Colossal Reactors
建造并运行大型多方块核反应堆以生成电力。向其投入燃料和冷却剂,然后从电力端口提取 RF。使用反应堆构建器自动化建造过程,使用熔炉将物品转化为流体,并使用加热线圈提供热量。
反应堆
反应堆是一个由反应堆外壳和反应堆玻璃构成的空心箱体。在里面放置反应堆棒(用于容纳燃料)和冷却剂:可以是方块(例如钻石块、水方块),也可以是液体(例如水)。冷却剂的效率越高,获得的电力和能效就越高。
- 反应堆控制器 — 放置在反应堆上(例如顶部)。打开它以查看状态、稳定性、能量输出,并对多方块结构进行重启。
- 棒控制器 — 控制反应堆棒的插入深度。插入越深,产生的电力和热量越多;你需要通过冷却剂来平衡这一点,以避免过热。
- 资源端口 — 投入固体燃料和冷却剂流体,并抽出核废料和用过的冷却剂。
- 电力端口 — 在此连接线缆以输出 RF。
- 红石端口 — 可选功能。使用它通过红石信号开启或关闭反应堆,或者要求必须有红石信号才能运行。
你需要燃料(例如铀基燃料)以及一种使反应堆保持冷却的方法。控制器屏幕会显示反应堆是否有效以及产生多少电力。
反应堆构建器
反应堆构建器可以自动化构建反应堆多方块结构。你可以设置尺寸(宽、深、高),选择棒排列模式,并向其库存中装入外壳、玻璃、反应堆棒、棒控制器,以及可选的冷却剂方块或装有冷却剂流体的储罐。
当开始建造时,它会先放置框架,然后是棒控制器和反应堆棒,最后根据你在构建器中选择的冷却剂类型放置冷却剂(来自储罐的液体或来自库存的方块)。它不会在你已经存在液态冷却剂的地方放置方块,并且只会放置你选择的冷却剂类型(例如,如果你选择了钻石块选项,它就只放置钻石块)。
使用它可以快速且一致地建造巨型反应堆。
熔炉
熔炉可以将物品转化为流体(例如将锭转化为熔融金属)。它有一个物品槽和一个流体罐。它不能单独工作:它至少在一侧(上、下或四个水平面)需要热源。有效的热源包括岩浆、营火、火把或加热线圈。加热线圈提供的热量最好,是设计用来驱动熔炉的方式;岩浆和营火也可以使用。受热面越多,熔化速度越快。
放置熔炉,在其旁边放置热源(例如加热线圈、岩浆或营火),投入相应的物品,它就会生产对应的流体。你可以从前方面使用管道抽出流体。
加热线圈
加热线圈是使熔炉工作的关键。它们必须放置在熔炉的旁边(六个面中的任意一个)。每种线圈类型“燃烧”某种物质来产生热量:
- 资源加热线圈 — 消耗其前方面的流体和/或物品(例如水、燃料物品)。你将所需物质导入其中;它会产生热量并将热量传递给熔炉。
- 能源加热线圈 — 消耗其前方面的 RF。将电力导入其中;它无需任何流体或物品即可为熔炉提供热量。
因此,你可以使用蒸汽和燃料(资源线圈)或纯电力(能源线圈)来运行熔炉。线圈正面有简单的界面,用于配置输入,对于资源线圈,还可以配置消耗物。
总结
- 反应堆 — 燃烧燃料和冷却剂以产生 RF 的多方块结构;你需要管理反应堆棒和冷却剂以确保电力和稳定性。
- 反应堆构建器 — 从库存和储罐中为你建造反应堆;你可以选择尺寸、棒布局以及冷却剂类型。
- 熔炉 — 将物品熔化为流体;需要从相邻的岩浆、营火、火把或加热线圈获取热量。
- 加热线圈 — 使用流体/物品(资源线圈)或 RF(能源线圈)提供所需的热量。
Colossal Reactors
Build and run large multiblock nuclear reactors to generate power. Feed them fuel and coolant, then extract RF from a power port. Use the Reactor Builder to automate construction, the Melter to turn items into fluids, and Heating Coils to supply heat.
