此插件仅适用于 Minecraft 1.17.0 - 1.21.10 版本
如需支持基岩版,您需要安装 Floodgate 的 Bukkit/Spigot 版本(同时支持 1.0 和 2.0)!
如果遇到任何问题,请不要留下差评,而是加入 Discord,以便我们为您提供帮助!

Themis 是一款注重准确性、效率和简洁性的反作弊插件。
我强烈建议您加入 Discord 服务器 以获取最新动态和支持。
Themis 支持 Spigot 和 Paper。其他分支可能也能正常工作,但我无法保证。
此外,Themis 具备真正的基岩版/Geyser 支持!所谓的“真正”是指它会对基岩版玩家执行正确的检查。其他一些反作弊插件通常会排除对基岩版玩家的检查,这意味着他们可以完全绕过反作弊系统。使用 Themis 则不存在这种情况!
请注意,由于代码库完全不同且 Geyser 存在导致随机异常行为的 bug(Geyser 绝对是一款了不起的软件),因此支持基岩版比 Java 版更具挑战性,可能会出现误报。请在 Discord 上报告这些问题,以帮助我修复它们!
Themis 拥有灵活的配置,允许您配置任意数量的操作,每个操作可包含任意数量的命令。对于每个操作,您可以定义触发所需的最小分数,以及再次触发所需的分数和时间延迟。所有这些都可以针对每个检查单独配置。您可以在下方的配置部分找到相关设置。
目前,Themis 主要专注于移动类作弊检测,但未来将扩展并检测更多类型的作弊行为。
插件 Anti Cheat Replay 支持 Themis,可用于在玩家被 Themis 惩罚时录制他们的画面,以便后续审查并作为证据使用。

- BHop Speed
- Blink
- Boat Fly
- Boat Speed
- Climb / Spider
- Elytra Fly
- Fly
- Jetpack
- KillAura(如果使用了增加的距离)
- NoFall
- OnGround Speed
- Reach
- Step
- Timer
- Vanilla Speed
- WaterWalk / Jesus
请注意,此列表并不完整。某些检查可能会捕获其原本未设计用于检测的作弊行为,而且不同作弊客户端中同一作弊行为可能有多种名称。因此,即使某项作弊不在列表中,也有可能被拦截,尤其是与已列出的作弊行为相似的情况。

Themis 不仅承诺高效,而且确实做到了这一点。以下是在运行 Themis 0.8.1 版本(启用所有检查)且在线玩家约 15 人的服务器上持续一小时的性能计时报告:
数据显示,平均而言,Themis 占用了 0.23% 的刻时间,即每位玩家约占用 0.015%。当然,这个数字会根据您的服务器硬件和设置(插件、游戏模式等)而有所不同。
作为对比,截至撰写本文时(2021 年 4 月 13 日),AAC 在其插件页面上提供了类似的统计数据:在 140-150 名玩家的情况下,AAC 占用了 3.92% 的刻时间,即每位玩家约占用 0.026% 到 0.028%。因此,Themis 的速度几乎是 AAC 的两倍。
(请注意,这并不是一个公平的比较,因为 AAC 的功能远比 Themis 丰富!我列出这些数据并非为了说明 Themis 更好,我只是认为单纯的数据统计对大多数人来说毫无意义,所以我希望提供一个参考基准,并选择了 AAC,因为它是一款优化良好的反作弊插件,广为人知,且在插件页面上有类似的统计数据。)
如果您发现这些计算有任何错误,请告诉我!

要安装 Themis,请仔细按照以下步骤操作:
- 确保您正在运行 Spigot 或 Paper 的 1.17.X、1.18.X、1.19.X、1.20.X 或 1.21.X 版本。其他分支可能也能正常工作,但我无法保证。
- 从此页面下载 Themis .jar 文件并将其放入您的 plugins 目录。(从 0.17.0 版本开始,不再需要 ProtocolLib)
- 仅在您的服务器允许基岩版玩家加入时: 安装 Floodgate 以允许 Themis 检查玩家是否使用基岩版,并相应地调整检查策略(同时支持 1.0 和 2.0)。请注意,您需要在运行 Themis 的每台服务器上安装 Bukkit 版本,仅安装 Bungee 版本是不够的!如果您使用 Bungee,需要在 Bungee Floodgate 选项中设置
send-floodgate-data,否则 Floodgate API 将无法工作。还强烈建议在 Geyser 配置中启用 forward-player-ping,否则 Themis 将无法测量基岩版玩家的延迟。
- 现在重启服务器以加载所有更改。运行
/themis 命令以检查安装是否成功。如果失败,请参阅下方的故障排除部分。
- 仅在您的服务器允许基岩版玩家加入时: 对一名基岩版玩家运行
/themis info [PlayerName],并确保 Themis 正确将其报告为基岩版玩家,否则您的 Floodgate 设置可能存在错误。如果没有正确报告,请确保如上所述启用了 send-floodgate-data,并加入 Discord 服务器寻求帮助。

