Compatemon
一个 Cobblemon 模组插件
本模组旨在将精彩的 Cobblemon 世界与其他优秀的 Minecraft 模组进行整合。
各个模块应完全独立,无需加载其他模块即可正常工作。不过,模块之间确实存在一些额外的集成!
你可能会问:“这有什么意义呢?” 我的朋友,意义在于 沉浸感。
功能
- 并非所有模块都同时支持 Forge 和 Fabric。开发重点放在 Forge 上,但也进行了测试以确保在可行的情况下支持 Fabric。
- 每个模块都有自己的配置文件。当然推荐保持默认值,但在大多数情况下也进行过边缘情况的测试。对于超出默认值的设置所引发的问题我们会予以考虑,但优先级较低。
Pehkui 模块
支持 Fabric 和 Forge!
你是否曾希望你的 Minecraft 世界感觉更加 多样化?通过 Pehkui 模块,你可以为你的生活增添一些变化!
宝可梦将以默认范围的 25% 到 150% 的正常大小生成。但这并非完全随机!大小的分布呈以 100% 为中心的钟形曲线。这些默认值是可配置的,但请注意,当碰撞箱和边界框变得过大时,Minecraft 的人工智能可能会失效!
Sophisticated Module - Sophisticated Storage
仅限 Forge
你是否曾希望你的存储控制器能链接到超过 16 格远的容器?这个问题解决了!通过将数值配置高达 256 格,你的存储系统可以实现飞跃式增长。
- 严格来说,此功能并非与 Cobblemon 的真正集成。但是!而且还有个但是!!会有那个但是的!敬请期待!
Apotheosis 模块
仅限 Forge
你是否曾希望在 Cobblemon 中拥有 Boss?通过 Apotheosis 模块,你的梦想将成为现实!PokeBosses 使用基础模组内置的逻辑生成,但生成位置相对于玩家而言,与普通宝可梦相同。预计 Boss 会比普通宝可梦稍强,请小心应对!
- 注意:PokeBosses 拥有更多的心数,其属性和效果与 Apotheosis Bosses 一样进行缩放。目前,它们作为 Boss 的身份对其战斗中的属性没有影响。但这 是 计划之中的,所以敬请期待!
PokeBosses 默认是可以捕获的,因为它们本质上只是更强版本的普通宝可梦。不过有一个例外!当 PokeBoss 从 Boss 刷怪笼生成时,它将 不可 被捕获。这是由于不同的逻辑导致由此生成的宝可梦完全随机。从最小的 Joltik 到最大的 Wailord,甚至包括已实现的 Moltres 和其他传说宝可梦。这可以在配置文件中更改,但由于目标是模组间的自然集成,你需要自行决定是否启用此功能!
目前,此模块集成了 Pehkui 模块,以便单独调整 Boss 的大小,而不影响其他模组。这是可配置的,如果未启用(且未安装)Pehkui 模块,则不会有任何效果。
此外,还为 Apotheosis 的附魔模块添加了一些额外的模组方块。除非你安装了特定的模组,否则不应产生任何影响。
Compatemon 模块
啊是的,我最喜欢的模块。目前,此模块用于处理任何 Cobblemon 特定或原版相关的更改,这些更改不属于 真正的 兼容性或其他内容。
截至目前,此模块中唯一的功能是更改默认昵称长度的设置。根据 Cobblemon 的默认设置,最长昵称为 12 个字符,而这 远远不够好。
- 是的,我知道 GUI 处理超过 12 个字符的昵称效果不佳。我想让这些字段自动滚动或截断或类似的操作,但我还没有来得及实现。
未来计划
在 TODO 文件中有一个很长的模组列表,我已经考虑过将这些模组与 Compatemon 进行集成。然而,我 开放 接受来自 Forge 或 Fabric 的任何模组的建议。我会优先编写那些我觉得有趣的代码!但由于这是一个非常模糊的标准,我更有可能去处理涉及大量更改的内容,或者是我在日常整合包中经常使用的模组。也愿意优先考虑跨平台模组而非单平台模组,如果是仅 Fabric 的模组,祝你好运?理论上可以使用 Sinytra 集成仅 Fabric 的模组,但我尚未对此进行过实验。
Compatemon
A Cobblemon Addon
This mod is designed to integrate the wonderful world of Cobblemon with other wonderful minecraft mods.