Reactor
A reactor is a hollow box made of reactor casing and reactor glass. Inside you place reactor rods (they hold the fuel) and coolant: either blocks (e.g. diamond blocks, water blocks) or liquids (e.g. water). The better the coolant, the more power and efficiency you get.
- Reactor Controller — Place it on the reactor (e.g. on top). Open it to see status, stability, energy output, and to reboot the multiblock.
- Rod Controller — Controls how far the rods are inserted. More insertion = more power and heat; you balance this with coolant to avoid overheating.
- Resource Port — Insert solid fuel and coolant fluid, and extract nuclear waste and spent coolant.
- Power Port — Connect cables here to take out RF.
- Redstone Port — Optional. Use it to turn the reactor on or off with redstone, or to require a redstone signal to run.
You need fuel (e.g. uranium-based) and a way to keep the reactor cool. The controller screen shows you if the reactor is valid and how much power it produces.
Reactor Builder
The Reactor Builder automates building the reactor multiblock. You set the size (width, depth, height), choose a rod pattern, and fill its inventory with casing, glass, reactor rods, rod controllers, and optionally coolant blocks or a tank of coolant fluid.
When you start the build, it places the frame, then rod controllers and rods, then coolant (liquid from the tank or blocks from inventory) according to the coolant type you selected in the builder. It will not place blocks where you already have liquid coolant, and it only places the coolant type you chose (e.g. only diamond blocks if you selected that option).
Use it to build colossal reactors quickly and consistently.
Melter
The Melter turns items into fluids (e.g. ingots into molten metal). It has a single item slot and a fluid tank. It does not work alone: it needs a heat source on at least one of its sides (up, down, or the four horizontals). Valid heat sources are lava, campfires, torches, or Heating Coils. Heating Coils give the best heat and are the intended way to run the Melter; lava and campfires work too. More heated sides mean faster melting.
Place the Melter, put heat next to it (e.g. Heating Coils, or lava, or campfires), feed it the right items and it will produce the corresponding fluid. You can pull the fluid out with pipes from the front face.
Heating Coils
Heating Coils are what make the Melter work. They must be placed next to the Melter (any of the six sides). Each coil type “burns” something to produce heat:
- Resource Heating Coil — Consumes fluids and/or items from its front face (e.g. water, fuel items). You pipe in what it needs; it heats up and passes heat to the Melter.
- Energy Heating Coil — Consumes RF from its front face. Pipe power in; it heats the Melter with no fluids or items.
So you can run the Melter with steam and fuel (resource coil) or with pure power (energy coil). Coils have a simple interface on the front to configure input and, for the resource coil, what to consume.
Summary
- Reactor — Multiblock that burns fuel and coolant to make RF; you manage rods and coolant for power and stability.
- Reactor Builder — Builds the reactor for you from inventory and tank; you choose size, rod layout, and coolant type.
- Melter — Melts items into fluids; needs heat from adjacent lava, campfires, torches, or Heating Coils.
- Heating Coils — Supply that heat using either fluids/items (resource coil) or RF (energy coil).
下载 Colossal Reactors
下载 Colossal Reactors
下载 Colossal Reactors
下载 Colossal Reactors
下载 Colossal Reactors
下载 Colossal Reactors
下载 Colossal Reactors
下载 Colossal Reactors
下载 Colossal Reactors
下载 Colossal Reactors
错误修复:
- 修复了在版本 1.21.1 中,当安装了 BrandonCore(Draconic 库)时,高导电端口无法与 FE/RF 配合使用的问题。该问题仅在基于 OP 能量(标准 Draconic)的组件上才能正常工作。
- 修复了涡轮机再次无法正常工作的错误。
关于这个资源的讨论、问题反馈与使用心得
还没有讨论,来发第一帖吧
你是这个资源的作者?登录后可认领此资源。
相似资源
模组
一个用于收集生物掉落物的多区块模组。
模组
让你能够在世界中的任何位置定位结构。
模组
一款轻量级模组,允许服务器管理员对抗透视作弊者。
模组
AE2:一款流行的自动化与存储模组
模组
基于 GTCEu 1.12.2 的现代 GregTech
模组
自动附魔,搭配 Create
评论 0
登录后参与评分
还没有评论,来抢沙发吧