AeroEngine / Aero Engineering
AeroEngine 是一款适用于 NeoForge 1.21.1 的 Create 风格附加模组,专注于航空发动机系统和飞行仪表。
本模组允许玩家以类似 Create 的方式组装航空发动机,包括燃料供应、控制逻辑和推力输出,并可将其与 Aeronautics / Sable 等物理系统连接。此外,它还提供了飞行员头盔 HUD 系统,用于实时飞行监控。
该项目仍在开发中。方块、纹理、模型、配方、Ponder 教程和游戏机制在未来的版本中可能会进行调整。
宣传视频
功能 / Features
- 模块化航空发动机结构
- 基本型、加力型和矢量喷口涡扇发动机
- 基于液体燃料运行(航空煤油)
- 红石控制的功率和加力燃烧室
- Create 风格的多方块组装
- 飞行员头盔 HUD 系统
- 坐标导航和航点
- Ponder 教程支持
- 与 Aeronautics / Sable 集成
发动机组件 / Engine Components
核心方块 / Core Blocks
- 发动机风扇 (Engine Fan) --- 进气口和发动机入口
- 发动机压气机 (Engine Compressor) --- 压缩进入的空气
- 发动机燃烧室 (Engine Combustor) --- 燃烧航空煤油并使用红石控制功率
- 发动机涡轮 (Engine Turbine) --- 驱动压气机
- 发动机尾锥 (Engine Exhaust Cone) --- 基本涡扇尾部,支持反推
- 发动机加力燃烧室 (Engine Afterburner) --- 带红石控制加力模式的加力涡扇尾部
- 矢量轴承 (Vector Bearing) --- 矢量推力控制
外壳与喷管 / Casing & Nozzle
- 发动机外壳 (Engine Casing) --- 包裹发动机核心并提高推力
- 发动机排气喷管 (Engine Exhaust Nozzle) --- 安装在发动机后部以增加额外推力
- 仿制发动机外壳 (Copycat Engine Casing) --- 可自定义发动机外壳外观,包括楼梯/台阶
- 仿制发动机喷管 (Copycat Engine Nozzle) --- 可自定义喷管外观,包括楼梯/台阶
传动 / Transmission
- 封装流体管道 (Engine Encased Fluid Pipe) --- 封装在发动机外壳内的流体管道
- 封装轴 (Engine Encased Shaft) --- 封装在发动机外壳内的轴
- 发动机齿轮箱 (Engine Gearbox) --- 动力传输和方向转换
发动机结构 / Engine Structures
- 基本涡扇发动机 (Basic Turbofan Engine)
发动机风扇 → 发动机压气机 → 发动机燃烧室 → 发动机涡轮 → 发动机尾锥
- 加力涡扇发动机 (Afterburning Turbofan Engine)
发动机风扇 → 发动机压气机 → 发动机燃烧室 → 发动机涡轮 → 发动机加力燃烧室
- 矢量涡扇发动机 (Vectoring Turbofan Engine)
发动机风扇 → 发动机压气机 → 发动机燃烧室 → 发动机涡轮 → 矢量轴承
燃料与控制 / Fuel and Control
航空煤油 / Aviation Kerosene
发动机使用航空煤油作为燃料,通过 Create 流体系统输送至发动机燃烧室。
红石控制 / Redstone Control
- 发动机燃烧室:Shift + 右键点击以配置红石频率和功率步长,从而控制发动机功率
- 发动机加力燃烧室:独立的红石频率控制,用于切换加力模式
- 发动机尾锥:红石控制反推模式
- 矢量轴承:六轴红石信号控制推力方向
飞行员头盔 / Pilot Helmet
飞行员头盔是一种可穿戴的 HUD 系统,用于实时飞行监控。
功能
- 将最多 12 个方块绑定到同一个物理结构上
- 支持多种传感器类型:高度、速度、姿态和导航
- 可自定义 HUD 显示内容和布局
- 支持重命名、隐藏和方向校正
传感器类型
| 传感器 |
功能 |
| 高度传感器 (Altitude Sensor) |
高度计 |
| 速度传感器 (Velocity Sensor) |
速度和航向 |
| 万向节传感器 (Gimbal Sensor) |
俯仰和滚转 |
| 导航表 (Navigation Table) |
航点和目标方向 |
使用方法
- 手持飞行员头盔,按住 Shift 键并右键点击一个可读方块以进行绑定
- 装备头盔并按下 HUD 管理键,默认为 H
- 选择目标以重命名它、隐藏它或配置显示项目
材料 / Materials
- 下界合金粉末 (Netherite Powder) --- 合金原材料
- 航空合金锭 (Aviation Alloy Ingot) --- 发动机制作材料
- 航空合金板 (Aviation Alloy Sheet) --- 发动机制作材料
- 发动机叶片 (Engine Blade) --- 风扇/涡轮组件
- 压气机组件 (Compressor Component) --- 压气机制作组件
- 涡轮组件 (Turbine Component) --- 涡轮制作组件
- 矢量组件 (Vector Component) --- 矢量轴承制作组件
- 坐标表单 (Coordinate Form) --- 导航航点配置
Ponder 教程 / Ponder Tutorials
AeroEngine 提供 Ponder 教程,演示发动机核心组装、燃料输入、红石控制、外壳封装以及加力涡扇结构。
目前包含:
- basic_turbofan_engine — 基本涡扇发动机操作
- afterburning_turbofan_engine — 加力涡扇发动机操作
- afterburning_vector_turbofan_engine — 矢量加力涡扇发动机操作
- pilot_helmet — 飞行员头盔绑定与配置
兼容性 / Compatibility
AeroEngine 当前基于 Minecraft 1.21.1 + NeoForge 构建。跨版本兼容通常需要单独移植,仅扩展支持版本范围并不能保证兼容性。
声明的运行时范围 / Declared runtime ranges
JEI 为可选依赖:安装 JEI 后,将启用配方和用途显示;未安装 JEI 时,模组仍应正常加载。
开发 / Development Notes
该项目仍处于早期开发阶段。目前的工作主要包括引擎方块、流体系统、粒子效果、渲染、多块结构验证以及 Ponder 场景。
未来改进计划包括:
- 生存模式下的配方 / Survival mode recipes
- 推力计算 / Thrust calculation
- 音效 / Engine sound effects
- 动画 / Animations
- 平衡性调整 / Balance adjustments
许可证 / License
本项目采用 All Rights Reserved 协议。
版权所有 (c) 2026 cxw
编译后的模组 JAR 文件可免费分发用于 Minecraft,但源代码不得复制、修改或重新分发。
AeroEngine / Aero Engineering
