BlockMixer • Fabric 模组
描述
此模组旨在简化建造过程。
工作原理
放置方块后,模组会从 BlockMixer 绑定的快捷栏中随机选择一个槽位,并自动将玩家的选择切换至该槽位。
依赖项
Fabric
Fabric API
loth Config API
Mod Menu
特性
- 不同的混合模式:
默认:随机选择槽位;不重复:槽位不能在连续两次中被选中;不重复 [2]:槽位不能在连续三次中被选中。
- 可调整槽位权重(比例):
槽位权重设置允许你选择 BlockMixer 优先选择的槽位。因此,如果将一个槽位的权重设置为 10,另一个设置为 1,则第一个槽位被选中的概率会更高(约为 10:1)。
使用方法
基本用法
要将快捷栏绑定或解绑到 BlockMixer,请点击 B 键。已绑定的快捷栏会以绿色指示器高亮显示。
不同混合模式
要切换混合模式,请进入模组设置(需要 Mod Menu)。
“启用/禁用模组”选项
此选项用于在不清除 BlockMixer 绑定槽位的情况下禁用模组。要切换模组状态,请按“潜行”键(默认为 Shift)+ “切换快捷栏槽位”键(默认为 B),即 Shift+B。所有已绑定的槽位将以红色指示器高亮显示。

“槽位权重”选项
要增加槽位权重,请按 ] 键(默认为 ])。要减少槽位权重,请按 [ 键(默认为 [)。

BlockMixer • Fabric Mod
Description
This mod is designed to ease the building process.
How it works
After you put the block, the mod chooses a random slot from BlockMixer's binded slots and automatically switches your character's selection to it.
Requirements
Fabric
Fabric API
loth Config API
Mod Menu
Features
- Different mixing modes:
Default: random selection of slots, Non-repeating: slot cannot be repeated twice in a row, Non-repeating [2]: the slot cannot be repeated three times in a row.
- Ability to adjust slot ratio:
The slot ratio setting allows you to select the priority slot that BlockMixer will select. Thus, by setting the ratio to 10 for one slot and 1 for the other, the first slot will randomize more often at 10.
How to use
Basic usage
To bind and unbind a slot to BlockMixer click B. The binded slot will be highlighted with a green indicator.
Different mixing modes
To select mixing mode go to mod settings (Mod Menu required).
"Toggle Mod" option
This option is for disable mod without cleaning BlockMixer's binded slots. To toggle mod press "Sneak" button (Shift by default) + "Toggle hotbar slot" button (B by default), Shift+B. All binded slots will be highlighted with a red indicator.

"Slot ratio" option
To increase slot ratio press ] (by default). To decrease slot ratio press [ (by default).

评论 0
登录后参与评分
还没有评论,来抢沙发吧