信标范围
精确查看信标或潮涌核心的作用范围。注视一个信标,其范围便会显示在周围——固定它,在你建造时范围依然可见。

注视信标
注视任何激活的信标——即使距离高达 96 格远——其范围便会显现:
- 发光边缘标记范围的角落。
- 墙壁在靠近信标处清晰可见,向天空方向逐渐淡出。
- 与你高度平齐的线条环绕范围一圈,让你清楚看到在你站立位置的范围终点。
- 等级和范围数值显示在你的准星下方。
颜色代表等级:
| 等级 | 范围 | 颜色 |
|---|---|---|
| 1 | 20 格 | 青色 |
| 2 | 30 格 | 绿色 |
| 3 | 40 格 | 金色 |
| 4 | 50 格 | 红色 |

该范围与 Minecraft 原版完全一致:效果向每个方向延伸 20 至 50 格,向下同样深度,并一直延伸至天空。你的碰撞箱只需触及范围即可。

大多数信标放置在地面上,因此其下方的部分会被泥土隐藏。如果将其放置在塔上,你会看到范围在信标下方的半空中结束:

潮涌核心
注视潮涌核心,其范围会以球体形式显示——处于水中或雨中的玩家会获得潮涌之力。大小取决于框架方块数量:
| 框架方块数 | 范围 |
|---|---|
| 16 - 20 | 32 格 |
| 21 - 27 | 48 格 |
| 28 - 34 | 64 格 |
| 35 - 41 | 80 格 |
| 42 (满配) | 96 格 |
使用满配框架时,会显示一个红色方框表示潮涌核心攻击敌对生物的区域(围绕其 8 格)。在你的准星下方,你可以看到范围和已放置的框架方块数量。通过 /beaconrange pin 命令或固定键来固定潮涌核心。

固定它
打开信标界面并点击固定范围。当你移开视线或走开后,范围依然可见,以便你围绕它规划基地。按钮旁边会显示等级和范围数值。

- 可以固定任意数量的信标和潮涌核心,并查看它们的范围重叠区域。
- 固定状态按世界和服务器保存,离开、切换维度或重新加入后仍保持固定。
- 即使区块未加载,它们也保持可见。
- 被破坏的信标会自动取消固定。在隐藏方块的服务器上(反 X 射线用深板岩替换你的信标),点击 固定范围 旁边的锁图标——然后固定将一直保持,直到你手动移除。
命令
| 命令 | 功能 |
|---|---|
/beaconrange list |
列出当前维度中所有固定的信标,包括等级、坐标和距离。点击红色的 ✖ 取消固定其中一个。当前方块不存在的固定项会被标记。 |
/beaconrange pin |
固定或取消固定你正在注视的信标或潮涌核心。 |
/beaconrange remove x y z |
取消固定指定坐标的一个固定项(按 Tab 获取建议)。 |
/beaconrange clear |
清除当前世界中所有固定项。 |

设置
通过 Mod Menu 打开设置:
- 注视时显示 和 准星下方信息显示 的开/关
- 墙壁:淡出、全高或关闭——以及其强度
- 边缘 和 与你高度平齐的线条 的开/关
- 颜色:为每个等级选择一种颜色,或使用光束颜色——用染色玻璃染光束,范围颜色随之改变
- 潮涌核心:显示其范围、颜色和攻击框
- 自动取消固定 的开/关(与锁按钮功能相同)


在 选项 > 控制 > 按键绑定 > Beacon Range 下,你可以绑定按键以固定你正在注视的信标或潮涌核心(无需打开界面)、隐藏所有范围和打开设置。默认情况下这些按键未绑定。
须知
- 纯客户端模组:适用于任何服务器,服务器端无需安装任何东西。
- 首次启动包含此模组的配置文件时,会有一个简短教程展示其工作原理。你可以在 设置 > 帮助 中再次打开它。
- 适用于 Minecraft 1.21.11, 26.2 和 26.3。
- 提供英文和德文支持。
需要 Fabric API。Mod Menu 为可选。
Beacon Range
See exactly where the effects of a beacon - or a conduit - reach. Look at one and its range appears around it - pin it, and it stays visible while you build.