问题:Themis 未生效
如果您安装了 Themis 但它没有正常工作,请尝试运行 /themis 命令以查看 Themis 是否在运行。请注意,您需要 themis.command.info 权限,默认情况下所有人都有此权限,但您的权限插件可能会禁用它。
如果生效了:
这意味着 Themis 已成功加载并正在正常运行。如果您没有收到任何检测通知,请先查看下方的“被拦截的黑客行为”部分,确保您正在测试的黑客行为受到 Themis 的支持。如果受支持但未显示,可能是因为您拥有绕过权限(bypass permission)。该权限默认是禁用的(即使对 OP 也是如此),但您可能通过权限插件获得了它,例如如果您拥有 * 权限。如果您使用 LuckPerms,可以使用 /lp user [用户名] permission check themis.bypass 来检查是否拥有该权限,其他权限插件可能也提供类似的命令。如果您确定 Themis 正在运行且您没有绕过权限,但仍然没有收到任何检测通知,请加入 Discord 以获取帮助。
如果没有生效:
这意味着在加载 Themis 时出现了问题。尝试运行 /pl 命令,看看 Themis 是否出现在列表中。
- 如果它没有出现,这很可能意味着您没有将
.jar 文件放在正确的目录中,或者放置后没有重启服务器。请确保 .jar 文件位于 plugins 目录中,然后重启服务器。如果这没有帮助,请加入 Discord 以获取更多信息。
- 如果它以红色显示,这最有可能意味着您当前运行的 Minecraft 版本不受支持。如果不是这个问题,请检查日志以获取更多信息,并加入 Discord 以获取帮助。
在 Discord 上寻求支持时,请直接附上日志文件。其中包含大量有用的信息,这将使帮助您变得更轻松、更快速!
问题:基岩版玩家被标记
对一名基岩版玩家运行 /themis info [玩家名称],并检查 Themis 是否正确将其识别为基岩版玩家。如果不是,则说明您的 Floodgate 配置不正确。这不是 Themis 的问题!通常可以通过将 Bungee/Velocity Floodgate 配置中的 send-floodgate-data 设置为 true 来解决此问题。
问题:基岩版玩家的延迟始终为 0
您需要在 Geyser 配置中启用 forward-player-ping 选项。

