SimpleLift by PLAYCITY BLOCK
使用方块、按钮和告示牌建造电梯。滚动选择楼层,按下按钮,一同出行。无需注册命令、数据库、客户端模组或资源包。
复用兼容的 Lift/LiftReloaded 结构,并在首次启动时导入其配置。在切换前,先在服务器副本上测试现有电梯。

使用自定义资源包和光影的游戏内控制界面。SimpleLift 并不强制要求使用它们。
建造、选择、乘坐
底部使用 铁块,上层停靠点使用 玻璃,垂直对齐。在每个停靠点的相邻墙壁上安装控制面板:
Floor + 3 Wall sign
Floor + 2 Button
Floor + 1 Clear space
Floor Iron base / glass upper floor
至少建造两个停靠点,保持井道畅通,然后右键点击一个空白的控制告示牌进行初始化。
- 手持空手右键点击告示牌并滚动。潜行滚动可跳过多个楼层;操作栏会显示你的选择。
- 通过再次点击告示牌或交换手物品键(默认为 F)来确认。
- 站在地板上并 按下按钮。所有位于出发区域范围内的玩家将一同乘坐。
手持物品时,你可以通过点击告示牌来循环切换目的地。繁忙的井道会拒绝额外的呼叫;呼叫不会被排队。等待在中间楼层的玩家将停留在原地。
自定义
在 plugins/SimpleLift/config.yml 中更改材料、速度、高度和占地面积限制,或启用红石呼叫。
在 0.3.3-SNAPSHOT 中:
- 按钮铃声: 木按钮使用两音符的
warm 钟声,石按钮使用三音符的 crystal 铃声。通过原版按钮标签或精确材质分配配置文件;未匹配的按钮使用默认设置。音效使用内置的 Minecraft 乐器。soundVolume 控制整体音量级别;显式的现有配置文件分配将被保留。
- 酒店铃声: 通过材质、标签或默认分配选项加入低缓下降的三音符
hotel 铃声。例如,设置 arrivalChimes.materials.OAK_BUTTON: hotel 以将其应用于橡树按钮。现有的默认设置将被保留。
- 语言: 从 30 种内置本地化中选择一种,包括
en、ko、de、ja、pt_BR、zh、zh_HK 和 zh_TW,或使用 custom。预设应用范围覆盖整个服务器;自定义模式保留你的消息翻译。楼层名称不会被翻译。
使用 /lift reload 应用编辑。无效的设置将使之前的配置保持活跃。
安装
停止服务器并备份世界和插件文件夹。移除任何 Lift/LiftReloaded JAR 文件,将 SimpleLift 放入 plugins 文件夹,然后正常重启服务器。检查 /lift info。请勿使用插件热重载工具。
目标平台为 Bukkit、Spigot、Paper 和 Purpur 上的 Minecraft 1.13–26.3。请使用你的服务器所需的 Java 版本。不支持 Folia。
运行时检查覆盖了 0.3.0-SNAPSHOT 中的 Paper 1.13.2、1.16.5、1.20.6、1.21.8 和 26.2。其他版本/服务器家族未经单独验证。0.3.3-SNAPSHOT 源代码通过了针对 Spigot 1.13.2 和 Paper 26.3 build 218 的干净构建及全部 47 项测试。现有的 0.3.3-26.3-beta.2 JAR 在 Paper 26.3 build 157 上正常运行;其可执行类和资源与此发布版匹配,差异仅限于版本元数据。这仅确认了启动情况;完整的乘坐场景和游戏内监听检查在 26.3 上仍处于待定状态。
须知
- 权限:
lift 和 lift.change 默认对所有用户开放;lift.reload 仅限操作员。
- 无遥测、外部连接或运行时下载。配置保留在插件文件夹中;电梯方块和告示牌保留在世界存档中。
- NoteBlockAPI
.nbs 音乐尚未实现。旅行过程中的崩溃可能导致临时移除的楼层方块无法恢复;请保持备份。
指南 · 한국어 · 问题反馈
包含改编自 kikelkik 的 LiftReloaded 的代码,后者是 croxis 的 Lift 的继任者。经过重新设计和扩展以适应 SimpleLift。采用 GPL-3.0-only 许可证授权。
0.3.3-SNAPSHOT 源代码及构建说明 (ZIP)
SimpleLift by PLAYCITY BLOCK
Build elevators with blocks, buttons, and signs. Scroll to choose a floor, press the button, and travel together. No registration commands, database, client mod, or resource pack.