Look at a beacon
Look at any active beacon - even from up to 96 blocks away - and its range appears:
- Glowing edges mark the corners of the range.
- Walls are strong up to the beacon and fade out towards the sky.
- A line at your height runs around the range, so you see where it ends right where you stand.
- Level and range show under your crosshair.
The color shows the level:
| Level | Range | Color |
|---|---|---|
| 1 | 20 blocks | Aqua |
| 2 | 30 blocks | Green |
| 3 | 40 blocks | Gold |
| 4 | 50 blocks | Red |

The range matches Minecraft exactly: the effects reach 20 to 50 blocks to each side, just as far down, and all the way up to the sky. Your hitbox only has to touch the range.

Most beacons stand on the ground, so the part below them is hidden in the earth. Put one on a tower and you see the range end in mid-air below it:

Conduits
Look at a conduit and its range appears as a sphere - players inside it get Conduit Power while they are in water or rain. The size depends on the frame:
| Frame blocks | Range |
|---|---|
| 16 - 20 | 32 blocks |
| 21 - 27 | 48 blocks |
| 28 - 34 | 64 blocks |
| 35 - 41 | 80 blocks |
| 42 (full) | 96 blocks |
With a full frame a red box shows where the conduit attacks hostile mobs (8 blocks around it). Under your crosshair you see the range and how many frame blocks are in place. Pin a conduit with /beaconrange pin or the pin key.

Pin it
Open the beacon and click Pin range. The range stays visible when you look away or walk off, so you can plan your base around it. Next to the button you see the level and range.

- Pin as many beacons and conduits as you like and see where their ranges overlap.
- Pins are saved per world and server and stay pinned when you leave, change dimension or rejoin.
- They stay visible even when the chunk is not loaded.
- A beacon that is broken is unpinned automatically. On servers that hide blocks (anti-xray shows deepslate instead of your beacon), click the lock next to Pin range - then pins stay until you remove them yourself.
Commands
| Command | What it does |
|---|---|
/beaconrange list |
Everything pinned in this dimension with level, coordinates and distance. Click the red ✖ to unpin one. Pins whose block is not there right now are marked. |
/beaconrange pin |
Pins (or unpins) the beacon or conduit you look at. |
/beaconrange remove x y z |
Unpins one (press Tab for suggestions). |
/beaconrange clear |
Unpins everything in this world. |

Settings
Open the settings through Mod Menu:
- Show when looking and Info under crosshair on or off
- Walls: fade out, full height or off - and how strong they are
- Edges and the line at your height on or off
- Colors: pick a color for each level, or use the beam color - dye the beam with stained glass and the range follows
- Conduits: show their ranges, their color and the attack box
- Unpin automatically on or off (same as the lock button)


