
ScubaKit 3.1.0 [2032][1.2.3-R0.1]
你戴上头盔,然后跳入水中。你将能够在水中停留更长的时间。你可以在水下停留的时间是可配置的,针对每个头盔。
功能:
- 不同的头盔可以将你的最大空气量更改为不同的数值。
- 玩家默认的初始空气量(无头盔状态)也可以进行配置
常见问题解答:
- 问:代表我角色生命值的泡泡似乎与我剩余的空气量不对应
- A: 在标准的 Bukkit 服务器上,目前无法修复这些气泡问题。不过我听说安装 Spout(客户端版本)可以解决此问题。
- 问:我装了(这里插入任意头上带方块模组),但看起来你只支持 BlockHat,这是为什么?
- 答:这并不准确。任何“头上带方块”的模组都应该能正常工作,只需在配置文件中将 `BlockHatInstalled` 设置为 `true` 即可!
- 问:为什么是南瓜?为什么不使用钻石头盔或没有头盔?
- 答:这完全可配置,由你决定!南瓜曾是默认行为,因为我在自己的服务器上就是这么做的。
配置说明:
-
将 ScubaKit.jar 放入你的 Plugins 文件夹中。
-
打开 Plugins/ScubaKit/config.yml。如果该文件不存在,你可以从完整压缩包中获取它,或者在安装好 ScubaKit 的情况下启动一次服务器。ScubaKit 会自动生成该文件。 其内容大致如下:
scubaValues: leatherAir: 320 diamondAir: 320 ironAir: 320 pumpkinAir: 2025 chainAir: 320 defaultAir: 320 goldAir: 320 system:
ignorePermissions: true SuperPerms: true blockHatInstalled: false debugLogs: false
如果缺少任何设置,请运行一次服务器,它们将被自动添加。
此处显示的值是假设值缺失时采用的默认值。
列出的数字表示佩戴对应头盔时,你可以在水下停留的刻数(tics)。我认为原版 Minecraft 的默认值是 300,但为了给予玩家更多的呼吸空间,我们默认提供了稍长的时间。
权限: 首先,可以通过设置以下选项来禁用权限支持: ignorePermissions: true 当 ignorePermissions 为 true 时,模组将跳过权限检查,并假定所有人都可以使用潜水装备。
如果 ignorePermissions 为 false,则会检查 SuperPerms。如果 SuperPerms 为 true,则从 Bukkit API 获取权限;如果为 false,则会尝试使用传统的 Permissions 插件(2.x 和 3.x 版本均适用)。
权限节点:
- ScubaKit.ScubaGear.* - 允许模组修改玩家的肺部容量
- ScubaKit.ScubaGear.Pumpkin - 允许通过佩戴南瓜头盔来改变玩家肺部容量
- ScubaKit.ScubaGear.Chain - 允许通过佩戴锁链头盔来改变玩家肺部容量
- ScubaKit.ScubaGear.Leather - 允许通过佩戴皮革头盔来改变玩家肺部容量
- ScubaKit.ScubaGear.Iron - 允许通过佩戴铁制头盔来改变玩家肺部容量
- ScubaKit.ScubaGear.Gold - 允许通过佩戴金制头盔来改变玩家肺部容量
- ScubaKit.ScubaGear.Diamond - 允许通过佩戴钻石头盔来改变玩家肺部容量
Bukkit.org 讨论帖:
旧版本:
<center>
ScubaKit 3.1.0 [2032][1.2.3-R0.1]
</center>
You put a helmet on your head, then jump in the water. You'll be able to stay in the water a great deal longer. The length of time you can stay under is configurable, per helmet.
Features:
- Different helmets can change your maximum air to different amounts.
- The default amount of air a player has (no helm) can be configured as well
F.A.Q:
- Q: The little bubbles that represent my characters health bar don't seem to line up with how much air I have left
- A: Fixing those bubbles is not currently possible on a standard Bukkit server. I have heard though that installing Spout (the client side one) fixes this issue.
- Q: I have (insert any block on head mod here), but you only seem to support BlockHat, why is that?
- A: Well that's just not true, Any block-on-your-head mod should work, just set BlockHatInstalled to true in the config file!
- Q: Why pumpkins? Why not diamond helms or no helm?
- A: That is totally configurable, and up to you! Pumpkins used to be the default behavior because that's how I do it on my server.
Configuration:
-
Place ScubaKit.jar in your Plugins folder.
-
open config.yml in Plugins/ScubaKit/ . If it does not exist, you can either get it from the Full Zip, or just run your server once with the ScubaKit installed. ScubaKit will automatically generate the file. It should look something like this;
scubaValues: leatherAir: 320 diamondAir: 320 ironAir: 320 pumpkinAir: 2025 chainAir: 320 defaultAir: 320 goldAir: 320 system: ignorePermissions: true SuperPerms: true blockHatInstalled: false debugLogs: false
If any settings are missing, run the server once and they will be added
Values shown here are default values assumed if a value is missing.
The number listed is the number of tics you can stay underwater with the helm indicated in the words next to said number. I believe vanilla Minecraft's default value is 300, but by default we give our players a little extra breathing room.
Permissions: first off, permission support can be disabled by setting ignorePermissions: true ignorePermissions tells the mod to not bother doing permission checks, instead we assume everyone is allowed to use scubagear.
If ignorePermissions is false, then we look at SuperPerms. If SuperPerms is true, we get our permissions from the bukkit API, if it is false however, we will attempt to lock onto the legacy Permissions mod (2/3 both work) Permissions Nodes:
- ScubaKit.ScubaGear.* - allows players lungs to be altered by the mod
- ScubaKit.ScubaGear.Pumpkin - allows players lungs to be altered by wearing a pumpkin helm
- ScubaKit.ScubaGear.Chain - allows players lungs to be altered by wearing a chain helm
- ScubaKit.ScubaGear.Leather - allows players lungs to be altered by wearing a leather helm
- ScubaKit.ScubaGear.Iron - allows players lungs to be altered by wearing an iron helm
- ScubaKit.ScubaGear.Gold - allows players lungs to be altered by wearing a gold helm
- ScubaKit.ScubaGear.Diamond - allows players lungs to be altered by wearing a diamond helm
Bukkit.org thread:
Old versions:
下载 ScubaKit
下载 ScubaKit
下载 ScubaKit
下载 ScubaKit
下载 ScubaKit
下载 ScubaKit
下载 ScubaKit
下载 ScubaKit
下载 ScubaKit
下载 ScubaKit
3.1.1 更新内容
- 现已兼容 1.3-R1 及更高版本
- 扩展了新方块对 blockhat 的支持
- 修复了部分缺失的权限。
无!
关于这个资源的讨论、问题反馈与使用心得
还没有讨论,来发第一帖吧
你是这个资源的作者?登录后可认领此资源。
相似资源
插件
重新定义服务器上的生物运输方式。使用高度可定制的口袋道具,安全地捕获、存储和释放任何实体。
插件
用于绘制游戏内地图或在浏览器中随探索实时进行地图绘制的实时地图。
插件
使床在所有维度中爆炸的模组
插件
为 Armor Poser 模组添加兼容性
插件
SkyBlock、OneBlock、Boxed、SkyGrid、AcidIsland、CaveBlock、Poseidon、StrangerRealms——以及更多!这些只是由 BentoBox 支持的基于岛屿的游戏模式之一。来自原版 ASkyBlock 的作者。
插件
一个高度兼容、功能完善且稳定的 TPA 模组
评论 0
登录后参与评分
还没有评论,来抢沙发吧