Each module should be fully independent and work without any of the others being loaded.There are additional integrations between the modules, however!
You may be asking yourself, "What's the point?" The point, my dear friend, is IMMERSION.
Features
- Not all modules are available for both Forge and Fabric. Development was focused on Forge, but testing did occur to make sure Fabric was supported where available.
- Each module has its own config file. The default values are recommended, of course, but testing has occurred at the fringes (in most cases). Any issues with values outside the default will be considered, but considered less important.
The Pehkui Module
Fabric and Forge!
Have you ever wanted your minecraft world to feel just a bit more varied? With the Pehkui Module, you can add a bit of variety to your life!
Pokemon will spawn in at a default range of 25% of their normal size to 150%! This isn't fully random, however! The distribution of sizes is on a bell curve centered around 100%. These default values are configurable, but be warned, as minecraft AI tends to break when hitboxes and bounding boxes get too large!
The Sophisticated Module - Sophisticated Storage
Forge Only
Have you ever wanted your storage controller to link to containers more than 16 blocks away? This fixes that! With a value fully configurable up to 256 blocks, your storage system can grow by leaps and bounds.
- Technically, this feature isn't truly an integration with Cobblemon. HOWEVER! And there is a however!! There will be! Stay tuned!
The Apotheosis Module
Forge Only
Have you ever wanted to have Bosses in Cobblemon? With the Apotheosis Module, your dream is a reality! PokeBosses spawn using the logic built in the base mod, but spawns are relative to the player, same as normal pokemon. You can expect the bosses to be a bit stronger than normal pokemon, so look out!
- Note: PokeBosses have more hearts and have their attributes/effects scaled same as Apotheosis bosses. Currently, their being a boss has no bearing on their in battle stats. This is planned however, so stay tuned!
PokeBosses are normally catchable by default, as essentially they're just stronger versions of normal pokemon. There is a catch, though! When a PokeBoss spawns from a boss spawner, it will NOT be catchable. This is due to slightly different logic that causes the pokemon spawned from these to be completely random. From the smallest Joltik to the largest Wailord, to even Moltres and other legendaries already implemented. This can be changed in the config, but as the goal is a natural integration between mods, you'll have to make the decision to enable this yourself!
Currently, this integrates with the Pehkui Module to have adjustable sizing for bosses separately than normal mods. This is configurable, and will not do anything if the Pehkui Module is not enabled (and installed)
This also adds a few extra modded blocks to the enchanting module of Apotheosis. Shouldn't have any effect unless you have the specific mods installed.
The Compatemon Module
Ah yes, my favorite module. Currently, this module is for any Cobblemon specific or Vanilla related changes that aren't really compatibility or anything else.
As of now, the only thing in this module is a setting for changing the default nickname length. By Cobblemon default, the longest nickname is 12 characters, and that's Just Not Good Enough.
- Yes, I'm aware the GUI doesn't handle nicknames larger than 12 characters very well. I want to make those fields auto-scroll or cut off or something similar, but I haven't gotten to it yet.
Future Plans
There's a biiiiiig list of mods in the TODO file that I've considered for Compatemon intergratabilities. However, I am OPEN to suggestions for ANY mod across the board, Forge or Fabric. I'll prioritize things as what is fun to code! But since that's a really vague standard, I'm more likely to work on something that has a LOT of changes involved, or that I use a lot in my normal modpacks. Also willing to prioritize cross platform mods over single platform ones, and if it's fabric only, good luck? Theoretically, could integrate fabric only mods too using sinytra, but I haven't experimented with that.
评论 0
登录后参与评分
还没有评论,来抢沙发吧