AeroEngine is a Create-style add-on mod for NeoForge 1.21.1, focused on aero-engine systems and flight instruments.
This mod allows players to assemble an aero engine in a Create-like way, with fuel supply, control logic, and thrust output, and connect it to physics systems such as Aeronautics / Sable. It also provides a Pilot Helmet HUD system for real-time flight monitoring.
The project is still in development. Blocks, textures, models, recipes, Ponder tutorials, and gameplay mechanics may be adjusted in future versions.
promotional video
Features / Features
- Modular aero-engine structure / Modular aero-engine structure
- Basic, afterburning and vectoring turbofan engines / Basic, afterburning and vectoring turbofan engines
- Liquid fuel based operation / Liquid fuel based operation (Aviation Kerosene)
- Redstone-controlled power and afterburner / Redstone-controlled power and afterburner
- Create-style multiblock assembly / Create-style multiblock assembly
- Pilot Helmet HUD system / Pilot Helmet HUD system
- Coordinate navigation and waypoints / Coordinate navigation and waypoints
- Ponder tutorial support / Ponder tutorial support
- Integration with Aeronautics / Sable / Integration with Aeronautics / Sable
Engine Components / Engine Components
Core Blocks / Core Blocks
- Engine Fan--- Engine Fan--- Air intake and engine inlet
- Engine Compressor--- Engine Compressor--- Compresses incoming air
- Engine Combustor--- Engine Combustor--- Burns aviation kerosene and uses redstone to control power
- Engine Turbine---Engine Turbine--- Drives the compressor
- Engine Exhaust Cone--- Engine Exhaust Cone--- Basic turbofan tail section with reverse thrust support
- Engine Afterburner--- Engine Afterburner--- Afterburning turbofan tail section with redstone-controlled afterburner mode
- Vector Bearing--- Vector Bearing--- Vector thrust control
Casing & Nozzle / Casing & Nozzle
- Engine Casing--- Engine Casing--- Encloses the engine core and improves thrust
- Engine Exhaust Nozzle--- Engine Exhaust Nozzle--- Installed at the rear of the engine for additional thrust
- Copycat Engine Casing--- Copycat Engine Casing--- Customizable engine casing appearance, including stairs/slabs
- Copycat Engine Nozzle--- Copycat Engine Nozzle--- Customizable nozzle appearance, including stairs/slabs
Transmission / Transmission
- Engine Encased Fluid Pipe--- Engine Encased Fluid Pipe--- Fluid pipe enclosed in engine casing
- Engine Encased Shaft--- Engine Encased Shaft--- Shaft enclosed in engine casing
- Engine Gearbox--- Engine Gearbox--- Power transmission and direction conversion
Engine Structures / Engine Structures
- Basic Turbofan / Basic Turbofan Engine
Engine Fan → Engine Compressor → Engine Combustor → Engine Turbine → Engine Exhaust Cone
- Afterburning Turbofan / Afterburning Turbofan Engine
Engine Fan → Engine Compressor → Engine Combustor → Engine Turbine → Engine Afterburner
- Vectoring Turbofan / Vectoring Turbofan Engine
Engine Fan → Engine Compressor → Engine Combustor → Engine Turbine → Vector Bearing
Fuel and Control / Fuel and Control
Aviation Kerosene / Aviation Kerosene
Engines use Aviation Kerosene as fuel, which is supplied to the Engine Combustor through the Create fluid system.
