaries. The four classic zones (end_highlands, end_midlands, end_barrens, small_end_islands) retain their existing smooth terrain and compete with the new zones for space.
End Cities continue to generate only in vanilla End Highlands or End Midlands biomes and on sufficiently large islands. Set end.custom-biomes: false to restore the previous End generation outside the main island.
Configuration
config.yml is organized by dimension (overworld, nether, end) and includes settings for:
- Continent size, land ratio, hill and mountain height, mountain coverage, and river width
- Climate (biome size, temperature, humidity)
- Dunes, cave density, sinkholes, cave lava height, and magma vents
- Individual feature groups
- Nether lava height, floor and ceiling height, canyons, pillars, islands, magma with lava, and features
- End main island, outer islands, fragments, and spires
Every option is documented with comments. Older configs are backed up on startup (config-backup-v<N>.yml), migrated to the new layout, and existing values are preserved where possible.
Biome Settings
end.biome-size: Controls the size of End zones using the same scale levels.overworld.climate.biome-size: Controls the size of climate-based biome regions (small,medium,large,extreme; also acceptsklein,mittel,gross,extrem).nether.biome-size: Controls Nether biome size.overworld.biomes.weights,nether.biomes.weights, andend.biomes.weights: Each biome has a spawn weight (1.0 by default, 0.5 for half as frequent, 2.0 for twice as frequent, and 0 to disable).
Weights only affect the distribution of biomes compatible with the same climate and altitude. Coastlines, rivers, and mountains are unaffected by biome size; use continent-size, horizontal-scale, and mountain settings for those.
Height Datapack
The plugin searches for vanilla files in the classloader and in JARs under cache/, versions/, and the server directory. If this fails, copy data/minecraft/dimension_type/overworld.json and pack.mcmeta from a vanilla server JAR into plugins/RealisticWorld/vanilla/, preserving their relative paths.
Commands
/rw create <name> [normal|nether|end] [seed]/rw info— Displays the biome and terrain values at your current location/rw tp <world>— Teleports you to a world
Permission: realisticworld.admin
Notes
- Existing chunks in an already-generated world are not modified. New chunks use the custom generator, which can create visible borders between old and new terrain.
- World height is controlled by a datapack that overrides the Overworld dimension type. Existing Overworlds must not have their height changed.
- The generator adapts to the actual world height. Without the height pack (
world-height.enabled: false), mountains are compressed into the range Y -64 to 319. - Dungeons, geodes, and lava lakes are vanilla decoration and cannot be individually disabled through the API. The plugin removes lava lakes after generation; dungeons and geodes remain.
- Vanilla structure placement uses terrain heights provided by the generator. Some structures may still float slightly or become embedded in slopes.
LICENSE
LICENSE Link: or
下载 RealisticWorld
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 RealisticWorld
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 RealisticWorld
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 RealisticWorld
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 RealisticWorld
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 RealisticWorld
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 RealisticWorld
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 RealisticWorld
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 RealisticWorld
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 RealisticWorld
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
更新类
关于这个资源的讨论、问题反馈与使用心得
还没有讨论,来发第一帖吧
你是这个资源的作者?登录后可认领此资源。
相似资源
插件
重新定义服务器上的生物运输方式。使用高度可定制的口袋道具,安全地捕获、存储和释放任何实体。
插件
用于绘制游戏内地图或在浏览器中随探索实时进行地图绘制的实时地图。
插件
使床在所有维度中爆炸的模组
插件
为 Armor Poser 模组添加兼容性
插件
SkyBlock、OneBlock、Boxed、SkyGrid、AcidIsland、CaveBlock、Poseidon、StrangerRealms——以及更多!这些只是由 BentoBox 支持的基于岛屿的游戏模式之一。来自原版 ASkyBlock 的作者。
插件
一个高度兼容、功能完善且稳定的 TPA 模组
评论 0
登录后参与评分
还没有评论,来抢沙发吧