从版本 0.14.0 开始,这是默认配置:
默认配置
----------------------------------------------------------------------------------------------------
# 欢迎使用 Themis 配置文件!
#
# 此配置文件由 Themis 版本 0.14.0 生成
# --> 如果您使用的是更新版本的 Themis,请查看更改日志以确认您的配置是否需要更新。
# 如果您想更新配置文件,您可以手动更改它,或者重命名此文件,这将导致在下一次服务器重启时生成一个新的
# 最新的配置文件。
#
# 重要提示:此配置文件允许您为每个检查单独更改每一项设置,以实现最大程度的灵活性。
# 然而,通常情况下,您希望大多数检查使用相同的值。因此,这里有一个
# “default”(默认)部分,它定义了所有检查的默认值,然后在下面的特定检查部分中可以覆盖这些值。
# 例如,如果您想禁用速率检查(tickrate check),您可以通过以下方式添加并覆盖“enable”设置:
# ----------
# tickrate: <-- 这应该已经在配置文件中,如果末尾仍有 {} 请删除
# enable: false <-- 这是您要添加的内容
# ----------
#
# 所有值要么是布尔值(true / false),要么是双精度浮点数(1.0, 2.5, -123.456, ...)。
# 所有时间值的单位均为秒。
#
# 如果您有任何问题、困难,或者只是希望保持最新,您可以加入 Themis Discord:
# https://discord.gg/jjkR2EU
# 但在提问之前,请先仔细阅读此处的一切内容,这只需要几分钟,并且可以解答许多问题。
# 我们很乐意在 Discord 上为您提供帮助,但我们经常反复收到相同的问题,尽管它们已经在这里回答过了。
# ----------------------------------------------------------------------------------------------------
# 以下是用于所有未在下方明确覆盖其设置的检查的默认值
default:
# 是否应启用此检查?
enable: true
# Themis 是否应拦截黑客行为(例如通过将玩家拖回)?
block: true
# 分数达到多少时,Themis 应开始拦截黑客行为?
block-threshold: 10.0
# Themis 允许您配置操作,每个操作都可以运行任意命令列表。您可以指定确切何时
# 运行操作。请参阅下面的 notify 操作以获取详细示例:
actions:
# 操作的名称是什么?此名称必须是唯一的。
notify:
# Themis 运行此操作的最低分数是多少?
execution-threshold: 10.0
# 需要发生多少次新的违规行为才会重复执行此操作?
repetition-threshold: 5.0
# 需要过去多长时间才会重复执行此操作?
repetition-delay: 10.0
# 应运行哪些命令?您可以指定任意数量的命令,它们将按照列出的顺序依次运行。
# 目前,您可以使用以下占位符:%player_name%, %detection_type%, %score%, %ping%, %tps%
commands:
- "themis notify §5[Themis] §4%player_name% §cwas flagged for §4%detection_type% §chacks!\n§c[Score: §4%score% §c| Ping: §4%ping% §c| TPS: §4%tps%§c]"
# 是否仅检查基岩版玩家而忽略 Java 版玩家?
bedrock-only: false
# Themis 检查玩家的最大延迟阈值是多少?超过此延迟的玩家将不会被检查。
# 警告:黑客客户端可以伪造高延迟,请谨慎使用此设置!
# 设置为 -1.0 表示始终检查
max-ping: -1.0
# Themis 应在最低 TPS 低于多少时停止执行检测?当服务器 TPS 低于此值时,Themis 将不会检查任何玩家
# 设置为 -1.0 表示始终执行检查
min-tps: -1.0
# 违规行为应在多久后过期?
# 将其设置为 -1.0 以禁用此功能,并将违规行为存储直到服务器重启
violation-expiration: 900.0
# 注意:下面的部分为空是完全正常的。请参阅配置文件顶部的第三段以获取解释。{} 标记表示这是一个空的部分,你在添加设置时需要移除它。
# 这用于检测在船中移动时的行为
# 游戏内名称:Boat Movement(船只移动)
# 可能触发此检测的作弊:BoatFly, BoatSpeed, ...
boat_movement: {}
# 这用于检测使用鞘翅飞行时的行为
# 游戏内名称:Elytra Flight(鞘翅飞行)
# 可能触发此检测的作弊:Elytra+, Extra Elytra, ...
elytra_flight: {}
# 这用于检测水平移动(沿 x 轴和 z 轴)。
# 游戏内名称:Speed(速度)
# 可能触发此检测的作弊:所有类型的 Speed, Fly, ...
horizontal_movement: {}
# 这用于检测某些非法数据包
# 游戏内名称:Illegal Packets(非法数据包)
# 可能触发此检测的作弊:Fly(例如在 Aristois 或 Inertia 中),...
illegal_packets: {}
# 这用于检测一种在许多移动类作弊中使用的非法数据包数据。
# 游戏内名称:Spoofed Packets(伪造数据包)
# 可能触发此检测的作弊:NoFall, WaterWalk/Jesus, 某些 Fly 和 Speed 作弊,...
packet_spoof: {}
# 这用于检测玩家是否击中了超出其正常攻击范围的实体。
# 游戏内名称:Read(距离/范围)
# 可能触发此检测的作弊:Reach, KillAura
reach: {}
# 此检测用于判断客户端是否在加速时间,这意味着它可以例如移动得更快。
# 游戏内名称:Timer / Blink(计时器/闪烁)
# 可能触发此检测的作弊:Timer, Blink, ...
tickrate: {}
# 这用于检测垂直移动(沿 y 轴)。
# 游戏内名称:Flight / Y-Movement(飞行/Y轴移动)
# 可能触发此检测的作弊:Fly, Glide, Jetpack, HighJump, Step, 某些 Speed 模式,...
vertical_movement: {}