Redstone Control / Redstone Control
- Engine Combustor: Shift + Right Click to configure redstone frequency and power step, controlling engine power
- Engine Afterburner: Independent redstone frequency control for toggling afterburner mode
- Engine Exhaust Cone: Redstone-controlled reverse thrust mode
- Vector Bearing: Six-axis redstone signal control for thrust direction
Pilot Helmet / Pilot Helmet
The Pilot Helmet is a wearable HUD system used for real-time flight monitoring.
Features
- Bind up to 12 blocks to the same physical structure
- Supports multiple sensor types: altitude, velocity, attitude, and navigation
- Customizable HUD display content and layout
- Supports renaming, hiding, and direction correction
Sensor Types
Sensor Function
- Altitude Sensor (Altitude Sensor)----Altimeter
- Velocity Sensor (Velocity Sensor)----Speed and heading
- Gimbal Sensor (Gimbal Sensor)----Pitch and roll
- Navigation Table (Navigation Table)----Waypoints and target direction
Usage
- Hold the Pilot Helmet and Shift + Right Click a readable block to bind it
- Equip the helmet and press the HUD management key, default H
- Select a target to rename it, hide it, or configure displayed items
Materials / Materials
- Netherite Powder---- Netherite Powder---- Alloy raw material
- Aviation Alloy Ingot---- Aviation Alloy Ingot---- Engine crafting material
- Aviation Alloy Sheet---- Aviation Alloy Sheet---- Engine crafting material
- Engine Blade---- Engine Blade---- Fan/turbine component
- Compressor Component---- Compressor Component---- Compressor crafting component
- Turbine Component---- Turbine Component---- Turbine crafting component
- Vector Component---- Vector Component---- Vector bearing crafting component
- Coordinate Form---- Coordinate Form---- Navigation waypoint configuration
Ponder Tutorials / Ponder Tutorials
AeroEngine provides Ponder tutorials to demonstrate engine core assembly, fuel input, redstone control, casing enclosure, and afterburning turbofan structures.
Currently included:
- basic_turbofan_engine — Basic turbofan engine operation
- afterburning_turbofan_engine — Afterburning turbofan engine operation
- afterburning_vector_turbofan_engine — Vectoring afterburning turbofan engine operation
- pilot_helmet — Pilot Helmet binding and configuration
Compatibility / Compatibility
AeroEngine is currently built for Minecraft 1.21.1 + NeoForge. Cross-version Minecraft compatibility usually requires a separate port and cannot be guaranteed simply by expanding the supported version range.
Declared runtime ranges / Declared runtime ranges
JEI is an optional dependency: when JEI is installed, recipe and usage display will be enabled; without JEI, the mod should still load normally.
Development / Development Notes
The project is still in early development. Current work mainly includes engine blocks, fluid system, particles, rendering, multiblock validation, and Ponder scenes.
Future improvements will include:
- survival recipes / Survival mode recipes
- thrust calculation / Thrust calculation
- sound effects / Engine sound effects
- animations / Animations
- balancing / Balance adjustments
License / License
This project is licensed under All Rights Reserved.
Copyright (c) 2026 cxw
The compiled mod, JAR file, may be freely distributed for use in Minecraft, but the source code may not be copied, modified, or redistributed.
评论 0
登录后参与评分
还没有评论,来抢沙发吧