Reuse compatible Lift/LiftReloaded structures and import their configuration on first start. Test existing lifts on a server copy before switching.

In-game controls with a custom resource pack and shaders. Neither is required by SimpleLift.
Build, select, ride
Use iron blocks at the bottom and glass at upper stops, aligned vertically. Attach controls to an adjacent wall at each stop:
Floor + 3 Wall sign
Floor + 2 Button
Floor + 1 Clear space
Floor Iron base / glass upper floor
Build at least two stops, keep the shaft clear, then right-click a blank control sign to initialize.
- Right-click the sign with an empty hand and scroll. Sneak-scroll skips several floors; the action bar shows your choice.
- Confirm with another sign click or the swap-hand key (F by default).
- Stand on the floor and press the button. Everyone inside the departure footprint rides together.
Holding an item lets you cycle destinations by clicking the sign instead. Busy shafts refuse additional calls; calls are not queued. Players waiting on intermediate floors stay in place.
Customize
Change materials, speed, height and footprint limits, or enable redstone calls in plugins/SimpleLift/config.yml.
In 0.3.3-SNAPSHOT:
- Button chimes: a two-note
warm bell for wooden buttons and a three-note crystal chime for stone buttons. Assign profiles by vanilla button tag or exact material; unmatched buttons use the default. Sounds use built-in Minecraft instruments. soundVolume controls the overall level; explicit existing profile assignments are preserved.
- Hotel chime: opt into a low, descending three-note
hotel chime through a material, tag, or default assignment. For example, set arrivalChimes.materials.OAK_BUTTON: hotel to apply it to oak buttons. Existing defaults are preserved.
- Language: choose one of 30 bundled locales, including
en, ko, de, ja, pt_BR, zh, zh_HK, and zh_TW, or use custom. Presets apply server-wide; custom mode keeps your message translations. Floor names are not translated.
Apply edits with /lift reload. Invalid settings keep the previous configuration active.
Install
Stop the server and back up the world and plugins. Remove any Lift/LiftReloaded JAR, put SimpleLift in plugins, and restart normally. Check /lift info. Do not use plugin hot-reload tools.
Targets Minecraft 1.13–26.3 on Bukkit, Spigot, Paper, and Purpur. Use the Java version required by your server. Folia is unsupported.
Runtime checks covered Paper 1.13.2, 1.16.5, 1.20.6, 1.21.8, and 26.2 on 0.3.0-SNAPSHOT. Other versions/server families are not individually verified. The 0.3.3-SNAPSHOT source passed clean builds and all 47 tests against both Spigot 1.13.2 and Paper 26.3 build 218. The existing 0.3.3-26.3-beta.2 JAR enabled normally on Paper 26.3 build 157; its executable classes and resources match this release, with differences limited to version metadata. This confirms startup only; full ride scenarios and in-game listening checks remain pending on 26.3.
Good to know
- Permissions:
lift and lift.change default to everyone; lift.reload to operators.
- No telemetry, external connections, or runtime downloads. Configuration stays in the plugin folder; lift blocks and signs stay in the world save.
- NoteBlockAPI
.nbs music is not implemented. A crash during travel can leave temporarily removed floor blocks unrestored; keep backups.
Guide · 한국어 · Issues
Includes code adapted from LiftReloaded by kikelkik, the successor to Lift by croxis. Reworked and extended for SimpleLift. Licensed under GPL-3.0-only.
0.3.3-SNAPSHOT source and build instructions (ZIP)
评论 0
登录后参与评分
还没有评论,来抢沙发吧