/themis
显示 Themis 是否正在运行以及安装的版本
/themis help
列出 Themis 的命令及其描述
/themis info <player name>
显示玩家的违规分数和其他信息
/themis notifications [on|off]
切换或显示通知设置
/themis notify <message>
向拥有 themis.notify 权限的所有人发送反作弊通知,这旨在在配置文件中配置使用,而不是直接在游戏内使用
/themis reload
重新加载配置文件以使更改生效

themis.bypass
绕过所有 Themis 的检测
默认值:false
themis.bypass.[checkName]
绕过特定的 Themis 检测,将 [checkName] 替换为检测的名称(使用与配置文件中相同的名称,例如针对飞行检测使用 themis.bypass.vertical_movement)
默认值:false
themis.silent
使 Themis 的检测保持静默,即它们不会阻止作弊行为
默认值:false
themis.silent.[checkName]
使特定的 Themis 检测保持静默,即它们不会阻止作弊行为,将 [checkName] 替换为检测的名称(使用与配置文件中相同的名称,例如针对飞行检测使用 themis.bypass.vertical_movement)
默认值:false
themis.notifications
描述:接收检测通知
默认值:op
themis.technical
描述:接收技术通知,例如关于更新或检测到问题的通知
默认值:op
themis.command.base
描述:使用 /themis 查看 Themis 是否正在运行以及安装的版本
默认值:true
themis.command.help
使用 /themis help
默认值:true
themis.command.info
使用 /themis info
默认值:op
themis.command.notify
描述:使用 /themis notify
默认值:false
themis.command.reload
描述:使用 /themis reload 重新加载配置文件
默认值:op
This plugin only works on Minecraft versions 1.17.0 - 1.21.10
For Bedrock support you need to install the Bukkit/Spigot version of Floodgate (both 1.0 and 2.0 are supported)!
If there are any issues, instead of leaving a bad review please join the Discord so that we can help you!

Themis is an anti cheat with a focus on accuracy, efficiency and simplicity.
I highly recommend joining the Discord server to stay up to date and get support.
Themis supports Spigot and Paper. Other forks will probably work too, but I can't guarantee it.
Also Themis has real Bedrock/Geyser support! By "real" I mean that it actually performs proper checks on Bedrock players. Some other anti cheats simply exclude Bedrock players from the checks, which means that they can fully bypass the anti cheat. With Themis this is not the case!
Note that supporting Bedrock is more difficult than Java since it's a completely different codebase and Geyser has bugs that cause random weird behaviour (Geyser is an absolutely amazing piece of software though!), so there will be false positives. Please report them on Discord to help me fix them!
Themis has a flexible config that allows you to configure an arbitrary number of actions that can consist of an arbitrary number of commands which should be run. For each action you can define a minimum score required to run, and a score and time delay for it to be run again. All of this can be configured for each check individually. You can find the config in the config section below.
Themis currently focuses on movement hacks but will expand and detect more hacks in the future.
The plugin Anti Cheat Replay supports Themis and can be used to record players when getting punished by Themis so that the recordings can be reviewed and used as evidence later.

- BHop Speed
- Blink
- Boat Fly
- Boat Speed
- Climb / Spider
- Elytra Fly
- Fly
- Jetpack
- KillAura if it uses increased Reach
- NoFall
- OnGround Speed
- Reach
- Step
- Timer
- Vanilla Speed
- WaterWalk / Jesus
Note that this list is not complete. Some checks can catch hacks they weren't even designed for, and some hacks can have many different names in different hack clients, so even if a hack is not on this list, there's a chance it's blocked anyways, especially if it's similar to the ones listed.

Themis doesn't just promise efficiency, it also delivers it. This is a timings report over an hour of a server running Themis 0.8.1 with all checks enabled and about 15 players online.
It shows that on average Themis uses 0.23% of the tick, which is about 0.015% per player. Of course this number will vary, depending on your server hardware and setup (plugins, gamemodes, ...).
For comparison, as of writing this (13th April 2021), AAC has a similar statistic on its plugin page where it uses 3.92% for 140-150 players which is about 0.026% to 0.028% per player, so Themis is almost twice as fast.
(Note that this is not at all a fair comparison since AAC has a lot more features than Themis! I didn't put this here to say Themis is better, I just think the statistic alone will be meaningless to most people, so I wanted some reference point, and I chose AAC because it's a well optimized anti cheat, it's widely known and it has a similar statistic on its plugin page.)
If you notice any mistakes in these calculations please let me know!