Under Options > Controls > Key Binds > Beacon Range you can bind keys to pin the beacon or conduit you look at (without opening it), hide all ranges and open the settings. They are unbound by default.
Good to know
- Purely client-side: works on any server, nothing needs to be installed there.
- A short tour shows how it works the first time you start a profile with this mod. You can open it again under Settings > Help.
- For Minecraft 1.21.11, 26.2 and 26.3.
- English and German.
Requires Fabric API. Mod Menu is optional.
下载 Beacon Range
下载 Beacon Range
下载 Beacon Range
下载 Beacon Range
下载 Beacon Range
下载 Beacon Range
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Beacon Range
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
下载 Beacon Range
需要联机服务器吗?
稳定流畅、一键部署,几分钟即可和朋友联机开服
最低仅需 8 元/月 即可畅快联机
2.1.0
- 导管(Conduits):注视导管即可查看其范围球体——范围为 32 至 96 格,具体取决于其框架。使用完整框架时,红色方框会显示其攻击怪物的区域
- 新增
/beaconrange pin命令:固定你注视的灯塔或导管(使用固定按键也可实现相同效果) - “Pin range”(固定范围)旁边新增锁定按钮:在隐藏方块(反透视显示深板岩以替代你的灯塔)的服务器上,可关闭自动取消固定功能,使你的固定标记得以保留。该选项也位于设置中
/beaconrange list命令会将当前方块不存在的固定标记标出- 教程和图片现在展示了范围也会延伸至灯塔下方;更新了全新、更清晰的图片,避免了范围重叠
- 注视灯塔金字塔(或导管的框架)即可查看其范围——当你站在灯塔下方且只能看到金字塔时非常实用
- 修复:当服务器在该位置显示其他方块时(反透视机制),固定标记会被立即移除——现在仅当你在附近且灯塔消失时才会移除
- 修复:光束被阻挡的灯塔曾被显示为激活状态,尽管它并未提供任何效果
- 修复:在服务器上,当灯塔界面稍晚打开时,“Pin range”可能会固定到相邻的灯塔
- 修复:半加载的金字塔可能会被记住一个过小的等级,且已拆除的灯塔会从记忆中恢复为满级大小
- 修复:保存过程中崩溃可能导致所有固定标记丢失,且一个损坏的条目会导致所有固定标记被清除
- 设置中的“Unpin all”(取消全部固定)会先进行确认;屏幕意外关闭时设置也会被保存
- 墙壁不再在你的渲染距离之外绘制,否则它们会在雾中发光穿透出来
- 修复:从外部观察时,墙壁看起来比预期暗得多,因为两侧都被绘制了出来
2.0.1
- 修复:范围边缘一直完全明亮直至天空——现在它们在灯塔上方会逐渐淡出,与墙壁效果一致
- 作用范围现在与 Minecraft 完全一致:向每个方向延伸 20 至 50 个方块,并一直延伸至天空(此前,方框在垂直方向上的高度仅与其水平方向的最大距离相同)
- 全新外观:发光边缘、随高度升高逐渐淡出的墙体,以及在你所在高度处的范围边界线
- 从最远 96 个方块外观察信标即可查看其作用范围——等级和范围信息会显示在你的准星下方
- 已固定的信标按世界和服务器分别保存,即使离开游戏、切换维度或重新加入,固定状态依然保留
- 修复了当你走开后,由于区块卸载导致已固定的信标丢失的问题
- 信标界面顶部新增“固定范围”按钮,旁边显示当前等级与作用范围
- 新增按键(默认未绑定):固定你正在观察的信标、隐藏所有范围指示、打开设置
- Mod Menu 中的设置选项:可为每个等级单独设置颜色或光束颜色,调整墙体样式与透明度、边缘效果及高度线的显示
/beaconrange list命令可显示等级、坐标和距离;/beaconrange remove命令需传入x y z参数- 损坏的信标会自动取消固定
- 德语翻译支持
- 首次启动时提供欢迎引导,更新后显示“新增内容”屏幕
- 全新图标
- 专为 Minecraft 1.21.11 制作
版本 1.0.2
新增 "/beaconrange list" 命令
"/beaconrange list" 现在会显示已标记信标的列表。 现在可以使用列表条目旁边的红色 X 来取消标记已标记的信标!
关于这个资源的讨论、问题反馈与使用心得
还没有讨论,来发第一帖吧
你是这个资源的作者?登录后可认领此资源。
相似资源
模组
缓冲的原始输入和线程化的事件轮询
模组
一个用于收集生物掉落物的多区块模组。
模组
可定制的鞘翅模组,支持装饰纹饰、旗帜图案等更多功能!
模组
显示你正在注视的方块的信息。(适用于 Minecraft 1.16+ 的 Hwyla/Waila 分支)
模组
查看物品与配方
模组
原版世界生成优化模组
评论 0
登录后参与评分
还没有评论,来抢沙发吧