PvP Analyzer
记录你的战斗。找出你的败因。变得更强。
Pv PvP Analyzer 是一个轻量级的客户端 Fabric 模组,可实时追踪你的战斗表现,并在每次战斗后提供可操作的反馈。无需服务器端组件——它只观察你的行为并告诉你需要改进的地方。
工作原理
在战斗前按 F6 开始录制。进行战斗。再次按 F6 停止录制。聊天栏会显示完整的分析结果,同时屏幕上会出现带有颜色编码统计数据的实时 HUD 叠加层。
就是这样。无需配置文件,无需设置,无需菜单。
追踪内容
精准度与时机
- 命中/未命中比例 — 你的挥击实际命中的百分比是多少
- 冷却时间时机 — 你是否点击过早导致伤害损失?
- CPS(每秒点击次数)— 你的挥击速度是否超过了冷却时间的限制?
瞄准质量
- 过甩检测 — 追踪准星 穿过 目标的情况,这意味着你甩枪过头了
- 盾牌命中百分比 — 你对着格挡玩家浪费了多少次攻击
间距与距离
- 距离分布 — 将每次命中分类为近距离 (<2.0)、中距离 (2.0-2.8)、远距离 (2.9-3.0) 或极限距离 (3.0+)
- 显示你是否靠得太近、太远,还是处于最佳距离
防御
- 跳跃重置追踪 — 检测你在受到击退后 3 个刻内跳跃的行为
- 跳跃重置百分比 — 相对于收到的总击退事件数
战后建议
每次战斗结束后,模组会分析你的统计数据并生成个性化建议:
❌ *精准度较低 (38%)。专注于点击前的跟踪。
⚠ *存在中等程度的过甩 (12%)。练习更平滑的跟踪。
⚠ *23% 的攻击过早。等待冷却完全结束——你正在损失伤害。
✅ *出色的跳跃重置 (78%)!你很好地减少了击退影响。
建议会根据你的实际数据进行调整——它们不是通用的建议。
实时 HUD
左上角有一个紧凑的叠加层,在战斗期间实时显示你的统计数据更新。颜色编码:绿色 = 表现良好,黄色 = 有待提高,红色 = 需要改进。
按 F7 切换 HUD 显示。
按键绑定
| 按键 |
操作 |
| F6 |
开始/停止录制 |
| F7 |
显示/隐藏 HUD 叠加层 |
安装
- 为 1.21.8 安装 Fabric Loader
- 安装 Fabric API
- 将
pvp-analyzer-1.0.0.jar 放入你的 mods 文件夹
- 启动游戏
常见问题
这会以任何方式修改游戏玩法吗?*
不会。它仅观察和记录。不修改数据包,不更改输入,不进行任何自动化操作。它是一个纯粹的分析工具。
这会导致我被封禁吗?
这是一个客户端观察者模组——除了正常游戏玩法外,它不与服务器交互。它相当于录制屏幕并回放录像,但具有自动统计数据追踪功能。
它在服务器上有效吗?
是的,适用于任何服务器。它追踪你的客户端动作和事件。无需服务器权限。
它会影响帧率吗?
几乎可以忽略不计。追踪逻辑每个刻只运行几次比较。HUD 是一个小型文本叠加层。你不会注意到它的影响。
依赖项:Fabric Loader 0.16.14+ · Fabric API · Minecraft 1.21+
环境:仅限客户端
许可证:MIT
Github 仓库:
PvP Analyzer
Record your fights. See where you're losing. Get better.
PvP Analyzer is a lightweight client-side Fabric mod that tracks your combat performance in real time and gives you actionable feedback after every fight. No server-side component needed — it just watches what you do and tells you what to fix.
How It Works
Press F6 to start recording before a fight. Fight. Press F6 again to stop. You get a full breakdown in chat plus a live HUD overlay with color-coded stats.
That's it. No config files, no setup, no menus.
What It Tracks
Accuracy & Timing
- Hit/miss ratio — what percentage of your swings actually connect
- Cooldown timing — are you clicking too early and losing damage?
- CPS — are you swinging faster than the cooldown allows?
Aim Quality
- Overflick detection — tracks when your crosshair passes through the target, meaning you flicked past them
- Shield hit percentage — how often you're wasting hits on a blocking player
Spacing & Reach
- Reach distribution — categorizes every hit as close (<2.0), mid (2.0-2.8), long (2.9-3.0), or edge (3.0+)
- Shows if you're fighting too close, too far, or right in the sweet spot
Defense
- Jump reset tracking — detects when you jump within 3 ticks of taking knockback
- Jump reset percentage — compared to total KB events received
Post-Fight Tips
After each session, the mod analyzes your stats and generates personalized tips:
❌ *Accuracy is low (38%). Focus on tracking before clicking.
⚠ *Moderate overflicks (12%). Practice smoother tracking.
⚠ *23% of hits were too early. Wait for full cooldown — you're losing damage.
✅ *Excellent jump resets (78%)! You're minimizing KB well.
Tips adjust based on your actual numbers — they're not generic advice.
Live HUD
A compact overlay in the top-left corner shows your stats updating in real time during the fight. Color coded: green = you're doing well, yellow = room to improve, red = needs work.
Toggle the HUD with F7.
Keybinds
| Key |
Action |
| F6 |
Start / stop recording |
| F7 |
Show / hide HUD overlay |
Installation
- Install Fabric Loader for 1.21.8
- Install Fabric API
- Drop
pvp-analyzer-1.0.0.jar into your mods folder
- Launch the game
FAQ
Does this modify gameplay in any way?*
No. It only observes and records. No packets are modified, no inputs are changed, nothing is automated. It's a pure analytics tool.
Will this get me banned?
It's a client-side observer mod — it doesn't interact with the server beyond normal gameplay. It's equivalent to recording your screen and reviewing the footage, but with automatic stat tracking.
Does it work on servers?
Yes, any server. It tracks your client-side actions and events. No server permission needed.
Does it affect FPS?
Negligible. The tracking logic runs a few comparisons per tick. The HUD is a small text overlay. You won't notice it.
Requires: Fabric Loader 0.16.14+ · Fabric API · Minecraft 1.21+
Environment: Client only
License: MIT
Github repo:
评论 0
登录后参与评分
还没有评论,来抢沙发吧