To install Themis, please carefully follow these steps:
- Make sure you're running version 1.17.X, 1.18.X or 1.19.X, 1.20.X or 1.21.X of Spigot or Paper. Other forks will probably work too, but I don't guarantee it.
- Download the Themis .jar file from this page and drop it in your plugins directory. (You don't need ProtocolLib anymore, starting with version 0.17.0)
- Only if your server allows Bedrock players: Install Floodgate to allow Themis to check if a player is using Bedrock and to adjust the checks accordingly (both 1.0 and 2.0 are supported). Note that you need the Bukkit version installed on every server where Themis is running, the Bungee version is not enough! If you're using Bungee, you need to set the
send-floodgate-data option in the Bungee Floodgate option, otherwise the Floodgate API won't work. It is also highly recommended to enable forward-player-ping in the Geyser config, otherwise Themis will not be able to measure the ping of Bedrock players.
- Now restart the server, to make it load all the changes. Run /themis to check if the installation worked. If it didn't, please check the troubleshooting section below.
- Only if your server allows Bedrock players: Run
/themis info [PlayerName] on a Bedrock player and make sure Themis correctly reports it as a Bedrock player, otherwise something with your Floodgate setup is wrong. If not, make sure you enabled the send-floodgate-data like mentioned above and join the Discord server for assistance.

Problem: Themis isn't working
If you installed Themis, but it didn't work, please try running /themis to see if Themis is running. Note that you need the themis.command.info permission, by default everyone has it but your permission plugin might be disabling it.
If it worked:
This means that Themis was loaded and is running correctly. If you're not getting any detections, first please check the "Blocked Hacks" section below make sure that the hack your testing is supported by Themis. If it is, it might not show up because you have the bypass permission. This is disabled by default (even for ops), but you might get it from your permissions plugin, e.g. if you have * perms. If you have LuckPerms, you can use /lp user [Username] permission check themis.bypass to see if you have the permission, other permission plugins probably offer similar commands. If you're sure that Themis is running and that you don't have the bypass permission, but you're still not getting any detections, please join the Discord for assistance.
If it didn't work:
This means that something went wrong while loading Themis. Try running /pl and see if Themis shows up.
- If it doesn't show up, it probably means that you didn't place the .jar file in the right directory, or you didn't restart the server after doing so. Make sure the .jar file is in the plugins directory and restart the server. If this doesn't help, please join the Discord for more information.
- If it shows up in red, this most likely means that you're not on a supported Minecraft version. If this isn't the problem, please check the logs for more information and join the Discord for assistance.
When asking for support on Discord because something is not working, please directly include the log file. It contains a lot of helpful information and will make helping you easier and faster!
Problem: Bedrock players are getting flagged
Run /themis info [player name]" on a Bedrock player and check if Themis correctly detects them as a Bedrock player. If not that means you don't have Floodgate set up correctly. This is not a Themis issue! Often this can be solved by changing the "send-floodgate-data" in the Bungee/Velocity Floodgate config to true.
Problem: Bedrock players always have 0 ping
You need to enable the forward-player-ping option in the Geyser config.

As of version 0.14.0, this is the default config:
Default Config
----------------------------------------------------------------------------------------------------
# Welcome to the Themis configuration file!
#
# This config file was generated from Themis version 0.14.0
# --> if you're using a newer version of Themis you should check the changelog to see if your config needs to be updated.
# If you want to update your config file, you can either change it manually, or rename this file which will lead to a new
# up to date one being generated on the next server restart.
#
# Important: This configuration file allows you to change every single setting for each check individually for maximum
# flexibility. Often however you'll want to use the same values for most of the checks. Because of this, there is the
# "default" section, which defines the default values for all checks, and these can then be overwritten in the check
# specific sections below.
# For example if you wanted to disable the tickrate check, you could overwrite the "enable" setting by adding it like this:
# ----------
# tickrate: <-- this should already be in the config, remove the {} at the end if it's still there
# enable: false <-- this is what you add
# ----------
#
# All values are either booleans (true / false) or doubles (1.0, 2.5, -123.456, ...).
# All time values are in seconds.
#
# If you have any questions, problems, or just generally want to stay up to date, you can join the Themis Discord:
# https://discord.gg/jjkR2EU
# However before asking questions first please read everything here carefully, this only takes a few minutes and will answer
# lots of questions. We are happy to help you on the Discord, but we often get the same questions over and over again even
# though they are already answered here.
# ----------------------------------------------------------------------------------------------------
# These are the default values which are used for all checks that don't explicitly overwrite them below
default:
# Should the check be enabled?
enable: true
# Should Themis block hacks (e.g. by dragging players back)?
block: true
# At which score should Themis start blocking the hacks?
block-threshold: 10.0
# Themis allows you to configure actions which can each run a list of arbitrary commands. You can specify exactly when
# an action should be run. Refer to the notify action below for a detailed example:
actions:
# What is the name of the action? This name needs to be unique.
notify:
# What is the minimum score for Themis to run this action?
execution-threshold: 10.0
# Which amount of new violations need to happen for this action to be repeated?
repetition-threshold: 5.0
# Which amount of time needs to pass for this action to be repeated?
repetition-delay: 10.0
# Which commands should be run? You can specify as many as you'd like which will be run in the order they're listed.
# Currently, you can use the following placeholders: %player_name%, %detection_type%, %score%, %ping%, %tps%
commands:
- "themis notify §5[Themis] §4%player_name% §cwas flagged for §4%detection_type% §chacks!\n§c[Score: §4%score% §c| Ping: §4%ping% §c| TPS: §4%tps%§c]"
# Should only Bedrock Edition players be checked and Java Edition players be ignored?
bedrock-only: false
# Until which maximum ping should Themis check players? Themis will not check player who have a higher ping than this.
# Warning: Hacked clients can fake a high ping, use this setting with caution!
# Set to -1.0 to always check
max-ping: -1.0
# Until which minimum TPS should Themis perform checks? Themis will not check any players when the server's TPS are below this value
# Set to -1.0 to always check
min-tps: -1.0
# After which amount of time should violations expire?
# Set this to -1.0 to disable this feature and store violations until the server is restarted
violation-expiration: 900.0
# Note: It is totally fine if the sections below are empty. Please refer to the third paragraph at the top of the
# configuration for the explanation. The {} marks it as an empty section, you need to remove when adding settings.
# This checks movement while in a boat
# Ingame name: Boat Movement
# Hacks that can trigger this: BoatFly, BoatSpeed, ...
boat_movement: {}
# This checks movement while flying with an elytra
# Ingame name: Elytra Flight
# Hacks that can trigger this: Elytra+, Extra Elytra, ...
elytra_flight: {}
# This checks horizontal movements (along the x- and z-axis).
# Ingame name: Speed
# Hacks that can trigger this: All types of Speed, Fly, ...
horizontal_movement: {}
# This checks for some impossible packets
# Ingame name: Illegal Packets
# Hacks that can trigger this: Fly (e.g. in Aristois or Inertia), ...
illegal_packets: {}
# This checks for a certain type of illegal packet data which is used in many movement hacks.
# Ingame name: Spoofed Packets
# Hacks that can trigger this: NoFall, WaterWalk/Jesus, some Fly and Speed hacks, ...
packet_spoof: {}
# This checks if a player is hitting entities farther away than they should be able to.
# Ingame name: Read
# Hacks that can trigger this: Reach, KillAura
reach: {}
# This check detects if a client is speeding up the time, which means it can e.g. move faster.
# Ingame name: Timer / Blink
# Hacks that can trigger this: Timer, Blink, ...
tickrate: {}
# This checks vertical movements (along the y-axis).
# Ingame name: Flight / Y-Movement
# Hacks that can trigger this: Fly, Glide, Jetpack, HighJump, Step, some Speed modes, ...
vertical_movement: {}

/themis
Shows if Themis is running and which version is installed
/themis help
Lists Themis' commands and their descriptions
/themis info <player name>
Shows violations scores and other information about a player
/themis notifications [on|off]
Toggles or shows notification settings
/themis notify <message>
Sends an anti cheat notification to everyone with the themis.notify permission, this is meant to be used in the config file, not directly ingame
/themis reload
Reloads the config to make changes take effect

themis.bypass
Bypass all of Themis' checks
default: false
themis.bypass.[checkName]
Bypass a specific Themis check, replace [checkName] with the name of a check (uses the same names as in the config, e.g. themis.bypass.vertical_movement for the fly check)
default: false
themis.silent
Make Themis' checks silent, i.e. they won't block hacks
default: false
themis.silent.[checkName]
Make a specific Themis checks silent, i.e. they won't block hacks, replace [checkName] with the name of a check (uses the same names as in the config, e.g. themis.bypass.vertical_movement for the fly check)
default: false
themis.notifications
description: Receive detection notifications
default: op
themis.technical
description: Receive technical notifications, for example about updates or detected problems
default: op
themis.command.base
description: Use /themis to see if Themis is running and which version is installed
default: true
themis.command.help
Use /themis help
default: true
themis.command.info
Use /themis info
default: op
themis.command.notify
description: Use /themis notify
default: false
themis.command.reload
description: Use /themis reload to reload the config file
default: op
评论 0
登录后参与评分
还没有评论,来抢沙发吧